[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [RFC RESEND PATCH 0/4] hw/arm/virt-acpi-build: Introduce iommu optio
From: |
Auger Eric |
Subject: |
Re: [RFC RESEND PATCH 0/4] hw/arm/virt-acpi-build: Introduce iommu option for pci root bus |
Date: |
Wed, 10 Mar 2021 11:18:51 +0100 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:78.0) Gecko/20100101 Thunderbird/78.7.0 |
Hi Xingang,
On 3/10/21 3:13 AM, Wang Xingang wrote:
> Hi Eric,
>
> On 2021/3/9 22:36, Auger Eric wrote:
>> Hi,
>> On 2/27/21 9:33 AM, Wang Xingang wrote:
>>> From: Xingang Wang <wangxingang5@huawei.com>
>>>
>>> These patches add support for configure iommu on/off for pci root bus,
>>> including primary bus and pxb root bus. At present, All root bus will go
>>> through iommu when iommu is configured, which is not flexible.
>>>
>>> So this add option to enable/disable iommu for primary bus and pxb
>>> root bus.
>>> When iommu is enabled for the root bus, devices attached to it will go
>>> through iommu. When iommu is disabled for the root bus, devices will not
>>> go through iommu accordingly.
>>
>> Please could you give an example of the qemu command line for which the
>> new option is useful for you. This would help me to understand your
>> pcie/pci topology and also make sure I test it with the smmu.
>>
>> Thank you in advance
>>
>> Best Regards
>>
>> Eric
>>>
>>> Xingang Wang (4):
>>> pci: Add PCI_BUS_IOMMU property
>>> hw/pci: Add iommu option for pci root bus
>>> hw/pci: Add pci_root_bus_max_bus
>>> hw/arm/virt-acpi-build: Add explicit idmap info in IORT table
>>>
>>> hw/arm/virt-acpi-build.c | 92 +++++++++++++++++++++--------
>>> hw/arm/virt.c | 29 +++++++++
>>> hw/pci-bridge/pci_expander_bridge.c | 6 ++
>>> hw/pci/pci.c | 35 ++++++++++-
>>> include/hw/arm/virt.h | 1 +
>>> include/hw/pci/pci.h | 1 +
>>> include/hw/pci/pci_bus.h | 13 ++++
>>> 7 files changed, 153 insertions(+), 24 deletions(-)
>>>
>>
>> .
>>
>
> Thanks for your advice.
>
> I test this with the following script, in which i add two options.
>
> The option `primary_bus_iommu=false(or true)` for `-machine
> virt,iommu=smmuv3`, this helps to enable/disable whether primary bus go
> through iommu.
>
> The other option `iommu=false` or `iommu=true` for `-device pxb-pcie`
> helps to enable/disable whether pxb root bus go through iommu.
>
>> #!/bin/sh
>>
>> /path/to/qemu/build/aarch64-softmmu/qemu-system-aarch64 \
>> -enable-kvm \
>> -cpu host \
>> -kernel /path/to/linux/arch/arm64/boot/Image \
>> -m 16G \
>> -smp 8,sockets=8,cores=1,threads=1 \
>> -machine
>> virt,kernel_irqchip=on,gic-version=3,iommu=smmuv3,primary_bus_iommu=false
>> \
>> -drive
>> file=./QEMU_EFI-pflash.raw,if=pflash,format=raw,unit=0,readonly=on \
>> -device
>> pxb-pcie,bus_nr=0x10,id=pci.10,bus=pcie.0,addr=0x3.0x1,iommu=false \
>> -device
>> pxb-pcie,bus_nr=0x20,id=pci.20,bus=pcie.0,addr=0x3.0x2,iommu=true \
>> -device
>> pxb-pcie,bus_nr=0x23,id=pci.30,bus=pcie.0,addr=0x3.0x3,iommu=true \
>> -device
>> pxb-pcie,bus_nr=0x40,id=pci.40,bus=pcie.0,addr=0x3.0x4,iommu=false \
>> -device pcie-pci-bridge,id=pci.11,bus=pci.10,addr=0x1 \
>> -device pcie-pci-bridge,id=pci.21,bus=pci.20,addr=0x1 \
>> -device
>> pcie-root-port,port=0x20,chassis=10,id=pci.2,bus=pcie.0,addr=0x2 \
>> -device
>> pcie-root-port,port=0x20,chassis=11,id=pci.12,bus=pci.10,addr=0x2 \
>> -device
>> pcie-root-port,port=0x20,chassis=19,id=pci.19,bus=pci.11,addr=0x3 \
>> -device
>> pcie-root-port,port=0x20,chassis=12,id=pci.22,bus=pci.20,addr=0x2 \
>> -device
>> pcie-root-port,port=0x20,chassis=13,id=pci.42,bus=pci.40,addr=0x2 \
>> -device virtio-scsi-pci,id=scsi0,bus=pci.12,addr=0x1 \
>> -device vfio-pci,host=b5:00.2,bus=pci.42,addr=0x0,id=acc2 \
>> -net none \
>> -initrd /path/to/rootfs.cpio.gz \
>> -nographic \
>> -append "rdinit=init console=ttyAMA0 earlycon=pl011,0x9000000 nokaslr" \
>
> I test the command line with an accelerator. The IORT table will have
> some changes, so only the root bus with iommu=true will go through smmuv3.
