[PATCH for-6.2 19/25] hw/arm/msf2: Use Clock input to MSF2_SOC instead of m3clk property

[Peter Maydell]

Instead of passing the MSF2 SoC an integer property specifying the
CPU clock rate, pass it a Clock instead.  This lets us wire that
clock up to the armv7m object.

Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
 include/hw/arm/msf2-soc.h |  3 ++-
 hw/arm/msf2-soc.c         | 28 +++++++++++++++++-----------
 hw/arm/msf2-som.c         |  7 ++++++-
 3 files changed, 25 insertions(+), 13 deletions(-)

diff --git a/include/hw/arm/msf2-soc.h b/include/hw/arm/msf2-soc.h
index 38e10ce20aa..01f904cec47 100644
--- a/include/hw/arm/msf2-soc.h
+++ b/include/hw/arm/msf2-soc.h
@@ -30,6 +30,7 @@
 #include "hw/misc/msf2-sysreg.h"
 #include "hw/ssi/mss-spi.h"
 #include "hw/net/msf2-emac.h"
+#include "hw/clock.h"
 #include "qom/object.h"
 
 #define TYPE_MSF2_SOC     "msf2-soc"
@@ -57,7 +58,7 @@ struct MSF2State {
     uint64_t envm_size;
     uint64_t esram_size;
 
-    uint32_t m3clk;
+    Clock *m3clk;
     uint8_t apb0div;
     uint8_t apb1div;
 
diff --git a/hw/arm/msf2-soc.c b/hw/arm/msf2-soc.c
index f36788054b3..0a1e594aee6 100644
--- a/hw/arm/msf2-soc.c
+++ b/hw/arm/msf2-soc.c
@@ -29,6 +29,7 @@
 #include "hw/char/serial.h"
 #include "hw/arm/msf2-soc.h"
 #include "hw/misc/unimp.h"
+#include "hw/qdev-clock.h"
 #include "sysemu/sysemu.h"
 
 #define MSF2_TIMER_BASE       0x40004000
@@ -73,6 +74,8 @@ static void m2sxxx_soc_initfn(Object *obj)
     }
 
     object_initialize_child(obj, "emac", &s->emac, TYPE_MSS_EMAC);
+
+    s->m3clk = qdev_init_clock_in(DEVICE(obj), "m3clk", NULL, NULL, 0);
 }
 
 static void m2sxxx_soc_realize(DeviceState *dev_soc, Error **errp)
@@ -84,6 +87,11 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error 
**errp)
 
     MemoryRegion *system_memory = get_system_memory();
 
+    if (!clock_has_source(s->m3clk)) {
+        error_setg(errp, "m3clk must be wired up by the board code");
+        return;
+    }
+
     memory_region_init_rom(&s->nvm, OBJECT(dev_soc), "MSF2.eNVM", s->envm_size,
                            &error_fatal);
     /*
@@ -106,19 +114,14 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, 
Error **errp)
     qdev_prop_set_uint32(armv7m, "num-irq", 81);
     qdev_prop_set_string(armv7m, "cpu-type", s->cpu_type);
     qdev_prop_set_bit(armv7m, "enable-bitband", true);
+    qdev_connect_clock_in(armv7m, "cpuclk", s->m3clk);
     object_property_set_link(OBJECT(&s->armv7m), "memory",
                              OBJECT(get_system_memory()), &error_abort);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->armv7m), errp)) {
         return;
     }
 
-    if (!s->m3clk) {
-        error_setg(errp, "Invalid m3clk value");
-        error_append_hint(errp, "m3clk can not be zero\n");
-        return;
-    }
-
-    system_clock_scale = NANOSECONDS_PER_SECOND / s->m3clk;
+    system_clock_scale = clock_ticks_to_ns(s->m3clk, 1);
 
     for (i = 0; i < MSF2_NUM_UARTS; i++) {
         if (serial_hd(i)) {
@@ -129,8 +132,13 @@ static void m2sxxx_soc_realize(DeviceState *dev_soc, Error 
**errp)
     }
 
     dev = DEVICE(&s->timer);
-    /* APB0 clock is the timer input clock */
-    qdev_prop_set_uint32(dev, "clock-frequency", s->m3clk / s->apb0div);
+    /*
+     * APB0 clock is the timer input clock.
+     * TODO: ideally the MSF2 timer device should use a Clock rather than a
+     * clock-frequency integer property.
+     */
+    qdev_prop_set_uint32(dev, "clock-frequency",
+                         clock_get_hz(s->m3clk) / s->apb0div);
     if (!sysbus_realize(SYS_BUS_DEVICE(&s->timer), errp)) {
         return;
     }
@@ -207,8 +215,6 @@ static Property m2sxxx_soc_properties[] = {
     DEFINE_PROP_UINT64("eNVM-size", MSF2State, envm_size, MSF2_ENVM_MAX_SIZE),
     DEFINE_PROP_UINT64("eSRAM-size", MSF2State, esram_size,
                         MSF2_ESRAM_MAX_SIZE),
-    /* Libero GUI shows 100Mhz as default for clocks */
-    DEFINE_PROP_UINT32("m3clk", MSF2State, m3clk, 100 * 1000000),
     /* default divisors in Libero GUI */
     DEFINE_PROP_UINT8("apb0div", MSF2State, apb0div, 2),
     DEFINE_PROP_UINT8("apb1div", MSF2State, apb1div, 2),
diff --git a/hw/arm/msf2-som.c b/hw/arm/msf2-som.c
index 343ec977c07..396e8b99138 100644
--- a/hw/arm/msf2-som.c
+++ b/hw/arm/msf2-som.c
@@ -29,6 +29,7 @@
 #include "hw/boards.h"
 #include "hw/qdev-properties.h"
 #include "hw/arm/boot.h"
+#include "hw/qdev-clock.h"
 #include "exec/address-spaces.h"
 #include "hw/arm/msf2-soc.h"
 
@@ -49,6 +50,7 @@ static void emcraft_sf2_s2s010_init(MachineState *machine)
     BusState *spi_bus;
     MemoryRegion *sysmem = get_system_memory();
     MemoryRegion *ddr = g_new(MemoryRegion, 1);
+    Clock *m3clk;
 
     if (strcmp(machine->cpu_type, mc->default_cpu_type) != 0) {
         error_report("This board can only be used with CPU %s",
@@ -72,7 +74,10 @@ static void emcraft_sf2_s2s010_init(MachineState *machine)
      * in Libero. CPU clock is divided by APB0 and APB1 divisors for
      * peripherals. Emcraft's SoM kit comes with these settings by default.
      */
-    qdev_prop_set_uint32(dev, "m3clk", 142 * 1000000);
+    /* This clock doesn't need migration because it is fixed-frequency */
+    m3clk = clock_new(OBJECT(machine), "m3clk");
+    clock_set_hz(m3clk, 142 * 1000000);
+    qdev_connect_clock_in(dev, "m3clk", m3clk);
     qdev_prop_set_uint32(dev, "apb0div", 2);
     qdev_prop_set_uint32(dev, "apb1div", 2);
 
-- 
2.20.1