[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v7 1/4] hw/net/can: Introduce Xilinx ZynqMP CAN controller
|
From: |
Edgar E. Iglesias |
|
Subject: |
Re: [PATCH v7 1/4] hw/net/can: Introduce Xilinx ZynqMP CAN controller |
|
Date: |
Thu, 9 Jul 2020 00:56:55 +0200 |
|
User-agent: |
Mutt/1.10.1 (2018-07-13) |
On Wed, Jul 08, 2020 at 09:23:54PM +0000, Vikram Garhwal wrote:
> Hi Edgar,
> Thanks for reviewing the patch. Please see some comments.
>
> > -----Original Message-----
> > From: Edgar E. Iglesias <edgar.iglesias@gmail.com>
> > Sent: Tuesday, July 7, 2020 5:49 AM
> > To: Vikram Garhwal <fnuv@xilinx.com>
> > Cc: qemu-devel@nongnu.org; Francisco Eduardo Iglesias
> > <figlesia@xilinx.com>; Jason Wang <jasowang@redhat.com>; Alistair
> > Francis <alistair@alistair23.me>; Peter Maydell
> > <peter.maydell@linaro.org>; open list:Xilinx ZynqMP <qemu-
> > arm@nongnu.org>
> > Subject: Re: [PATCH v7 1/4] hw/net/can: Introduce Xilinx ZynqMP CAN
> > controller
> >
> > On Thu, Jun 25, 2020 at 12:33:24PM -0700, Vikram Garhwal wrote:
> > > The Xilinx ZynqMP CAN controller is developed based on SocketCAN,
> > QEMU CAN bus
> > > implementation. Bus connection and socketCAN connection for each CAN
> > module
> > > can be set through command lines.
> > >
> > > Example for using single CAN:
> > > -object can-bus,id=canbus0 \
> > > -global driver=xlnx.zynqmp-can,property=canbus0,value=canbus0 \
> > > -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0
> > >
> > > Example for connecting both CAN to same virtual CAN on host machine:
> > > -object can-bus,id=canbus0 -object can-bus,id=canbus1 \
> > > -global driver=xlnx.zynqmp-can,property=canbus0,value=canbus0 \
> > > -global driver=xlnx.zynqmp-can,property=canbus1,value=canbus1 \
> > > -object can-host-socketcan,id=socketcan0,if=vcan0,canbus=canbus0 \
> > > -object can-host-socketcan,id=socketcan1,if=vcan0,canbus=canbus1
> > >
> > > To create virtual CAN on the host machine, please check the QEMU CAN
> > docs:
> > > https://github.com/qemu/qemu/blob/master/docs/can.txt
> >
> >
> > Hi Vikram,
> >
> > Just a few more comments/questions.
> >
> >
> >
> > >
> > > Signed-off-by: Vikram Garhwal <fnu.vikram@xilinx.com>
> > > ---
> > > hw/net/can/Makefile.objs | 1 +
> > > hw/net/can/xlnx-zynqmp-can.c | 1163
> > ++++++++++++++++++++++++++++++++++++++
> > > include/hw/net/xlnx-zynqmp-can.h | 79 +++
> > > 3 files changed, 1243 insertions(+)
> > > create mode 100644 hw/net/can/xlnx-zynqmp-can.c
> > > create mode 100644 include/hw/net/xlnx-zynqmp-can.h
> > >
> > > diff --git a/hw/net/can/Makefile.objs b/hw/net/can/Makefile.objs
> > > index 9f0c4ee..0fe87dd 100644
> > > --- a/hw/net/can/Makefile.objs
> > > +++ b/hw/net/can/Makefile.objs
> > > @@ -2,3 +2,4 @@ common-obj-$(CONFIG_CAN_SJA1000) +=
> > can_sja1000.o
> > > common-obj-$(CONFIG_CAN_PCI) += can_kvaser_pci.o
> > > common-obj-$(CONFIG_CAN_PCI) += can_pcm3680_pci.o
> > > common-obj-$(CONFIG_CAN_PCI) += can_mioe3680_pci.o
> > > +common-obj-$(CONFIG_XLNX_ZYNQMP) += xlnx-zynqmp-can.o
> > > diff --git a/hw/net/can/xlnx-zynqmp-can.c b/hw/net/can/xlnx-zynqmp-
> > can.c
> > > new file mode 100644
> > > index 0000000..a71137f
> > > --- /dev/null
> > > +++ b/hw/net/can/xlnx-zynqmp-can.c
> > > @@ -0,0 +1,1163 @@
> > > +/*
> > > + * QEMU model of the Xilinx ZynqMP CAN controller.
> > > + * This implementation is based on the following datasheet:
> > > + *
> > https://www.xilinx.com/support/documentation/user_guides/ug1085-
> > zynq-ultrascale-trm.pdf
> > > + *
> > > + * Copyright (c) 2020 Xilinx Inc.
> > > + *
> > > + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
> > > + *
> > > + * Based on QEMU CAN Device emulation implemented by Jin Yang,
> > Deniz Eren and
> > > + * Pavel Pisa
> > > + *
> > > + * Permission is hereby granted, free of charge, to any person obtaining
> > a copy
> > > + * of this software and associated documentation files (the "Software"),
> > to deal
> > > + * in the Software without restriction, including without limitation the
> > rights
> > > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > > + * copies of the Software, and to permit persons to whom the Software
> > is
> > > + * furnished to do so, subject to the following conditions:
> > > + *
> > > + * The above copyright notice and this permission notice shall be
> > included in
> > > + * all copies or substantial portions of the Software.
> > > + *
> > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
> > KIND, EXPRESS OR
> > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > MERCHANTABILITY,
> > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> > EVENT SHALL
> > > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > DAMAGES OR OTHER
> > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
> > OTHERWISE, ARISING FROM,
> > > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > OTHER DEALINGS IN
> > > + * THE SOFTWARE.
