[PATCH] hw/arm/aspeed: Add board model for Supermicro X11 BMC

[erik-smit]

Signed-off-by: erik-smit <erik.lucas.smit@gmail.com>
-- 
checkpatch was complaining about the length of
aspeed_machine_supermicrox11_bmc_class_init(ObjectClass *oc, void *data)

so I renamed it to aspeed_machine_smx11_bmc_class_init. Not sure if
that's the right way to go, since then it's out of sync with the machine
name "supermicrox11-bmc". But renaming the machine name to "smx11-bmc"
makes it less descriptive...

---
 hw/arm/aspeed.c | 34 ++++++++++++++++++++++++++++++++++
 1 file changed, 34 insertions(+)

diff --git a/hw/arm/aspeed.c b/hw/arm/aspeed.c
index 379f9672a5..e74a89f427 100644
--- a/hw/arm/aspeed.c
+++ b/hw/arm/aspeed.c
@@ -57,6 +57,20 @@ struct AspeedMachineState {
         SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
         SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
 
+/* TODO: Find the actual hardware value */
+#define SUPERMICROX11_BMC_HW_STRAP1 (                                   \
+        SCU_AST2400_HW_STRAP_DRAM_SIZE(DRAM_SIZE_128MB) |               \
+        SCU_AST2400_HW_STRAP_DRAM_CONFIG(2) |                           \
+        SCU_AST2400_HW_STRAP_ACPI_DIS |                                 \
+        SCU_AST2400_HW_STRAP_SET_CLK_SOURCE(AST2400_CLK_48M_IN) |       \
+        SCU_HW_STRAP_VGA_CLASS_CODE |                                   \
+        SCU_HW_STRAP_LPC_RESET_PIN |                                    \
+        SCU_HW_STRAP_SPI_MODE(SCU_HW_STRAP_SPI_M_S_EN) |                \
+        SCU_AST2400_HW_STRAP_SET_CPU_AHB_RATIO(AST2400_CPU_AHB_RATIO_2_1) | \
+        SCU_HW_STRAP_SPI_WIDTH |                                        \
+        SCU_HW_STRAP_VGA_SIZE_SET(VGA_16M_DRAM) |                       \
+        SCU_AST2400_HW_STRAP_BOOT_MODE(AST2400_SPI_BOOT))
+
 /* AST2500 evb hardware value: 0xF100C2E6 */
 #define AST2500_EVB_HW_STRAP1 ((                                        \
         AST2500_HW_STRAP1_DEFAULTS |                                    \
@@ -600,6 +614,22 @@ static void aspeed_machine_palmetto_class_init(ObjectClass 
*oc, void *data)
         aspeed_soc_num_cpus(amc->soc_name);
 };
 
+static void aspeed_machine_smx11_bmc_class_init(ObjectClass *oc, void *data)
+{
+    MachineClass *mc = MACHINE_CLASS(oc);
+    AspeedMachineClass *amc = ASPEED_MACHINE_CLASS(oc);
+
+    mc->desc       = "Supermicro X11 BMC (ARM926EJ-S)";
+    amc->soc_name  = "ast2400-a1";
+    amc->hw_strap1 = SUPERMICROX11_BMC_HW_STRAP1;
+    amc->fmc_model = "mx25l25635e";
+    amc->spi_model = "mx25l25635e";
+    amc->num_cs    = 1;
+    amc->macs_mask = ASPEED_MAC0_ON | ASPEED_MAC1_ON;
+    amc->i2c_init  = palmetto_bmc_i2c_init;
+    mc->default_ram_size = 256 * MiB;
+}
+
 static void aspeed_machine_ast2500_evb_class_init(ObjectClass *oc, void *data)
 {
     MachineClass *mc = MACHINE_CLASS(oc);
@@ -728,6 +758,10 @@ static const TypeInfo aspeed_machine_types[] = {
         .name          = MACHINE_TYPE_NAME("palmetto-bmc"),
         .parent        = TYPE_ASPEED_MACHINE,
         .class_init    = aspeed_machine_palmetto_class_init,
+    }, {
+        .name          = MACHINE_TYPE_NAME("supermicrox11-bmc"),
+        .parent        = TYPE_ASPEED_MACHINE,
+        .class_init    = aspeed_machine_smx11_bmc_class_init,
     }, {
         .name          = MACHINE_TYPE_NAME("ast2500-evb"),
         .parent        = TYPE_ASPEED_MACHINE,
-- 
2.25.1