Thank you for sharing your command line.
On my end without using ",iommu=smmuv3" and the new options, my guest
crashes.
0.833665] ACPI: PCI Root Bridge [PC0A] (domain 0000 [bus 0a-0b])
[ 0.837630] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM
ClockPM Segments MSI HPX-Type3]
[ 0.843377] acpi PNP0A08:00: _OSC: platform does not support [LTR]
[ 0.846796] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME
AER PCIeCapability]
[ 0.851082] acpi PNP0A08:00: ECAM area [mem
0x4010a00000-0x4010bfffff] reserved by PNP0C02:00
[ 0.854742] acpi PNP0A08:00: ECAM at [mem 0x4010a00000-0x4010bfffff]
for [bus 0a-0b]
[ 0.859569] ------------[ cut here ]------------
[ 0.862470] kernel BUG at mm/ioremap.c:76!
[ 0.865066] Internal error: Oops - BUG: 0 [#1] SMP
[ 0.868130] Modules linked in:
[ 0.870060] CPU: 6 PID: 1 Comm: swapper/0 Not tainted
5.11.0-rc6-guest-upstream+ #26
[ 0.874920] Hardware name: QEMU KVM Virtual Machine, BIOS 0.0.0
02/06/2015
[ 0.879283] pstate: 80400005 (Nzcv daif +PAN -UAO -TCO BTYPE=--)
[ 0.883055] pc : ioremap_page_range+0x33c/0x3e0
[ 0.885942] lr : ioremap_page_range+0x30/0x3e0
[ 0.888737] sp : ffff80001272f800
[ 0.890824] x29: ffff80001272f800 x28: ffffffbffe801000
[ 0.894168] x27: ffffffc020040000 x26: ffff8000111b01f8
[ 0.897543] x25: 0400000000000001 x24: ffffffbffe800000
[ 0.900882] x23: 000000003eff3000 x22: ffffffbffe801000
[ 0.904221] x21: ffffffbffe801000 x20: ffff0003f2270020
[ 0.907612] x19: 0000000000000001 x18: 0000000000000030
[ 0.910952] x17: 0000000000000000 x16: 0000000000000001
[ 0.914283] x15: ffffffffffffffff x14: ffff8000116d49c8
[ 0.917679] x13: 000000003eff3000 x12: 0000000000000041
[ 0.921018] x11: ffff800011f2f000 x10: 000000000000002e
[ 0.924359] x9 : ffff800010c372c4 x8 : ffffffbffe800000
[ 0.927744] x7 : ffff0003f224eff8 x6 : 0000000000000001
[ 0.931092] x5 : ffffffbffe800fff x4 : ffff8000116de650
[ 0.934430] x3 : 0068000000000f17 x2 : 0140000000000000
[ 0.937813] x1 : 00000040407f0000 x0 : ffff0003ffdcccc0
[ 0.941165] Call trace:
[ 0.942713] ioremap_page_range+0x33c/0x3e0
[ 0.945374] pci_remap_iospace+0x7c/0x90
[ 0.947881] acpi_pci_probe_root_resources+0x180/0x238
[ 0.951122] pci_acpi_root_prepare_resources+0x28/0xc8
[ 0.954357] acpi_pci_root_create+0x9c/0x2f8
[ 0.956990] pci_acpi_scan_root+0x150/0x240
[ 0.959639] acpi_pci_root_add+0x34c/0x4e0
[ 0.962220] acpi_bus_attach+0x15c/0x2c0
[ 0.964692] acpi_bus_attach+0x9c/0x2c0
[ 0.967135] acpi_bus_attach+0x9c/0x2c0
[ 0.969582] acpi_bus_scan+0x64/0x118
[ 0.971888] acpi_scan_init+0x10c/0x244
[ 0.974302] acpi_init+0x2bc/0x328
[ 0.976463] do_one_initcall+0x54/0x268
[ 0.978913] kernel_init_freeable+0x22c/0x2c4
[ 0.981658] kernel_init+0x1c/0x128
[ 0.983864] ret_from_fork+0x10/0x34
[ 0.986139] Code: a9446bf9 a8cb7bfd d50323bf d65f03c0 (d4210000)
[ 0.990037] ---[ end trace fc68f309d1db57e3 ]---
[ 0.992939] Kernel panic - not syncing: Oops - BUG: Fatal exception
[ 0.996893] SMP: stopping secondary CPUs
[ 0.999487] ---[ end Kernel panic - not syncing: Oops - BUG: Fatal
exception ]---
Do you have any idea. I am using
http://snapshots.linaro.org/components/kernel/leg-virt-tianocore-edk2-upstream/4198/QEMU-AARCH64/RELEASE_GCC5/
Thanks
Eric
>
> Thanks,
> Xingang
> .
>