> > > + */
> > > +
> > > +#include "qemu/osdep.h"
> > > +#include "hw/sysbus.h"
> > > +#include "hw/register.h"
> > > +#include "hw/irq.h"
> > > +#include "qapi/error.h"
> > > +#include "qemu/bitops.h"
> > > +#include "qemu/log.h"
> > > +#include "qemu/cutils.h"
> > > +#include "sysemu/sysemu.h"
> > > +#include "migration/vmstate.h"
> > > +#include "hw/qdev-properties.h"
> > > +#include "net/can_emu.h"
> > > +#include "net/can_host.h"
> > > +#include "qemu/event_notifier.h"
> > > +#include "qom/object_interfaces.h"
> > > +#include "hw/net/xlnx-zynqmp-can.h"
> > > +
> > > +#ifndef XLNX_ZYNQMP_CAN_ERR_DEBUG
> > > +#define XLNX_ZYNQMP_CAN_ERR_DEBUG 0
> > > +#endif
> > > +
> > > +#define DB_PRINT(...) do { \
> > > + if (XLNX_ZYNQMP_CAN_ERR_DEBUG) { \
> > > + qemu_log(__VA_ARGS__); \
> > > + } \
> > > +} while (0)
> > > +
> > > +#define MAX_DLC 8
> > > +#undef ERROR
> > > +
> > > +REG32(SOFTWARE_RESET_REGISTER, 0x0)
> > > + FIELD(SOFTWARE_RESET_REGISTER, CEN, 1, 1)
> > > + FIELD(SOFTWARE_RESET_REGISTER, SRST, 0, 1)
> > > +REG32(MODE_SELECT_REGISTER, 0x4)
> > > + FIELD(MODE_SELECT_REGISTER, SNOOP, 2, 1)
> > > + FIELD(MODE_SELECT_REGISTER, LBACK, 1, 1)
> > > + FIELD(MODE_SELECT_REGISTER, SLEEP, 0, 1)
> > > +REG32(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, 0x8)
> > > + FIELD(ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER, BRP,
> > 0, 8)
> > > +REG32(ARBITRATION_PHASE_BIT_TIMING_REGISTER, 0xc)
> > > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, SJW, 7, 2)
> > > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS2, 4, 3)
> > > + FIELD(ARBITRATION_PHASE_BIT_TIMING_REGISTER, TS1, 0, 4)
> > > +REG32(ERROR_COUNTER_REGISTER, 0x10)
> > > + FIELD(ERROR_COUNTER_REGISTER, REC, 8, 8)
> > > + FIELD(ERROR_COUNTER_REGISTER, TEC, 0, 8)
> > > +REG32(ERROR_STATUS_REGISTER, 0x14)
> > > + FIELD(ERROR_STATUS_REGISTER, ACKER, 4, 1)
> > > + FIELD(ERROR_STATUS_REGISTER, BERR, 3, 1)
> > > + FIELD(ERROR_STATUS_REGISTER, STER, 2, 1)
> > > + FIELD(ERROR_STATUS_REGISTER, FMER, 1, 1)
> > > + FIELD(ERROR_STATUS_REGISTER, CRCER, 0, 1)
> > > +REG32(STATUS_REGISTER, 0x18)
> > > + FIELD(STATUS_REGISTER, SNOOP, 12, 1)
> > > + FIELD(STATUS_REGISTER, ACFBSY, 11, 1)
> > > + FIELD(STATUS_REGISTER, TXFLL, 10, 1)
> > > + FIELD(STATUS_REGISTER, TXBFLL, 9, 1)
> > > + FIELD(STATUS_REGISTER, ESTAT, 7, 2)
> > > + FIELD(STATUS_REGISTER, ERRWRN, 6, 1)
> > > + FIELD(STATUS_REGISTER, BBSY, 5, 1)
> > > + FIELD(STATUS_REGISTER, BIDLE, 4, 1)
> > > + FIELD(STATUS_REGISTER, NORMAL, 3, 1)
> > > + FIELD(STATUS_REGISTER, SLEEP, 2, 1)
> > > + FIELD(STATUS_REGISTER, LBACK, 1, 1)
> > > + FIELD(STATUS_REGISTER, CONFIG, 0, 1)
> > > +REG32(INTERRUPT_STATUS_REGISTER, 0x1c)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, TXFEMP, 14, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, TXFWMEMP, 13, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, RXFWMFLL, 12, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, WKUP, 11, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, SLP, 10, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, BSOFF, 9, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, ERROR, 8, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, RXNEMP, 7, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, RXOFLW, 6, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, RXUFLW, 5, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, RXOK, 4, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, TXBFLL, 3, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, TXFLL, 2, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, TXOK, 1, 1)
> > > + FIELD(INTERRUPT_STATUS_REGISTER, ARBLST, 0, 1)
> > > +REG32(INTERRUPT_ENABLE_REGISTER, 0x20)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFEMP, 14, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFWMEMP, 13, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXFWMFLL, 12, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, EWKUP, 11, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ESLP, 10, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, EBSOFF, 9, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, EERROR, 8, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXNEMP, 7, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOFLW, 6, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXUFLW, 5, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ERXOK, 4, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXBFLL, 3, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXFLL, 2, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, ETXOK, 1, 1)
> > > + FIELD(INTERRUPT_ENABLE_REGISTER, EARBLST, 0, 1)
> > > +REG32(INTERRUPT_CLEAR_REGISTER, 0x24)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFEMP, 14, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFWMEMP, 13, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXFWMFLL, 12, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CWKUP, 11, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CSLP, 10, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CBSOFF, 9, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CERROR, 8, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXNEMP, 7, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOFLW, 6, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXUFLW, 5, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CRXOK, 4, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXBFLL, 3, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXFLL, 2, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CTXOK, 1, 1)
> > > + FIELD(INTERRUPT_CLEAR_REGISTER, CARBLST, 0, 1)
> > > +REG32(TIMESTAMP_REGISTER, 0x28)
> > > + FIELD(TIMESTAMP_REGISTER, CTS, 0, 1)
> > > +REG32(WIR, 0x2c)
> > > + FIELD(WIR, EW, 8, 8)
> > > + FIELD(WIR, FW, 0, 8)
> > > +REG32(TXFIFO_ID, 0x30)
> > > + FIELD(TXFIFO_ID, IDH, 21, 11)
> > > + FIELD(TXFIFO_ID, SRRRTR, 20, 1)
> > > + FIELD(TXFIFO_ID, IDE, 19, 1)
> > > + FIELD(TXFIFO_ID, IDL, 1, 18)
> > > + FIELD(TXFIFO_ID, RTR, 0, 1)
> > > +REG32(TXFIFO_DLC, 0x34)
> > > + FIELD(TXFIFO_DLC, DLC, 28, 4)
> > > +REG32(TXFIFO_DATA1, 0x38)
> > > + FIELD(TXFIFO_DATA1, DB0, 24, 8)
> > > + FIELD(TXFIFO_DATA1, DB1, 16, 8)
> > > + FIELD(TXFIFO_DATA1, DB2, 8, 8)
> > > + FIELD(TXFIFO_DATA1, DB3, 0, 8)
> > > +REG32(TXFIFO_DATA2, 0x3c)
> > > + FIELD(TXFIFO_DATA2, DB4, 24, 8)
> > > + FIELD(TXFIFO_DATA2, DB5, 16, 8)
> > > + FIELD(TXFIFO_DATA2, DB6, 8, 8)
> > > + FIELD(TXFIFO_DATA2, DB7, 0, 8)
> > > +REG32(TXHPB_ID, 0x40)
> > > + FIELD(TXHPB_ID, IDH, 21, 11)
> > > + FIELD(TXHPB_ID, SRRRTR, 20, 1)
> > > + FIELD(TXHPB_ID, IDE, 19, 1)
> > > + FIELD(TXHPB_ID, IDL, 1, 18)
> > > + FIELD(TXHPB_ID, RTR, 0, 1)
> > > +REG32(TXHPB_DLC, 0x44)
> > > + FIELD(TXHPB_DLC, DLC, 28, 4)
> > > +REG32(TXHPB_DATA1, 0x48)
> > > + FIELD(TXHPB_DATA1, DB0, 24, 8)
> > > + FIELD(TXHPB_DATA1, DB1, 16, 8)
> > > + FIELD(TXHPB_DATA1, DB2, 8, 8)
> > > + FIELD(TXHPB_DATA1, DB3, 0, 8)
> > > +REG32(TXHPB_DATA2, 0x4c)
> > > + FIELD(TXHPB_DATA2, DB4, 24, 8)
> > > + FIELD(TXHPB_DATA2, DB5, 16, 8)
> > > + FIELD(TXHPB_DATA2, DB6, 8, 8)
> > > + FIELD(TXHPB_DATA2, DB7, 0, 8)
> > > +REG32(RXFIFO_ID, 0x50)
