[PATCH 2/5] hw/arm/aspeed: Select console UART from machine

[pdel]

From: Peter Delevoryas <pdel@fb.com>

This change replaces the UART serial device initialization code with machine
configuration data, making it so that we have a single code path for console
UART initialization, but allowing different machines to use different
UART's. This is relevant because the Aspeed chips have 2 debug UART's, UART5
and UART1, and while most machines just use UART5, some use UART1.

Signed-off-by: Peter Delevoryas <pdel@fb.com>
---
 hw/arm/aspeed.c         | 7 +++++++
 hw/arm/aspeed_ast2600.c | 5 -----
 hw/arm/aspeed_soc.c     | 5 -----
 include/hw/arm/aspeed.h | 1 +
 4 files changed, 8 insertions(+), 10 deletions(-)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 9d43e26c51..ff53d12395 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -14,6 +14,7 @@
 #include "hw/arm/boot.h"
 #include "hw/arm/aspeed.h"
 #include "hw/arm/aspeed_soc.h"
+#include "hw/char/serial.h"
 #include "hw/i2c/i2c_mux_pca954x.h"
 #include "hw/i2c/smbus_eeprom.h"
 #include "hw/misc/pca9552.h"
@@ -21,6 +22,7 @@
 #include "hw/misc/led.h"
 #include "hw/qdev-properties.h"
 #include "sysemu/block-backend.h"
+#include "sysemu/sysemu.h"
 #include "hw/loader.h"
 #include "qemu/error-report.h"
 #include "qemu/units.h"
@@ -352,6 +354,10 @@ static void aspeed_machine_init(MachineState *machine)
     }
     qdev_realize(DEVICE(&bmc->soc), NULL, &error_abort);
 
+    serial_mm_init(get_system_memory(), sc->memmap[amc->serial_dev], 2,
+                   sc->get_irq(&bmc->soc, amc->serial_dev), 38400,
+                   serial_hd(0), DEVICE_LITTLE_ENDIAN);
+
     memory_region_add_subregion(get_system_memory(),
                                 sc->memmap[ASPEED_DEV_SDRAM],
                                 &bmc->ram_container);
@@ -804,6 +810,7 @@ static void aspeed_machine_class_init(ObjectClass *oc, void 
*data)
     mc->no_parallel = 1;
     mc->default_ram_id = "ram";
     amc->macs_mask = ASPEED_MAC0_ON;
+    amc->serial_dev = ASPEED_DEV_UART5;
 
     aspeed_machine_class_props_init(oc);
 }
diff --git a/hw/arm/aspeed_ast2600.c b/hw/arm/aspeed_ast2600.c
index 56e1adb343..a27b0de482 100644
--- a/hw/arm/aspeed_ast2600.c
+++ b/hw/arm/aspeed_ast2600.c
@@ -322,11 +322,6 @@ static void aspeed_soc_ast2600_realize(DeviceState *dev, 
Error **errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
     }
 
-    /* UART - attach an 8250 to the IO space as our UART5 */
-    serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
-                   aspeed_soc_get_irq(s, ASPEED_DEV_UART5),
-                   38400, serial_hd(0), DEVICE_LITTLE_ENDIAN);
-
     /* I2C */
     object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
                              &error_abort);
diff --git a/hw/arm/aspeed_soc.c b/hw/arm/aspeed_soc.c
index c373182299..0c09d1e5b4 100644
--- a/hw/arm/aspeed_soc.c
+++ b/hw/arm/aspeed_soc.c
@@ -287,11 +287,6 @@ static void aspeed_soc_realize(DeviceState *dev, Error 
**errp)
         sysbus_connect_irq(SYS_BUS_DEVICE(&s->timerctrl), i, irq);
     }
 
-    /* UART - attach an 8250 to the IO space as our UART5 */
-    serial_mm_init(get_system_memory(), sc->memmap[ASPEED_DEV_UART5], 2,
-                   aspeed_soc_get_irq(s, ASPEED_DEV_UART5), 38400,
-                   serial_hd(0), DEVICE_LITTLE_ENDIAN);
-
     /* I2C */
     object_property_set_link(OBJECT(&s->i2c), "dram", OBJECT(s->dram_mr),
                              &error_abort);
diff --git a/include/hw/arm/aspeed.h b/include/hw/arm/aspeed.h
index c9747b15fc..9f5b9f04d6 100644
--- a/include/hw/arm/aspeed.h
+++ b/include/hw/arm/aspeed.h
@@ -38,6 +38,7 @@ struct AspeedMachineClass {
     uint32_t num_cs;
     uint32_t macs_mask;
     void (*i2c_init)(AspeedMachineState *bmc);
+    uint32_t serial_dev;
 };
 
 
-- 
2.30.2