[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: Emulate Rpi with QEMU fails
From: |
Paul Zimmerman |
Subject: |
Re: Emulate Rpi with QEMU fails |
Date: |
Thu, 8 Oct 2020 14:07:27 -0700 |
Hi Thomas,
What does 'top' say while the emulation is running? I have an 8 cpu-thread
system, yet 'top' never shows more than about 300% cpu. I would have
thought it would get closer to 800% cpu. And running qemu as root with
nice -20 doesn't seem to make much difference.
- Paul
On Thu, Oct 8, 2020 at 12:00 AM Thomas <74cmonty@gmail.com> wrote:
>
> Interesting enough is: my top figure reported by perf is like yours:
>
> Samples: 6M of event 'cycles:u', Event count (approx.): 1936571734942
> Overhead Command Shared Object Symbol
> 7,95% qemu-system-arm qemu-system-arm [.]
> helper_lookup_tb_ptr
> ◆
> 4,16% qemu-system-arm qemu-system-arm [.]
> cpu_get_tb_cpu_state
> ▒
> 2,52% qemu-system-arm libpthread-2.32.so [.]
> __pthread_mutex_lock
> ▒
> 2,06% qemu-system-arm qemu-system-arm [.]
> qht_lookup_custom
> ▒
> 1,66% qemu-system-arm qemu-system-arm [.]
> tlb_set_page_with_attrs
> ▒
> 1,61% qemu-system-arm libpthread-2.32.so [.]
> __pthread_mutex_unlock_usercnt
> ▒
> 1,59% qemu-system-arm qemu-system-arm [.]
> get_phys_addr
> ▒
> 1,27% qemu-system-arm qemu-system-arm [.]
> cpu_exec
> ▒
> 1,23% qemu-system-arm qemu-system-arm [.]
> object_class_dynamic_cast_assert
> ▒
> 0,98% qemu-system-arm libc-2.32.so [.]
> _int_malloc
> ▒
> 0,95% qemu-system-arm qemu-system-arm [.]
> object_dynamic_cast_assert
> ▒
> 0,95% qemu-system-arm qemu-system-arm [.]
> tb_htable_lookup
> ▒
> 0,92% qemu-system-arm qemu-system-arm [.]
> tcg_gen_code
> ▒
> 0,91% qemu-system-arm qemu-system-arm [.]
> qemu_mutex_lock_impl
> ▒
> 0,75% qemu-system-arm qemu-system-arm [.]
> get_page_addr_code_hostp
> ▒
> 0,73% qemu-system-arm qemu-system-arm [.]
> tcg_optimize
> ▒
> 0,71% qemu-system-arm qemu-system-arm [.]
> qemu_mutex_unlock_impl
> ▒
> 0,69% qemu-system-arm libc-2.32.so [.]
> _int_free
> ▒
> 0,64% qemu-system-arm qemu-system-arm [.]
> tb_flush_jmp_cache
> ▒
> 0,63% qemu-system-arm qemu-system-arm [.]
> address_space_ldl_le
> ▒
> 0,62% qemu-system-arm libpthread-2.32.so [.]
> __lll_lock_wait
> ▒
> 0,58% qemu-system-arm libpthread-2.32.so [.]
> pthread_cond_wait@@GLIBC_2.3.2
> ▒
> 0,52% qemu-system-arm qemu-system-arm [.]
> cpu_reset_interrupt
> ▒
> 0,52% qemu-system-arm libc-2.32.so [.]
> cfree@GLIBC_2.2.5
> ▒
> 0,52% qemu-system-arm qemu-system-arm [.]
> qemu_set_irq
> ▒
>
> However the absolute time is 3-4 minutes.
> And I don't know where I should start optimization now.
>
>
>
> Am 07.10.20 um 14:02 schrieb Alex Bennée:
> > Thomas Schneider <74cmonty@gmail.com> writes:
> >
> >> Are you referring to this tool?
> >> https://github.com/stefano-garzarella/qemu-boot-time
> >> <https://github.com/stefano-garzarella/qemu-boot-time>
> > No - just plain perf:
> >
> > perf record $QEMU $ARGS
> >
> > Then a "perf report" which will show you the hotspots, for example:
> >
> > 8.92% qemu-system-aar qemu-system-aarch64 [.] helper_lookup_tb_ptr
> > 4.76% qemu-system-aar qemu-system-aarch64 [.] liveness_pass_1
> > 3.69% qemu-system-aar qemu-system-aarch64 [.] tcg_gen_code
> > 2.95% qemu-system-aar qemu-system-aarch64 [.] qht_lookup_custom
> > 2.93% qemu-system-aar qemu-system-aarch64 [.] tcg_optimize
> > 1.28% qemu-system-aar qemu-system-aarch64 [.] tcg_out_opc.isra.15
> > 1.09% qemu-system-aar qemu-system-aarch64 [.] get_phys_addr_lpae
> > 1.09% qemu-system-aar [kernel.kallsyms] [k]
> > isolate_freepages_block
> > 1.05% qemu-system-aar qemu-system-aarch64 [.] cpu_get_tb_cpu_state
> > 0.98% qemu-system-aar [kernel.kallsyms] [k] do_syscall_64
> > 0.94% qemu-system-aar qemu-system-aarch64 [.] tb_lookup_cmp
> > 0.78% qemu-system-aar qemu-system-aarch64 [.] init_ts_info
> > 0.73% qemu-system-aar qemu-system-aarch64 [.] tb_htable_lookup
> > 0.73% qemu-system-aar qemu-system-aarch64 [.] tb_gen_code
> > 0.73% qemu-system-aar qemu-system-aarch64 [.]
> > tlb_set_page_with_attrs
> >
> >>
> >> Am 07.10.2020 um 13:00 schrieb Alex Bennée:
> >>> perf to record your boot
> >
>
- Re: Emulate Rpi with QEMU fails, (continued)
- Re: Emulate Rpi with QEMU fails, Thomas Schneider, 2020/10/06
- Re: Emulate Rpi with QEMU fails, Paul Zimmerman, 2020/10/06
- Re: Emulate Rpi with QEMU fails, Alex Bennée, 2020/10/06
- Re: Emulate Rpi with QEMU fails, Thomas, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Paul Zimmerman, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Thomas Schneider, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Alex Bennée, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Thomas Schneider, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Alex Bennée, 2020/10/07
- Re: Emulate Rpi with QEMU fails, Thomas, 2020/10/08
- Re: Emulate Rpi with QEMU fails,
Paul Zimmerman <=
- Re: Emulate Rpi with QEMU fails, Paul Zimmerman, 2020/10/08
- Re: Emulate Rpi with QEMU fails, Alex Bennée, 2020/10/09