> > > + FIELD(RXFIFO_ID, IDH, 21, 11)
> > > + FIELD(RXFIFO_ID, SRRRTR, 20, 1)
> > > + FIELD(RXFIFO_ID, IDE, 19, 1)
> > > + FIELD(RXFIFO_ID, IDL, 1, 18)
> > > + FIELD(RXFIFO_ID, RTR, 0, 1)
> > > +REG32(RXFIFO_DLC, 0x54)
> > > + FIELD(RXFIFO_DLC, DLC, 28, 4)
> > > + FIELD(RXFIFO_DLC, RXT, 0, 16)
> > > +REG32(RXFIFO_DATA1, 0x58)
> > > + FIELD(RXFIFO_DATA1, DB0, 24, 8)
> > > + FIELD(RXFIFO_DATA1, DB1, 16, 8)
> > > + FIELD(RXFIFO_DATA1, DB2, 8, 8)
> > > + FIELD(RXFIFO_DATA1, DB3, 0, 8)
> > > +REG32(RXFIFO_DATA2, 0x5c)
> > > + FIELD(RXFIFO_DATA2, DB4, 24, 8)
> > > + FIELD(RXFIFO_DATA2, DB5, 16, 8)
> > > + FIELD(RXFIFO_DATA2, DB6, 8, 8)
> > > + FIELD(RXFIFO_DATA2, DB7, 0, 8)
> > > +REG32(AFR, 0x60)
> > > + FIELD(AFR, UAF4, 3, 1)
> > > + FIELD(AFR, UAF3, 2, 1)
> > > + FIELD(AFR, UAF2, 1, 1)
> > > + FIELD(AFR, UAF1, 0, 1)
> > > +REG32(AFMR1, 0x64)
> > > + FIELD(AFMR1, AMIDH, 21, 11)
> > > + FIELD(AFMR1, AMSRR, 20, 1)
> > > + FIELD(AFMR1, AMIDE, 19, 1)
> > > + FIELD(AFMR1, AMIDL, 1, 18)
> > > + FIELD(AFMR1, AMRTR, 0, 1)
> > > +REG32(AFIR1, 0x68)
> > > + FIELD(AFIR1, AIIDH, 21, 11)
> > > + FIELD(AFIR1, AISRR, 20, 1)
> > > + FIELD(AFIR1, AIIDE, 19, 1)
> > > + FIELD(AFIR1, AIIDL, 1, 18)
> > > + FIELD(AFIR1, AIRTR, 0, 1)
> > > +REG32(AFMR2, 0x6c)
> > > + FIELD(AFMR2, AMIDH, 21, 11)
> > > + FIELD(AFMR2, AMSRR, 20, 1)
> > > + FIELD(AFMR2, AMIDE, 19, 1)
> > > + FIELD(AFMR2, AMIDL, 1, 18)
> > > + FIELD(AFMR2, AMRTR, 0, 1)
> > > +REG32(AFIR2, 0x70)
> > > + FIELD(AFIR2, AIIDH, 21, 11)
> > > + FIELD(AFIR2, AISRR, 20, 1)
> > > + FIELD(AFIR2, AIIDE, 19, 1)
> > > + FIELD(AFIR2, AIIDL, 1, 18)
> > > + FIELD(AFIR2, AIRTR, 0, 1)
> > > +REG32(AFMR3, 0x74)
> > > + FIELD(AFMR3, AMIDH, 21, 11)
> > > + FIELD(AFMR3, AMSRR, 20, 1)
> > > + FIELD(AFMR3, AMIDE, 19, 1)
> > > + FIELD(AFMR3, AMIDL, 1, 18)
> > > + FIELD(AFMR3, AMRTR, 0, 1)
> > > +REG32(AFIR3, 0x78)
> > > + FIELD(AFIR3, AIIDH, 21, 11)
> > > + FIELD(AFIR3, AISRR, 20, 1)
> > > + FIELD(AFIR3, AIIDE, 19, 1)
> > > + FIELD(AFIR3, AIIDL, 1, 18)
> > > + FIELD(AFIR3, AIRTR, 0, 1)
> > > +REG32(AFMR4, 0x7c)
> > > + FIELD(AFMR4, AMIDH, 21, 11)
> > > + FIELD(AFMR4, AMSRR, 20, 1)
> > > + FIELD(AFMR4, AMIDE, 19, 1)
> > > + FIELD(AFMR4, AMIDL, 1, 18)
> > > + FIELD(AFMR4, AMRTR, 0, 1)
> > > +REG32(AFIR4, 0x80)
> > > + FIELD(AFIR4, AIIDH, 21, 11)
> > > + FIELD(AFIR4, AISRR, 20, 1)
> > > + FIELD(AFIR4, AIIDE, 19, 1)
> > > + FIELD(AFIR4, AIIDL, 1, 18)
> > > + FIELD(AFIR4, AIRTR, 0, 1)
> > > +
> > > +static void can_update_irq(XlnxZynqMPCANState *s)
> > > +{
> > > + uint32_t irq;
> > > +
> > > + /* Watermark register interrupts. */
> > > + if ((fifo32_num_free(&s->tx_fifo) / CAN_FRAME_SIZE) >
> > > + ARRAY_FIELD_EX32(s->regs, WIR, EW)) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > TXFWMEMP, 1);
> > > + }
> > > +
> > > + if ((fifo32_num_used(&s->rx_fifo) / CAN_FRAME_SIZE) >
> > > + ARRAY_FIELD_EX32(s->regs, WIR, FW)) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > RXFWMFLL, 1);
> > > + }
> > > +
> > > + /* RX Interrupts. */
> > > + if (fifo32_num_used(&s->rx_fifo) >= CAN_FRAME_SIZE) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > RXNEMP, 1);
> > > + }
> > > +
> > > + /* TX interrupts. */
> > > + if (fifo32_is_empty(&s->tx_fifo)) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > TXFEMP, 1);
> > > + }
> > > +
> > > + if (fifo32_is_full(&s->tx_fifo)) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXFLL,
> > 1);
> > > + }
> > > +
> > > + if (fifo32_is_full(&s->txhpb_fifo)) {
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXBFLL,
> > 1);
> > > + }
> > > +
> > > + irq = s->regs[R_INTERRUPT_STATUS_REGISTER];
> > > + irq &= s->regs[R_INTERRUPT_ENABLE_REGISTER];
> > > +
> > > + qemu_set_irq(s->irq, irq);
> > > +}
> > > +
> > > +static void can_ier_post_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > +
> > > + can_update_irq(s);
> > > +}
> > > +
> > > +static uint64_t can_icr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + s->regs[R_INTERRUPT_STATUS_REGISTER] &= ~val;
> > > + can_update_irq(s);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void can_config_reset(XlnxZynqMPCANState *s)
> > > +{
> > > + /* Reset all the configuration registers. */
> > > + register_reset(&s->reg_info[R_SOFTWARE_RESET_REGISTER]);
> > > + register_reset(&s->reg_info[R_MODE_SELECT_REGISTER]);
> > > + register_reset(
> > > + &s-
> > >reg_info[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER]);
> > > + register_reset(&s-
> > >reg_info[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER]);
> > > + register_reset(&s->reg_info[R_STATUS_REGISTER]);
> > > + register_reset(&s->reg_info[R_INTERRUPT_STATUS_REGISTER]);
> > > + register_reset(&s->reg_info[R_INTERRUPT_ENABLE_REGISTER]);
> > > + register_reset(&s->reg_info[R_INTERRUPT_CLEAR_REGISTER]);
> > > + register_reset(&s->reg_info[R_WIR]);
> > > +}
> > > +
> > > +static void can_config_mode(XlnxZynqMPCANState *s)
> > > +{
> > > + register_reset(&s->reg_info[R_ERROR_COUNTER_REGISTER]);
> > > + register_reset(&s->reg_info[R_ERROR_STATUS_REGISTER]);
> > > +
> > > + /* Put XlnxZynqMPCAN in configuration mode. */
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 1);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP,
> > 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP, 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, BSOFF,
> > 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ERROR,
> > 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOFLW,
> > 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, RXOK, 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK, 0);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, ARBLST,
> > 0);
> > > +
> > > + can_update_irq(s);
> > > +}
> > > +
> > > +static void update_status_register_mode_bits(XlnxZynqMPCANState *s)
> > > +{
> > > + bool sleep_status = ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER,
> > SLEEP);
> > > + bool sleep_mode = ARRAY_FIELD_EX32(s->regs,
> > MODE_SELECT_REGISTER, SLEEP);
> > > + /* Wake up interrupt bit. */
> > > + bool wakeup_irq_val = sleep_status && (sleep_mode == 0);
> > > + /* Sleep interrupt bit. */
> > > + bool sleep_irq_val = sleep_mode && (sleep_status == 0);
> > > +
> > > + /* Clear previous core mode status bits. */
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 0);
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 0);
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 0);
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 0);
> > > +
> > > + /* set current mode bit and generate irqs accordingly. */
> > > + if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, LBACK)) {
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, LBACK, 1);
> > > + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER, SLEEP))
> > {
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SLEEP, 1);
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, SLP,
> > > + sleep_irq_val);
> > > + } else if (ARRAY_FIELD_EX32(s->regs, MODE_SELECT_REGISTER,
> > SNOOP)) {
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, SNOOP, 1);
> > > + } else {
> > > + /*
> > > + * If all bits are zero then XlnxZynqMPCAN is set in normal mode.
