[PATCH v2 31/35] acpi: arm/virt: build_spcr: use acpi_init_table()/acpi_table_composed() instead of build_header()

[Igor Mammedov]

it replaces error-prone pointer arithmetic for build_header() API,
with 2 calls to start and finish table creation,
which hides offsets magic from API user.

while at it, replace packed structure with endian agnostic
build_append_FOO() API.

Signed-off-by: Igor Mammedov <imammedo@redhat.com>
---
CC: drjones@redhat.com
CC: peter.maydell@linaro.org
CC: shannon.zhaosl@gmail.com
CC: qemu-arm@nongnu.org
---
 include/hw/acpi/acpi-defs.h | 32 -----------------
 hw/arm/virt-acpi-build.c    | 68 ++++++++++++++++++++++---------------
 2 files changed, 41 insertions(+), 59 deletions(-)

diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
index 6f2f08a9de..012c4ffb3a 100644
--- a/include/hw/acpi/acpi-defs.h
+++ b/include/hw/acpi/acpi-defs.h
@@ -117,38 +117,6 @@ typedef struct AcpiFadtData {
 #define ACPI_FADT_ARM_PSCI_COMPLIANT  (1 << 0)
 #define ACPI_FADT_ARM_PSCI_USE_HVC    (1 << 1)
 
-/*
- * Serial Port Console Redirection Table (SPCR), Rev. 1.02
- *
- * For .interface_type see Debug Port Table 2 (DBG2) serial port
- * subtypes in Table 3, Rev. May 22, 2012
- */
-struct AcpiSerialPortConsoleRedirection {
-    ACPI_TABLE_HEADER_DEF
-    uint8_t  interface_type;
-    uint8_t  reserved1[3];
-    struct AcpiGenericAddress base_address;
-    uint8_t  interrupt_types;
-    uint8_t  irq;
-    uint32_t gsi;
-    uint8_t  baud;
-    uint8_t  parity;
-    uint8_t  stopbits;
-    uint8_t  flowctrl;
-    uint8_t  term_type;
-    uint8_t  reserved2;
-    uint16_t pci_device_id;
-    uint16_t pci_vendor_id;
-    uint8_t  pci_bus;
-    uint8_t  pci_slot;
-    uint8_t  pci_func;
-    uint32_t pci_flags;
-    uint8_t  pci_seg;
-    uint32_t reserved3;
-} QEMU_PACKED;
-typedef struct AcpiSerialPortConsoleRedirection
-               AcpiSerialPortConsoleRedirection;
-
 /*
  * ACPI 1.0 Firmware ACPI Control Structure (FACS)
  */
diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
index a07540affb..e8553dcae5 100644
--- a/hw/arm/virt-acpi-build.c
+++ b/hw/arm/virt-acpi-build.c
@@ -349,39 +349,53 @@ build_iort(GArray *table_data, BIOSLinker *linker, 
VirtMachineState *vms)
     acpi_table_composed(linker, &table);
 }
 
+/*
+ * Serial Port Console Redirection Table (SPCR)
+ * Rev: 1.07
+ */
 static void
 build_spcr(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
 {
-    AcpiSerialPortConsoleRedirection *spcr;
-    const MemMapEntry *uart_memmap = &vms->memmap[VIRT_UART];
-    int irq = vms->irqmap[VIRT_UART] + ARM_SPI_BASE;
-    int spcr_start = table_data->len;
-
-    spcr = acpi_data_push(table_data, sizeof(*spcr));
-
-    spcr->interface_type = 0x3;    /* ARM PL011 UART */
-
-    spcr->base_address.space_id = AML_AS_SYSTEM_MEMORY;
-    spcr->base_address.bit_width = 8;
-    spcr->base_address.bit_offset = 0;
-    spcr->base_address.access_width = 1;
-    spcr->base_address.address = cpu_to_le64(uart_memmap->base);
-
-    spcr->interrupt_types = (1 << 3); /* Bit[3] ARMH GIC interrupt */
-    spcr->gsi = cpu_to_le32(irq);  /* Global System Interrupt */
+    AcpiTable table = { .sig = "SPCR", .rev = 2, .oem_id = vms->oem_id,
+                        .oem_table_id = vms->oem_table_id };
 
-    spcr->baud = 3;                /* Baud Rate: 3 = 9600 */
-    spcr->parity = 0;              /* No Parity */
-    spcr->stopbits = 1;            /* 1 Stop bit */
-    spcr->flowctrl = (1 << 1);     /* Bit[1] = RTS/CTS hardware flow control */
-    spcr->term_type = 0;           /* Terminal Type: 0 = VT100 */
+    acpi_init_table(&table, table_data);
 
-    spcr->pci_device_id = 0xffff;  /* PCI Device ID: not a PCI device */
-    spcr->pci_vendor_id = 0xffff;  /* PCI Vendor ID: not a PCI device */
+    /* Interface Type */
+    build_append_int_noprefix(table_data, 3, 1); /* ARM PL011 UART */
+    build_append_int_noprefix(table_data, 0, 3); /* Reserved */
+    /* Base Address */
+    build_append_gas(table_data, AML_AS_SYSTEM_MEMORY, 8, 0, 1,
+                     vms->memmap[VIRT_UART].base);
+    /* Interrupt Type */
+    build_append_int_noprefix(table_data,
+        (1 << 3) /* Bit[3] ARMH GIC interrupt */, 1);
+    build_append_int_noprefix(table_data, 0, 1); /* IRQ */
+    /* Global System Interrupt */
+    build_append_int_noprefix(table_data,
+                              vms->irqmap[VIRT_UART] + ARM_SPI_BASE, 4);
+    build_append_int_noprefix(table_data, 3 /* 9600 */, 1); /* Baud Rate */
+    build_append_int_noprefix(table_data, 0 /* No Parity */, 1); /* Parity */
+    /* Stop Bits */
+    build_append_int_noprefix(table_data, 1 /* 1 Stop bit */, 1);
+    /* Flow Control */
+    build_append_int_noprefix(table_data,
+        (1 << 1) /* RTS/CTS hardware flow control */, 1);
+    /* Terminal Type */
+    build_append_int_noprefix(table_data, 0 /* VT100 */, 1);
+    build_append_int_noprefix(table_data, 0, 1); /* Language */
+    /* PCI Device ID  */
+    build_append_int_noprefix(table_data, 0xffff /* not a PCI device*/, 2);
+    /* PCI Vendor ID */
+    build_append_int_noprefix(table_data, 0xffff /* not a PCI device*/, 2);
+    build_append_int_noprefix(table_data, 0, 1); /* PCI Bus Number */
+    build_append_int_noprefix(table_data, 0, 1); /* PCI Device Number */
+    build_append_int_noprefix(table_data, 0, 1); /* PCI Function Number */
+    build_append_int_noprefix(table_data, 0, 4); /* PCI Flags */
+    build_append_int_noprefix(table_data, 0, 1); /* PCI Segment */
+    build_append_int_noprefix(table_data, 0, 4); /* Reserved */
 
-    build_header(linker, table_data, (void *)(table_data->data + spcr_start),
-                 "SPCR", table_data->len - spcr_start, 2, vms->oem_id,
-                 vms->oem_table_id);
+    acpi_table_composed(linker, &table);
 }
 
 /*
-- 
2.27.0