[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH 10/14] hw/misc/bcm2835_cprman: implement clock mux behaviour
From: |
Philippe Mathieu-Daudé |
Subject: |
Re: [PATCH 10/14] hw/misc/bcm2835_cprman: implement clock mux behaviour |
Date: |
Fri, 2 Oct 2020 16:51:21 +0200 |
User-agent: |
Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.11.0 |
On 9/26/20 11:40 PM, Philippe Mathieu-Daudé wrote:
> On 9/25/20 12:17 PM, Luc Michel wrote:
>> A clock mux can be configured to select one of its 10 sources through
>> the cm_ctl register. It also embeds yet another clock divider, composed
>> of an integer part and a fractionnal part. The number of bits of each
>
> Typo "fractional".
>
>> part is mux dependant.
>
> Typo "dependent"?
>
>>
>> Signed-off-by: Luc Michel <luc@lmichel.fr>
>> ---
>> hw/misc/bcm2835_cprman.c | 43 +++++++++++++++++++++++++++++++++++++++-
>> 1 file changed, 42 insertions(+), 1 deletion(-)
>>
>> diff --git a/hw/misc/bcm2835_cprman.c b/hw/misc/bcm2835_cprman.c
>> index 8df2db0fd9..75bc11939b 100644
>> --- a/hw/misc/bcm2835_cprman.c
>> +++ b/hw/misc/bcm2835_cprman.c
>> @@ -229,19 +229,60 @@ static const TypeInfo cprman_pll_channel_info = {
>> };
>>
>>
>> /* clock mux */
>>
>> +static bool clock_mux_is_enabled(CprmanClockMuxState *mux)
>> +{
>> + return FIELD_EX32(*mux->reg_cm, CM_CLOCKx_CTL, ENABLE);
>> +}
>> +
>> static void clock_mux_update(CprmanClockMuxState *mux)
>> {
>> - clock_update(mux->out, 0);
>> + uint64_t freq, div;
>> + uint32_t src = FIELD_EX32(*mux->reg_cm, CM_CLOCKx_CTL, SRC);
>> + bool enabled = clock_mux_is_enabled(mux);
>> +
>> + *mux->reg_cm = FIELD_DP32(*mux->reg_cm, CM_CLOCKx_CTL, BUSY, enabled);
>> +
>> + if (!enabled) {
>> + clock_update(mux->out, 0);
>> + return;
>> + }
>> +
>> + freq = clock_get_hz(mux->srcs[src]);
>> +
>> + if (mux->int_bits == 0 && mux->frac_bits == 0) {
>> + clock_update_hz(mux->out, freq);
>> + return;
>> + }
>> +
>> + /*
>> + * The divider has an integer and a fractional part. The size of each
>> part
>> + * varies with the muxes (int_bits and frac_bits). Both parts are
>> + * concatenated, with the integer part always starting at bit 12.
>> + */
>> + div = mux->reg_cm[1] >> (R_CM_CLOCKx_DIV_FRAC_LENGTH - mux->frac_bits);
>> + div &= (1 << (mux->int_bits + mux->frac_bits)) - 1;
Eventually:
div &= MAKE_64BIT_MASK(mux->int_bits + mux->frac_bits, 64);
>> +
>> + freq = (freq << mux->frac_bits) / div;
Maybe:
freq = muldiv64(freq, 1 << mux->frac_bits, div);
>> +
>> + clock_update_hz(mux->out, freq);
>> }
>>
>> static void clock_mux_src_update(void *opaque)
>> {
>> CprmanClockMuxState **backref = opaque;
>> CprmanClockMuxState *s = *backref;
>> + CprmanClockMuxSource src = backref - s->backref;
>> + uint32_t current_src;
Maybe avoid current_src and use in place.
Otherwise:
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
>> +
>> + current_src = FIELD_EX32(*s->reg_cm, CM_CLOCKx_CTL, SRC);
>> +
>> + if (current_src != src) {
>> + return;
>> + }
>>
>> clock_mux_update(s);
>> }
>>
>> static void clock_mux_init(Object *obj)
>>
>
- Re: [PATCH 10/14] hw/misc/bcm2835_cprman: implement clock mux behaviour,
Philippe Mathieu-Daudé <=