> > > + */
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, NORMAL, 1);
> > > + /* Set wakeup interrupt bit. */
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, WKUP,
> > > + wakeup_irq_val);
> > > + }
> > > +
> > > + can_update_irq(s);
> > > +}
> > > +
> > > +static void can_exit_sleep_mode(XlnxZynqMPCANState *s)
> > > +{
> > > + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP, 0);
> > > + update_status_register_mode_bits(s);
> > > +}
> > > +
> > > +static void generate_frame(qemu_can_frame *frame, uint32_t *data)
> > > +{
> > > + frame->can_id = data[0];
> > > + frame->can_dlc = FIELD_EX32(data[1], TXFIFO_DLC, DLC);
> > > +
> > > + frame->data[0] = FIELD_EX32(data[2], TXFIFO_DATA1, DB3);
> > > + frame->data[1] = FIELD_EX32(data[2], TXFIFO_DATA1, DB2);
> > > + frame->data[2] = FIELD_EX32(data[2], TXFIFO_DATA1, DB1);
> > > + frame->data[3] = FIELD_EX32(data[2], TXFIFO_DATA1, DB0);
> > > +
> > > + frame->data[4] = FIELD_EX32(data[3], TXFIFO_DATA2, DB7);
> > > + frame->data[5] = FIELD_EX32(data[3], TXFIFO_DATA2, DB6);
> > > + frame->data[6] = FIELD_EX32(data[3], TXFIFO_DATA2, DB5);
> > > + frame->data[7] = FIELD_EX32(data[3], TXFIFO_DATA2, DB4);
> > > +}
> > > +
> > > +static bool tx_ready_check(XlnxZynqMPCANState *s)
> > > +{
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to transfer"
> > > + " data while controller is in reset mode.\n",
> > > + s->cfg.ctrl_idx);
> > > + return false;
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) ==
> > 0) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to transfer"
> > > + " data while controller is in configuration mode.
> > > Reset"
> > > + " the core so operations can start fresh.\n",
> > > + s->cfg.ctrl_idx);
> > > + return false;
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to transfer"
> > > + " data while controller is in SNOOP MODE.\n",
> > > + s->cfg.ctrl_idx);
> > > + return false;
> > > + }
> > > +
> > > + return true;
> > > +}
> > > +
> > > +static void transfer_fifo(XlnxZynqMPCANState *s, Fifo32 *fifo)
> > > +{
> > > + qemu_can_frame frame;
> > > + uint32_t data[CAN_FRAME_SIZE];
> > > + int i;
> > > + bool can_tx = tx_ready_check(s);
> > > +
> > > + if (can_tx) {
> > > + while (!fifo32_is_empty(fifo)) {
> > > + for (i = 0; i < CAN_FRAME_SIZE; i++) {
> > > + data[i] = fifo32_pop(fifo);
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
> > > + /*
> > > + * Controller is in loopback. In Loopback mode, the CAN
> > > core
> > > + * transmits a recessive bitstream on to the
> > > XlnxZynqMPCAN
> > Bus.
> > > + * Any message transmitted is looped back to the RX line
> > > and
> > > + * acknowledged. The XlnxZynqMPCAN core receives any
> > message
> > > + * that it transmits.
> > > + */
> > > + if (fifo32_is_full(&s->rx_fifo)) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Loopback: RX FIFO is
> > > full."
> > > + "TX FIFO will be flushed.\n",
> > > s->cfg.ctrl_idx);
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > > + RXOFLW, 1);
> > > + } else {
> > > + for (i = 0; i < CAN_FRAME_SIZE; i++) {
> > > + fifo32_push(&s->rx_fifo, data[i]);
> > > + }
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > > + RXOK, 1);
> > > + }
> > > + } else {
> > > + /* Normal mode Tx. */
> > > + generate_frame(&frame, data);
> > > +
> > > + can_bus_client_send(&s->bus_client, &frame, 1);
> > > + }
> > > + }
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER, TXOK,
> > 1);
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, TXBFLL, 0);
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) {
> > > + can_exit_sleep_mode(s);
> > > + }
> > > + } else {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Not enabled for data transfer.\n",
> > > + s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + can_update_irq(s);
> > > +}
> > > +
> > > +static uint64_t can_srr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, SOFTWARE_RESET_REGISTER, CEN,
> > > + FIELD_EX32(val, SOFTWARE_RESET_REGISTER, CEN));
> > > +
> > > + if (FIELD_EX32(val, SOFTWARE_RESET_REGISTER, SRST)) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Resetting controller.\n", s-
> > >cfg.ctrl_idx);
> > > +
> > > + /* First, core will do software reset then will enter in config
> > > mode.
> > */
> > > + can_config_reset(s);
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) ==
> > 0) {
> > > + can_config_mode(s);
> > > + } else {
> > > + /*
> > > + * Leave config mode. Now XlnxZynqMPCAN core will enter normal,
> > > + * sleep, snoop or loopback mode depending upon LBACK, SLEEP,
> > SNOOP
> > > + * register states.
> > > + */
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, CONFIG, 0);
> > > +
> > > + ptimer_transaction_begin(s->can_timer);
> > > + ptimer_set_count(s->can_timer, 0);
> > > + ptimer_transaction_commit(s->can_timer);
> > > +
> > > + /* XlnxZynqMPCAN is out of config mode. It will send pending
> > > data.
> > */
> > > + transfer_fifo(s, &s->txhpb_fifo);
> > > + transfer_fifo(s, &s->tx_fifo);
> > > + }
> > > +
> > > + update_status_register_mode_bits(s);
> > > +
> > > + return s->regs[R_SOFTWARE_RESET_REGISTER];
> > > +}
> > > +
> > > +static uint64_t can_msr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > + uint8_t multi_mode;
> > > +
> > > + /*
> > > + * Multiple mode set check. This is done to make sure user doesn't
> > > set
> > > + * multiple modes.
> > > + */
> > > + multi_mode = FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK) +
> > > + FIELD_EX32(val, MODE_SELECT_REGISTER, SLEEP) +
> > > + FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP);
> > > +
> > > + if (multi_mode > 1) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to config"
> > > + " several modes simultaneously. One mode will be
> > > selected"
> > > + " according to their priority: LBACK > SLEEP >
> > > SNOOP.\n",
> > > + s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN) ==
> > 0) {
> > > + /* We are in configuration mode, any mode can be selected. */
> > > + s->regs[R_MODE_SELECT_REGISTER] = val;
> > > + } else {
> > > + bool sleep_mode_bit = FIELD_EX32(val, MODE_SELECT_REGISTER,
> > SLEEP);
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, MODE_SELECT_REGISTER, SLEEP,
> > sleep_mode_bit);
> > > +
> > > + if (FIELD_EX32(val, MODE_SELECT_REGISTER, LBACK)) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to set"
> > > + " LBACK mode without setting CEN bit as 0.\n",
> > > + s->cfg.ctrl_idx);
> > > + } else if (FIELD_EX32(val, MODE_SELECT_REGISTER, SNOOP)) {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Attempting to set"
> > > + " SNOOP mode without setting CEN bit as 0.\n",
> > > + s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + update_status_register_mode_bits(s);
> > > + }
> > > + return s->regs[R_MODE_SELECT_REGISTER];
> > > +}
> > > +
> > > +static uint64_t can_brpr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + /* Only allow writes when in config mode. */
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > > + val = s-
> > >regs[R_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER];
> > > + }
> > > +
> > > + return val;
> > > +}
> > > +
> > > +static uint64_t can_btr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + /* Only allow writes when in config mode. */
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > > + val = s->regs[R_ARBITRATION_PHASE_BIT_TIMING_REGISTER];
> > > + }
> > > +
> > > + return val;
> > > +}
> > > +
> > > +static uint64_t can_tcr_pre_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + if (FIELD_EX32(val, TIMESTAMP_REGISTER, CTS)) {
> > > + ptimer_transaction_begin(s->can_timer);
> > > + ptimer_set_count(s->can_timer, 0);
> > > + ptimer_transaction_commit(s->can_timer);
> > > + }
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static void update_rx_fifo(XlnxZynqMPCANState *s, const
> > qemu_can_frame *frame)
> > > +{
> > > + bool filter_pass = false;
> > > + uint16_t timestamp = 0;
> > > +
> > > + /* If no filter is enabled. Message will be stored in FIFO. */
> > > + if (!((ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) |
> > > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) |
> > > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) |
> > > + (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)))) {
> > > + filter_pass = true;
> > > + }
> > > +
> > > + /*
> > > + * Messages that pass any of the acceptance filters will be stored in
> > > + * the RX FIFO.
