qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH v4 1/8] hw/pci/pci_host: Allow bypass iommu for pci host


From: Eric Auger
Subject: Re: [PATCH v4 1/8] hw/pci/pci_host: Allow bypass iommu for pci host
Date: Wed, 2 Jun 2021 14:18:29 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.10.1

Hi Xingang,

On 5/25/21 5:49 AM, Wang Xingang wrote:
> From: Xingang Wang <wangxingang5@huawei.com>
>
> This add a bypass_iommu property for pci host, which indicates
> whether devices attached to the pci root bus will bypass iommu.
> In pci_device_iommu_address_space(), add a bypass_iommu check
> to avoid getting iommu address space for devices bypass iommu.
>
> Signed-off-by: Xingang Wang <wangxingang5@huawei.com>
> ---
>  hw/pci/pci.c              | 18 +++++++++++++++++-
>  hw/pci/pci_host.c         |  2 ++
>  include/hw/pci/pci.h      |  1 +
>  include/hw/pci/pci_host.h |  1 +
>  4 files changed, 21 insertions(+), 1 deletion(-)
>
> diff --git a/hw/pci/pci.c b/hw/pci/pci.c
> index 377084f1a8..27d588e268 100644
> --- a/hw/pci/pci.c
> +++ b/hw/pci/pci.c
> @@ -416,6 +416,22 @@ const char *pci_root_bus_path(PCIDevice *dev)
>      return rootbus->qbus.name;
>  }
>  
> +bool pci_bus_bypass_iommu(PCIBus *bus)
> +{
> +    PCIBus *rootbus = bus;
> +    PCIHostState *host_bridge;
> +
> +    if (!pci_bus_is_root(bus)) {
> +        rootbus = pci_device_root_bus(bus->parent_dev);
> +    }
> +
> +    host_bridge = PCI_HOST_BRIDGE(rootbus->qbus.parent);
> +
> +    assert(host_bridge->bus == rootbus);
> +
> +    return host_bridge->bypass_iommu;
> +}
> +
>  static void pci_root_bus_init(PCIBus *bus, DeviceState *parent,
>                                MemoryRegion *address_space_mem,
>                                MemoryRegion *address_space_io,
> @@ -2718,7 +2734,7 @@ AddressSpace *pci_device_iommu_address_space(PCIDevice 
> *dev)
>  
>          iommu_bus = parent_bus;
>      }
> -    if (iommu_bus && iommu_bus->iommu_fn) {
> +    if (!pci_bus_bypass_iommu(bus) && iommu_bus && iommu_bus->iommu_fn) {
>          return iommu_bus->iommu_fn(bus, iommu_bus->iommu_opaque, devfn);
>      }
>      return &address_space_memory;
> diff --git a/hw/pci/pci_host.c b/hw/pci/pci_host.c
> index 8ca5fadcbd..2768db53e6 100644
> --- a/hw/pci/pci_host.c
> +++ b/hw/pci/pci_host.c
> @@ -222,6 +222,8 @@ const VMStateDescription vmstate_pcihost = {
>  static Property pci_host_properties_common[] = {
>      DEFINE_PROP_BOOL("x-config-reg-migration-enabled", PCIHostState,
>                       mig_enabled, true),
> +    DEFINE_PROP_BOOL("pci-host-bypass-iommu", PCIHostState,
> +                     bypass_iommu, false),
"bypass-iommu" may be sufficient.

Besides:

Reviewed-by: Eric Auger <eric.auger@redhat.com>
Thanks

Eric

>      DEFINE_PROP_END_OF_LIST(),
>  };
>  
> diff --git a/include/hw/pci/pci.h b/include/hw/pci/pci.h
> index 6be4e0c460..f4d51b672b 100644
> --- a/include/hw/pci/pci.h
> +++ b/include/hw/pci/pci.h
> @@ -480,6 +480,7 @@ void pci_for_each_bus(PCIBus *bus,
>  
>  PCIBus *pci_device_root_bus(const PCIDevice *d);
>  const char *pci_root_bus_path(PCIDevice *dev);
> +bool pci_bus_bypass_iommu(PCIBus *bus);
>  PCIDevice *pci_find_device(PCIBus *bus, int bus_num, uint8_t devfn);
>  int pci_qdev_find_device(const char *id, PCIDevice **pdev);
>  void pci_bus_get_w64_range(PCIBus *bus, Range *range);
> diff --git a/include/hw/pci/pci_host.h b/include/hw/pci/pci_host.h
> index 52e038c019..c6f4eb4585 100644
> --- a/include/hw/pci/pci_host.h
> +++ b/include/hw/pci/pci_host.h
> @@ -43,6 +43,7 @@ struct PCIHostState {
>      uint32_t config_reg;
>      bool mig_enabled;
>      PCIBus *bus;
> +    bool bypass_iommu;
>  
>      QLIST_ENTRY(PCIHostState) next;
>  };




reply via email to

[Prev in Thread] Current Thread [Next in Thread]