Re: [PATCH 1/2] hw/arm/palm.c: Detabify

[Li Qiang]

Peter Maydell <peter.maydell@linaro.org> 于2020年6月29日周一 上午5:45写道：
>
> Remove hard-tabs from palm.c.
>
> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

Reviewed-by: Li Qiang <liq3ea@gmail.com>

> ---
>  hw/arm/palm.c | 64 +++++++++++++++++++++++++--------------------------
>  1 file changed, 32 insertions(+), 32 deletions(-)
>
> diff --git a/hw/arm/palm.c b/hw/arm/palm.c
> index 97ca105d297..569836178f6 100644
> --- a/hw/arm/palm.c
> +++ b/hw/arm/palm.c
> @@ -61,21 +61,21 @@ static const MemoryRegionOps static_ops = {
>  /* Palm Tunsgten|E support */
>
>  /* Shared GPIOs */
> -#define PALMTE_USBDETECT_GPIO  0
> -#define PALMTE_USB_OR_DC_GPIO  1
> -#define PALMTE_TSC_GPIO                4
> -#define PALMTE_PINTDAV_GPIO    6
> -#define PALMTE_MMC_WP_GPIO     8
> -#define PALMTE_MMC_POWER_GPIO  9
> -#define PALMTE_HDQ_GPIO                11
> -#define PALMTE_HEADPHONES_GPIO 14
> -#define PALMTE_SPEAKER_GPIO    15
> +#define PALMTE_USBDETECT_GPIO   0
> +#define PALMTE_USB_OR_DC_GPIO   1
> +#define PALMTE_TSC_GPIO                 4
> +#define PALMTE_PINTDAV_GPIO     6
> +#define PALMTE_MMC_WP_GPIO      8
> +#define PALMTE_MMC_POWER_GPIO   9
> +#define PALMTE_HDQ_GPIO                 11
> +#define PALMTE_HEADPHONES_GPIO  14
> +#define PALMTE_SPEAKER_GPIO     15
>  /* MPU private GPIOs */
> -#define PALMTE_DC_GPIO         2
> -#define PALMTE_MMC_SWITCH_GPIO 4
> -#define PALMTE_MMC1_GPIO       6
> -#define PALMTE_MMC2_GPIO       7
> -#define PALMTE_MMC3_GPIO       11
> +#define PALMTE_DC_GPIO          2
> +#define PALMTE_MMC_SWITCH_GPIO  4
> +#define PALMTE_MMC1_GPIO        6
> +#define PALMTE_MMC2_GPIO        7
> +#define PALMTE_MMC3_GPIO        11
>
>  static MouseTransformInfo palmte_pointercal = {
>      .x = 320,
> @@ -100,17 +100,17 @@ static struct {
>      int column;
>  } palmte_keymap[0x80] = {
>      [0 ... 0x7f] = { -1, -1 },
> -    [0x3b] = { 0, 0 }, /* F1   -> Calendar */
> -    [0x3c] = { 1, 0 }, /* F2   -> Contacts */
> -    [0x3d] = { 2, 0 }, /* F3   -> Tasks List */
> -    [0x3e] = { 3, 0 }, /* F4   -> Note Pad */
> -    [0x01] = { 4, 0 }, /* Esc  -> Power */
> -    [0x4b] = { 0, 1 }, /*         Left */
> -    [0x50] = { 1, 1 }, /*         Down */
> -    [0x48] = { 2, 1 }, /*         Up */
> -    [0x4d] = { 3, 1 }, /*         Right */
> -    [0x4c] = { 4, 1 }, /*         Centre */
> -    [0x39] = { 4, 1 }, /* Spc  -> Centre */
> +    [0x3b] = { 0, 0 },  /* F1   -> Calendar */
> +    [0x3c] = { 1, 0 },  /* F2   -> Contacts */
> +    [0x3d] = { 2, 0 },  /* F3   -> Tasks List */
> +    [0x3e] = { 3, 0 },  /* F4   -> Note Pad */
> +    [0x01] = { 4, 0 },  /* Esc  -> Power */
> +    [0x4b] = { 0, 1 },  /*         Left */
> +    [0x50] = { 1, 1 },  /*         Down */
> +    [0x48] = { 2, 1 },  /*         Up */
> +    [0x4d] = { 3, 1 },  /*         Right */
> +    [0x4c] = { 4, 1 },  /*         Centre */
> +    [0x39] = { 4, 1 },  /* Spc  -> Centre */
>  };
>
>  static void palmte_button_event(void *opaque, int keycode)
> @@ -161,13 +161,13 @@ static void palmte_gpio_setup(struct omap_mpu_state_s 
> *cpu)
>                              [PALMTE_MMC_SWITCH_GPIO]));
>
>      misc_gpio = qemu_allocate_irqs(palmte_onoff_gpios, cpu, 7);
> -    qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO,    misc_gpio[0]);
> -    qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO,      misc_gpio[1]);
> -    qdev_connect_gpio_out(cpu->gpio, 11,                       misc_gpio[2]);
> -    qdev_connect_gpio_out(cpu->gpio, 12,                       misc_gpio[3]);
> -    qdev_connect_gpio_out(cpu->gpio, 13,                       misc_gpio[4]);
> -    omap_mpuio_out_set(cpu->mpuio, 1,                          misc_gpio[5]);
> -    omap_mpuio_out_set(cpu->mpuio, 3,                          misc_gpio[6]);
> +    qdev_connect_gpio_out(cpu->gpio, PALMTE_MMC_POWER_GPIO,     
> misc_gpio[0]);
> +    qdev_connect_gpio_out(cpu->gpio, PALMTE_SPEAKER_GPIO,       
> misc_gpio[1]);
> +    qdev_connect_gpio_out(cpu->gpio, 11,                        
> misc_gpio[2]);
> +    qdev_connect_gpio_out(cpu->gpio, 12,                        
> misc_gpio[3]);
> +    qdev_connect_gpio_out(cpu->gpio, 13,                        
> misc_gpio[4]);
> +    omap_mpuio_out_set(cpu->mpuio, 1,                           
> misc_gpio[5]);
> +    omap_mpuio_out_set(cpu->mpuio, 3,                           
> misc_gpio[6]);
>
>      /* Reset some inputs to initial state.  */
>      qemu_irq_lower(qdev_get_gpio_in(cpu->gpio, PALMTE_USBDETECT_GPIO));
> --
> 2.20.1
>
>