> > > + */
> > > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1)) {
> > > + uint32_t id_masked = s->regs[R_AFMR1] & frame->can_id;
> > > + uint32_t filter_id_masked = s->regs[R_AFMR1] & s->regs[R_AFIR1];
> > > +
> > > + if (filter_id_masked == id_masked) {
> > > + filter_pass = true;
> > > + }
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF2)) {
> > > + uint32_t id_masked = s->regs[R_AFMR2] & frame->can_id;
> > > + uint32_t filter_id_masked = s->regs[R_AFMR2] & s->regs[R_AFIR2];
> > > +
> > > + if (filter_id_masked == id_masked) {
> > > + filter_pass = true;
> > > + }
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF3)) {
> > > + uint32_t id_masked = s->regs[R_AFMR3] & frame->can_id;
> > > + uint32_t filter_id_masked = s->regs[R_AFMR3] & s->regs[R_AFIR3];
> > > +
> > > + if (filter_id_masked == id_masked) {
> > > + filter_pass = true;
> > > + }
> > > + }
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
> > > + uint32_t id_masked = s->regs[R_AFMR4] & frame->can_id;
> > > + uint32_t filter_id_masked = s->regs[R_AFMR4] & s->regs[R_AFIR4];
> > > +
> > > + if (filter_id_masked == id_masked) {
> > > + filter_pass = true;
> > > + }
> > > + }
> > > +
> > > + /* Store the message in fifo if it passed through any of the
> > > filters. */
> > > + if (filter_pass && frame->can_dlc <= MAX_DLC) {
> > > +
> > > + if (fifo32_is_full(&s->rx_fifo)) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: RX FIFO is full.\n", s-
> > >cfg.ctrl_idx);
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > RXOFLW, 1);
> > > + } else {
> > > + timestamp = CAN_TIMER_MAX - ptimer_get_count(s-
> > >can_timer);
> > > +
> > > + fifo32_push(&s->rx_fifo, frame->can_id);
> > > +
> > > + fifo32_push(&s->rx_fifo, deposit32(0, R_RXFIFO_DLC_DLC_SHIFT,
> > > + R_RXFIFO_DLC_DLC_LENGTH,
> > > + frame->can_dlc) |
> > > + deposit32(0, R_RXFIFO_DLC_RXT_SHIFT,
> > > + R_RXFIFO_DLC_RXT_LENGTH,
> > > + timestamp));
> > > +
> > > + /* First 32 bit of the data. */
> > > + fifo32_push(&s->rx_fifo, deposit32(0,
> > R_TXFIFO_DATA1_DB3_SHIFT,
> > > + R_TXFIFO_DATA1_DB3_LENGTH,
> > > + frame->data[0]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA1_DB2_SHIFT,
> > > + R_TXFIFO_DATA1_DB2_LENGTH,
> > > + frame->data[1]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA1_DB1_SHIFT,
> > > + R_TXFIFO_DATA1_DB1_LENGTH,
> > > + frame->data[2]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA1_DB0_SHIFT,
> > > + R_TXFIFO_DATA1_DB0_LENGTH,
> > > + frame->data[3]));
> > > + /* Last 32 bit of the data. */
> > > + fifo32_push(&s->rx_fifo, deposit32(0,
> > R_TXFIFO_DATA2_DB7_SHIFT,
> > > + R_TXFIFO_DATA2_DB7_LENGTH,
> > > + frame->data[4]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA2_DB6_SHIFT,
> > > + R_TXFIFO_DATA2_DB6_LENGTH,
> > > + frame->data[5]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA2_DB5_SHIFT,
> > > + R_TXFIFO_DATA2_DB5_LENGTH,
> > > + frame->data[6]) |
> > > + deposit32(0,
> > > R_TXFIFO_DATA2_DB4_SHIFT,
> > > + R_TXFIFO_DATA2_DB4_LENGTH,
> > > + frame->data[7]));
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > RXOK, 1);
> > > + }
> > > +
> > > + can_update_irq(s);
> > > + } else {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Message didn't pass through any
> > filter or"
> > > + " dlc is not in range.\n", s->cfg.ctrl_idx);
> > > + }
> > > +}
> > > +
> > > +static uint64_t can_rxfifo_pre_read(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t r = 0;
> > > +
> > > + if (!fifo32_is_empty(&s->rx_fifo)) {
> > > + r = fifo32_pop(&s->rx_fifo);
> > > + } else {
> > > + DB_PRINT("XlnxZynqMPCAN%d: No message in RXFIFO.\n", s-
> > >cfg.ctrl_idx);
> > > +
> > > + ARRAY_FIELD_DP32(s->regs, INTERRUPT_STATUS_REGISTER,
> > RXUFLW, 1);
> > > + }
> > > +
> > > + can_update_irq(s);
> > > + return r;
> > > +}
> > > +
> > > +static void can_filter_enable_post_write(RegisterInfo *reg, uint64_t
> > val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, AFR, UAF1) &&
> > > + ARRAY_FIELD_EX32(s->regs, AFR, UAF2) &&
> > > + ARRAY_FIELD_EX32(s->regs, AFR, UAF3) &&
> > > + ARRAY_FIELD_EX32(s->regs, AFR, UAF4)) {
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 1);
> > > + } else {
> > > + ARRAY_FIELD_DP32(s->regs, STATUS_REGISTER, ACFBSY, 0);
> > > + }
> > > +}
> > > +
> > > +static uint64_t can_filter_mask_pre_write(RegisterInfo *reg, uint64_t
> > val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t reg_idx = (reg->access->addr) / 4;
> > > + uint32_t val = val64;
> > > + uint32_t filter_number = (reg_idx - R_AFMR1) / 2;
> > > +
> > > + /* modify an acceptance filter, the corresponding UAF bit should be
> > '0.' */
> > > + if (!(s->regs[R_AFR] & (1 << filter_number))) {
> > > + s->regs[reg_idx] = val;
> > > + } else {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Acceptance filter %d"
> > > + " mask is not set as corresponding UAF bit is not
> > > 0.\n",
> > > + s->cfg.ctrl_idx, filter_number + 1);
> > > + }
> > > +
> > > + return s->regs[reg_idx];
> > > +}
> > > +
> > > +static uint64_t can_filter_id_pre_write(RegisterInfo *reg, uint64_t
> > val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t reg_idx = (reg->access->addr) / 4;
> > > + uint32_t val = val64;
> > > + uint32_t filter_number = (reg_idx - R_AFIR1) / 2;
> > > +
> > > + if (!(s->regs[R_AFR] & (1 << filter_number))) {
> > > + s->regs[reg_idx] = val;
> > > + } else {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d:
> > Acceptance filter %d"
> > > + " id is not set as corresponding UAF bit is not
> > > 0.\n",
> > > + s->cfg.ctrl_idx, filter_number + 1);
> > > + }
> > > +
> > > + return s->regs[reg_idx];
> > > +}
> > > +
> > > +static void can_tx_post_write(RegisterInfo *reg, uint64_t val64)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(reg->opaque);
> > > + uint32_t val = val64;
> > > +
> > > + bool is_txhpb = reg->access->addr > A_TXFIFO_DATA2;
> > > +
> > > + bool initiate_transfer = (reg->access->addr == A_TXFIFO_DATA2) ||
> > > + (reg->access->addr == A_TXHPB_DATA2);
> > > +
> > > + Fifo32 *f = is_txhpb ? &s->txhpb_fifo : &s->tx_fifo;
