[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v3 0/5] Add support for PMBus in QEMU
From: |
Titus Rwantare |
Subject: |
[PATCH v3 0/5] Add support for PMBus in QEMU |
Date: |
Tue, 18 May 2021 11:45:22 -0700 |
Hello,
This patch series adds an interface to start supporting PMBus devices in QEMU.
I’ve included two PMBus devices: MAX34451 and ADM1272.
PMBus is a variant of SMBus meant for digital management of power supplies.
PMBus adds to the SMBus standard by defining a number of constants and commands
used by compliant devices. The specification for PMBus can be found at:
https://pmbus.org/specification-archives/
Currently, the goal for these devices is to emulate basic functionality by
reading and writing registers. Timing, and some logical operation is not
implemented. This implementation supports nearly all available registers for
PMBus including:
- Voltage inputs and outputs
- Current inputs and outputs
- Temperature sensors
Unimplimented registers get passed through to the device model, and device
models can opt out of using the standard registers with flags. The included
devices make use of these fields and illustrate how to interface with the pmbus
class.
Datasheets for sensors:
https://datasheets.maximintegrated.com/en/ds/MAX34451.pdf
https://www.analog.com/media/en/technical-documentation/data-sheets/ADM1272.pdf
Since v2:
- bump for feedback
- removed commented out code
Since v1:
- addressed Joel's comments
- split out tests into their own patches
Thanks for reviewing,
Titus Rwantare
Titus Rwantare (5):
hw/i2c: add support for PMBus
hw/misc: add ADM1272 device
tests/qtest: add tests for ADM1272 device model
hw/misc: add MAX34451 device
tests/qtest: add tests for MAX34451 device model
include/hw/i2c/pmbus_device.h | 506 +++++++++++
hw/i2c/pmbus_device.c | 1596 +++++++++++++++++++++++++++++++++
hw/misc/adm1272.c | 543 +++++++++++
hw/misc/max34451.c | 716 +++++++++++++++
tests/qtest/adm1272-test.c | 445 +++++++++
tests/qtest/max34451-test.c | 336 +++++++
hw/arm/Kconfig | 3 +
hw/i2c/Kconfig | 4 +
hw/i2c/meson.build | 1 +
hw/misc/Kconfig | 8 +
hw/misc/meson.build | 2 +
tests/qtest/meson.build | 2 +
12 files changed, 4162 insertions(+)
create mode 100644 include/hw/i2c/pmbus_device.h
create mode 100644 hw/i2c/pmbus_device.c
create mode 100644 hw/misc/adm1272.c
create mode 100644 hw/misc/max34451.c
create mode 100644 tests/qtest/adm1272-test.c
create mode 100644 tests/qtest/max34451-test.c
--
2.31.1.751.gd2f1c929bd-goog
- [PATCH v3 0/5] Add support for PMBus in QEMU,
Titus Rwantare <=
- [PATCH v3 1/5] hw/i2c: add support for PMBus, Titus Rwantare, 2021/05/18
- [PATCH v3 2/5] hw/misc: add ADM1272 device, Titus Rwantare, 2021/05/18
- [PATCH v3 4/5] hw/misc: add MAX34451 device, Titus Rwantare, 2021/05/18
- [PATCH v3 3/5] tests/qtest: add tests for ADM1272 device model, Titus Rwantare, 2021/05/18
- [PATCH v3 5/5] tests/qtest: add tests for MAX34451 device model, Titus Rwantare, 2021/05/18
- Re: [PATCH v3 0/5] Add support for PMBus in QEMU, Corey Minyard, 2021/05/18