> > > +
> > > + DB_PRINT("XlnxZynqMPCAN%d: TX FIFO write.\n", s->cfg.ctrl_idx);
> > > +
> > > + if (!fifo32_is_full(f)) {
> > > + fifo32_push(f, val);
> > > + } else {
> > > + qemu_log_mask(LOG_GUEST_ERROR, "XlnxZynqMPCAN%d: TX FIFO
> > is full.\n",
> > > + s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + /* Initiate the message send if TX register is written. */
> > > + if (initiate_transfer &&
> > > + ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, CEN)) {
> > > + transfer_fifo(s, f);
> > > + }
> > > +
> > > + can_update_irq(s);
> > > +}
> > > +
> > > +static const RegisterAccessInfo can_regs_info[] = {
> > > + { .name = "SOFTWARE_RESET_REGISTER",
> > > + .addr = A_SOFTWARE_RESET_REGISTER,
> > > + .rsvd = 0xfffffffc,
> > > + .pre_write = can_srr_pre_write,
> > > + },{ .name = "MODE_SELECT_REGISTER",
> > > + .addr = A_MODE_SELECT_REGISTER,
> > > + .rsvd = 0xfffffff8,
> > > + .pre_write = can_msr_pre_write,
> > > + },{ .name =
> > "ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER",
> > > + .addr =
> > A_ARBITRATION_PHASE_BAUD_RATE_PRESCALER_REGISTER,
> > > + .rsvd = 0xffffff00,
> > > + .pre_write = can_brpr_pre_write,
> > > + },{ .name = "ARBITRATION_PHASE_BIT_TIMING_REGISTER",
> > > + .addr = A_ARBITRATION_PHASE_BIT_TIMING_REGISTER,
> > > + .rsvd = 0xfffffe00,
> > > + .pre_write = can_btr_pre_write,
> > > + },{ .name = "ERROR_COUNTER_REGISTER",
> > > + .addr = A_ERROR_COUNTER_REGISTER,
> > > + .rsvd = 0xffff0000,
> > > + .ro = 0xffffffff,
> > > + },{ .name = "ERROR_STATUS_REGISTER",
> > > + .addr = A_ERROR_STATUS_REGISTER,
> > > + .rsvd = 0xffffffe0,
> > > + .w1c = 0x1f,
> > > + },{ .name = "STATUS_REGISTER", .addr = A_STATUS_REGISTER,
> > > + .reset = 0x1,
> > > + .rsvd = 0xffffe000,
> > > + .ro = 0x1fff,
> > > + },{ .name = "INTERRUPT_STATUS_REGISTER",
> > > + .addr = A_INTERRUPT_STATUS_REGISTER,
> > > + .reset = 0x6000,
> > > + .rsvd = 0xffff8000,
> > > + .ro = 0x7fff,
> > > + },{ .name = "INTERRUPT_ENABLE_REGISTER",
> > > + .addr = A_INTERRUPT_ENABLE_REGISTER,
> > > + .rsvd = 0xffff8000,
> > > + .post_write = can_ier_post_write,
> > > + },{ .name = "INTERRUPT_CLEAR_REGISTER",
> > > + .addr = A_INTERRUPT_CLEAR_REGISTER,
> > > + .rsvd = 0xffff8000,
> > > + .pre_write = can_icr_pre_write,
> > > + },{ .name = "TIMESTAMP_REGISTER",
> > > + .addr = A_TIMESTAMP_REGISTER,
> > > + .rsvd = 0xfffffffe,
> > > + .pre_write = can_tcr_pre_write,
> > > + },{ .name = "WIR", .addr = A_WIR,
> > > + .reset = 0x3f3f,
> > > + .rsvd = 0xffff0000,
> > > + },{ .name = "TXFIFO_ID", .addr = A_TXFIFO_ID,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXFIFO_DLC", .addr = A_TXFIFO_DLC,
> > > + .rsvd = 0xfffffff,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXFIFO_DATA1", .addr = A_TXFIFO_DATA1,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXFIFO_DATA2", .addr = A_TXFIFO_DATA2,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXHPB_ID", .addr = A_TXHPB_ID,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXHPB_DLC", .addr = A_TXHPB_DLC,
> > > + .rsvd = 0xfffffff,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXHPB_DATA1", .addr = A_TXHPB_DATA1,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "TXHPB_DATA2", .addr = A_TXHPB_DATA2,
> > > + .post_write = can_tx_post_write,
> > > + },{ .name = "RXFIFO_ID", .addr = A_RXFIFO_ID,
> > > + .ro = 0xffffffff,
> > > + .post_read = can_rxfifo_pre_read,
> > > + },{ .name = "RXFIFO_DLC", .addr = A_RXFIFO_DLC,
> > > + .rsvd = 0xfff0000,
> > > + .post_read = can_rxfifo_pre_read,
> > > + },{ .name = "RXFIFO_DATA1", .addr = A_RXFIFO_DATA1,
> > > + .post_read = can_rxfifo_pre_read,
> > > + },{ .name = "RXFIFO_DATA2", .addr = A_RXFIFO_DATA2,
> > > + .post_read = can_rxfifo_pre_read,
> > > + },{ .name = "AFR", .addr = A_AFR,
> > > + .rsvd = 0xfffffff0,
> > > + .post_write = can_filter_enable_post_write,
> > > + },{ .name = "AFMR1", .addr = A_AFMR1,
> > > + .pre_write = can_filter_mask_pre_write,
> > > + },{ .name = "AFIR1", .addr = A_AFIR1,
> > > + .pre_write = can_filter_id_pre_write,
> > > + },{ .name = "AFMR2", .addr = A_AFMR2,
> > > + .pre_write = can_filter_mask_pre_write,
> > > + },{ .name = "AFIR2", .addr = A_AFIR2,
> > > + .pre_write = can_filter_id_pre_write,
> > > + },{ .name = "AFMR3", .addr = A_AFMR3,
> > > + .pre_write = can_filter_mask_pre_write,
> > > + },{ .name = "AFIR3", .addr = A_AFIR3,
> > > + .pre_write = can_filter_id_pre_write,
> > > + },{ .name = "AFMR4", .addr = A_AFMR4,
> > > + .pre_write = can_filter_mask_pre_write,
> > > + },{ .name = "AFIR4", .addr = A_AFIR4,
> > > + .pre_write = can_filter_id_pre_write,
> > > + }
> > > +};
> > > +
> > > +static void xlnx_zynqmp_can_ptimer_cb(void *opaque)
> > > +{
> > > + /* No action required on the timer rollover. */
> > > +}
> > > +
> > > +static const MemoryRegionOps can_ops = {
> > > + .read = register_read_memory,
> > > + .write = register_write_memory,
> > > + .endianness = DEVICE_LITTLE_ENDIAN,
> > > + .valid = {
> > > + .min_access_size = 4,
> > > + .max_access_size = 4,
> > > + },
> > > +};
> > > +
> > > +static void xlnx_zynqmp_can_reset_init(Object *obj, ResetType type)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
> > > + unsigned int i;
> > > +
> > > + for (i = R_RXFIFO_ID; i < ARRAY_SIZE(s->reg_info); ++i) {
> > > + register_reset(&s->reg_info[i]);
> > > + }
> > > +
> > > + ptimer_transaction_begin(s->can_timer);
> > > + ptimer_set_count(s->can_timer, 0);
> > > + ptimer_transaction_commit(s->can_timer);
> > > +}
> > > +
> > > +static void xlnx_zynqmp_can_reset_hold(Object *obj)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
> > > + unsigned int i;
> > > +
> > > + for (i = 0; i < R_RXFIFO_ID; ++i) {
> > > + register_reset(&s->reg_info[i]);
> > > + }
> > > +
> > > + /*
> > > + * Reset FIFOs when CAN model is reset. This will clear the fifo
> > > writes
> > > + * done by post_write which gets called from register_reset function,
> > > + * post_write handle will not be able to trigger tx because CAN will
> > > be
> > > + * disabled when software_reset_register is cleared first.
> > > + */
> > > + fifo32_reset(&s->rx_fifo);
> > > + fifo32_reset(&s->tx_fifo);
> > > + fifo32_reset(&s->txhpb_fifo);
> > > +}
> > > +
> > > +static bool xlnx_zynqmp_can_can_receive(CanBusClientState *client)
> > > +{
> > > + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
> > > + bus_client);
> > > +
> > > + if (ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER, SRST)) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Controller is in reset.\n", s-
> > >cfg.ctrl_idx);
> > > + return false;
> > > + } else if ((ARRAY_FIELD_EX32(s->regs, SOFTWARE_RESET_REGISTER,
> > CEN)) == 0) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Controller is disabled. Incoming
> > messages"
> > > + " will be discarded.\n", s->cfg.ctrl_idx);
> > > + return false;
> > > + } else {
> > > + return true;
> > > + }
> > > +}
> > > +
> > > +static ssize_t xlnx_zynqmp_can_receive(CanBusClientState *client,
> > > + const qemu_can_frame *buf, size_t
> > > buf_size) {
> > > + XlnxZynqMPCANState *s = container_of(client, XlnxZynqMPCANState,
> > > + bus_client);
> > > + const qemu_can_frame *frame = buf;
> > > +
> > > + DB_PRINT("XlnxZynqMPCAN%d: Incoming data.\n", s->cfg.ctrl_idx);
> > > +
> > > + if (buf_size <= 0) {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Junk data received.\n", s-
> > >cfg.ctrl_idx);
> > > + return 0;
> > > + }
> > > + if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, LBACK)) {
> > > + /*
> > > + * XlnxZynqMPCAN will not participate in normal bus
> > communication
> > > + * and will not receive any messages transmitted by other CAN
> > nodes.
> > > + */
> > > + DB_PRINT("XlnxZynqMPCAN%d: Controller is in loopback mode. It
> > will not"
> > > + " receive data.\n", s->cfg.ctrl_idx);
> > > +
> > > + } else if (ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SNOOP)) {
> > > + /* Snoop Mode: Just keep the data. no response back. */
> > > + update_rx_fifo(s, frame);
> > > + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP))) {
> > > + /*
> > > + * XlnxZynqMPCAN is in sleep mode. Any data on bus will bring it
> > > to
> > wake
> > > + * up state.
> > > + */
> > > + can_exit_sleep_mode(s);
> > > + update_rx_fifo(s, frame);
> > > + } else if ((ARRAY_FIELD_EX32(s->regs, STATUS_REGISTER, SLEEP)) == 0)
> > {
> > > + update_rx_fifo(s, frame);
> > > + } else {
> > > + DB_PRINT("XlnxZynqMPCAN%d: Cannot receive data as controller is
> > not"
> > > + " configured correctly.\n", s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + return 1;
> > > +}
> > > +
> > > +static CanBusClientInfo can_xilinx_bus_client_info = {
> > > + .can_receive = xlnx_zynqmp_can_can_receive,
> > > + .receive = xlnx_zynqmp_can_receive,
> > > +};
> > > +
> > > +static int xlnx_zynqmp_can_connect_to_bus(XlnxZynqMPCANState *s,
> > > + CanBusState *bus)
> > > +{
> > > + s->bus_client.info = &can_xilinx_bus_client_info;
> > > +
> > > + if (can_bus_insert_client(bus, &s->bus_client) < 0) {
> > > + return -1;
> > > + }
> > > + return 0;
> > > +}
> > > +
> > > +static void xlnx_zynqmp_can_realize(DeviceState *dev, Error **errp)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(dev);
> > > +
> > > + if (s->cfg.ctrl_idx >= MAX_CAN_CTRLS) {
> > > + error_setg(errp, "XlnxZynqMPCAN%d: ctrl-idx exceeds max
> > controller"
> > > + " index.", s->cfg.ctrl_idx);
> > > + return;
> > > + }
> > > +
> > > + if (s->canbus[s->cfg.ctrl_idx]) {
> > > + if (xlnx_zynqmp_can_connect_to_bus(s, s->canbus[s->cfg.ctrl_idx])
> > < 0) {
> > > + error_setg(errp, "XlnxZynqMPCAN%d:
> > xlnx_zynqmp_can_connect_to_bus"
> > > + " failed.", s->cfg.ctrl_idx);
> > > + return;
> > > + }
> > > +
> > > + } else {
> > > + /* If no bus is set. */
> > > + DB_PRINT("XlnxZynqMPCAN%d: Canbus property is not set.\n",
> > > + s->cfg.ctrl_idx);
> > > + }
> > > +
> > > + /* Create RX FIFO, TXFIFO, TXHPB storage. */
> > > + fifo32_create(&s->rx_fifo, RXFIFO_SIZE);
> > > + fifo32_create(&s->tx_fifo, RXFIFO_SIZE);
> > > + fifo32_create(&s->txhpb_fifo, CAN_FRAME_SIZE);
> > > +
> > > + /* Allocate a new timer. */
> > > + s->can_timer = ptimer_init(xlnx_zynqmp_can_ptimer_cb, s,
> > > + PTIMER_POLICY_DEFAULT);
> > > +
> > > + ptimer_transaction_begin(s->can_timer);
> > > +
> > > + ptimer_set_freq(s->can_timer, s->cfg.ext_clk_freq);
> > > + ptimer_set_limit(s->can_timer, CAN_TIMER_MAX, 1);
> > > + ptimer_run(s->can_timer, 0);
> > > + ptimer_transaction_commit(s->can_timer);
> > > +}
> > > +
> > > +static void xlnx_zynqmp_can_init(Object *obj)
> > > +{
> > > + XlnxZynqMPCANState *s = XLNX_ZYNQMP_CAN(obj);
> > > + SysBusDevice *sbd = SYS_BUS_DEVICE(obj);
> > > +
> > > + RegisterInfoArray *reg_array;
> > > +
> > > + memory_region_init(&s->iomem, obj, TYPE_XLNX_ZYNQMP_CAN,
> > > + XLNX_ZYNQMP_CAN_R_MAX * 4);
> > > + reg_array = register_init_block32(DEVICE(obj), can_regs_info,
> > > + ARRAY_SIZE(can_regs_info),
> > > + s->reg_info, s->regs,
> > > + &can_ops,
> > > + XLNX_ZYNQMP_CAN_ERR_DEBUG,
> > > + XLNX_ZYNQMP_CAN_R_MAX * 4);
> > > +
> > > + memory_region_add_subregion(&s->iomem, 0x00, ®_array-
> > >mem);
> > > + sysbus_init_mmio(sbd, &s->iomem);
> > > + sysbus_init_irq(SYS_BUS_DEVICE(obj), &s->irq);
> > > +
> > > + object_property_add_link(obj, "canbus0", TYPE_CAN_BUS,
> > > + (Object **)&s->canbus[0],
> > > + qdev_prop_allow_set_link_before_realize,
> > > + 0);
> > > +
> > > + object_property_add_link(obj, "canbus1", TYPE_CAN_BUS,
> > > + (Object **)&s->canbus[1],
> > > + qdev_prop_allow_set_link_before_realize,
> > > + 0);
> >
> >
> > It looks to me like if we are creating 2 zynqmp CAN controllers at the
> > machine level,
> > each of them creates 2 canbusses but we only use one bus per controller.
> Each controller doesn't create two buses. It just connects one bus to the
> controller. Reason for us to put two buses was to make things distinct when
> we connect buses through command line.
Yeah, I meant to refer to the two canbus links but only one used per controller.
> >
> > ctrl_idx is used to selet the canbus, and only for that.
> > So why not remove ctrl_idx alltogether and only create one canbus per
> > controller?
> ctrl_idx was something we added to selecting the bus and also keeping both
> CAN0 and CAN1 controller separated by an ID number. This comes handy when
> user enables debug prints for CAN.
> There is also a case when both CAN controller gets connected to separate
> buses instead of one shared. But this can be replaced with one bus(As you
> suggested) if we handle all bus connection machine creation part.
Yeah, I think you should have one canbus link only and remove ctrl_idx, it's a
little bit of a hack.
If you want friendly instance names for debug-logs you can use
object_get_canonical_path().
> > We'd need a way to assign the canbus objects to the links instead of
> > relying on -global driver=xlnx.zynqmp-
> > can,property=canbus0,value=canbus0.
> >
> > Or perhaps creating the canbusses at the zynqmp machine level and
> > assigning
> > them in C code, avoiding the need for the user to create them on the
> > command-line
> > with -object.
> Yeah, I agree with this. @Francisco Iglesias, we did go back and forth on
> this choice, what you say about reverting this back to doing all canbus
> handling at machine creation stage?
I see, OK.
Supporting the case with one canbus used by both controllers becomes a little
messy.
I guess you could have one canbus prop per CAN controller and have two canbus
props
at the machine level. E.g zcu102.canbus0 and zcu102.canbus1 that get propagated
to
the zynqmp controllers can[0].canbus and can[1].canbus props.
The user could still use -object can-bus,id=canbus0 and then connect those to
the
machine props zcu102.canbus0 and 1.
Or we could make the zcu102 machine code connect canbus0 to can[0].canbus
and if canbus1 does not exist connect canbus0 to can[1].canbus aswell.
In this case the user would only need to create canbus objects with
predefined names (canbus0 and optionally canbus1) and those would get auto
attached by the machine.
Perhaps someone else has better suggestions....
Best regards,
Edgar
> >
> > I think the latter is more in line with what we do with other busses...
> >
> >
> >
> >
> > > +}
> > > +
> > > +static const VMStateDescription vmstate_can = {
> > > + .name = TYPE_XLNX_ZYNQMP_CAN,
> > > + .version_id = 1,
> > > + .minimum_version_id = 1,
> > > + .fields = (VMStateField[]) {
> > > + VMSTATE_FIFO32(rx_fifo, XlnxZynqMPCANState),
> > > + VMSTATE_FIFO32(tx_fifo, XlnxZynqMPCANState),
> > > + VMSTATE_FIFO32(txhpb_fifo, XlnxZynqMPCANState),
> > > + VMSTATE_UINT32_ARRAY(regs, XlnxZynqMPCANState,
> > XLNX_ZYNQMP_CAN_R_MAX),
> > > + VMSTATE_UINT8(cfg.ctrl_idx, XlnxZynqMPCANState),
> > > + VMSTATE_UINT32(cfg.ext_clk_freq, XlnxZynqMPCANState),
> >
> > Looks like ctrl_idx and ext_clk_freq are machine selected and constant per
> > VM,
> > so I'd assume those don't need VMState entries...
> Thanks for catching this! I will remove these in next patch.
> >
> >
> >
> >
> > > + VMSTATE_PTIMER(can_timer, XlnxZynqMPCANState),
> > > + VMSTATE_END_OF_LIST(),
> > > + }
> > > +};
> > > +
> > > +static Property xlnx_zynqmp_can_properties[] = {
> > > + DEFINE_PROP_UINT8("ctrl-idx", XlnxZynqMPCANState, cfg.ctrl_idx, 0),
> > > + DEFINE_PROP_UINT32("ext_clk_freq", XlnxZynqMPCANState,
> > cfg.ext_clk_freq,
> > > + CAN_DEFAULT_CLOCK),
> > > + DEFINE_PROP_END_OF_LIST(),
> > > +};
> > > +
> > > +static void xlnx_zynqmp_can_class_init(ObjectClass *klass, void *data)
> > > +{
> > > + DeviceClass *dc = DEVICE_CLASS(klass);
> > > + ResettableClass *rc = RESETTABLE_CLASS(klass);
> > > +
> > > + rc->phases.enter = xlnx_zynqmp_can_reset_init;
> > > + rc->phases.hold = xlnx_zynqmp_can_reset_hold;
> > > + dc->realize = xlnx_zynqmp_can_realize;
> > > + device_class_set_props(dc, xlnx_zynqmp_can_properties);
> > > + dc->vmsd = &vmstate_can;
> > > +}
> > > +
> > > +static const TypeInfo can_info = {
> > > + .name = TYPE_XLNX_ZYNQMP_CAN,
> > > + .parent = TYPE_SYS_BUS_DEVICE,
> > > + .instance_size = sizeof(XlnxZynqMPCANState),
> > > + .class_init = xlnx_zynqmp_can_class_init,
> > > + .instance_init = xlnx_zynqmp_can_init,
> > > +};
> > > +
> > > +static void can_register_types(void)
> > > +{
> > > + type_register_static(&can_info);
> > > +}
> > > +
> > > +type_init(can_register_types)
> > > diff --git a/include/hw/net/xlnx-zynqmp-can.h b/include/hw/net/xlnx-
> > zynqmp-can.h
> > > new file mode 100644
> > > index 0000000..ab720bf
> > > --- /dev/null
> > > +++ b/include/hw/net/xlnx-zynqmp-can.h
> > > @@ -0,0 +1,79 @@
> > > +/*
> > > + * QEMU model of the Xilinx ZynqMP CAN controller.
> > > + *
> > > + * Copyright (c) 2020 Xilinx Inc.
> > > + *
> > > + * Written-by: Vikram Garhwal<fnu.vikram@xilinx.com>
> > > + *
> > > + * Based on QEMU CAN Device emulation implemented by Jin Yang,
> > Deniz Eren and
> > > + * Pavel Pisa.
> > > + *
> > > + * Permission is hereby granted, free of charge, to any person obtaining
> > a copy
> > > + * of this software and associated documentation files (the "Software"),
> > to deal
> > > + * in the Software without restriction, including without limitation the
> > rights
> > > + * to use, copy, modify, merge, publish, distribute, sublicense, and/or
> > sell
> > > + * copies of the Software, and to permit persons to whom the Software
> > is
> > > + * furnished to do so, subject to the following conditions:
> > > + *
> > > + * The above copyright notice and this permission notice shall be
> > included in
> > > + * all copies or substantial portions of the Software.
> > > + *
> > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY
> > KIND, EXPRESS OR
> > > + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
> > MERCHANTABILITY,
> > > + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO
> > EVENT SHALL
> > > + * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM,
> > DAMAGES OR OTHER
> > > + * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR
> > OTHERWISE, ARISING FROM,
> > > + * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
> > OTHER DEALINGS IN
> > > + * THE SOFTWARE.
> > > + */
> > > +
> > > +#ifndef XLNX_ZYNQMP_CAN_H
> > > +#define XLNX_ZYNQMP_CAN_H
> > > +
> > > +#include "hw/register.h"
> > > +#include "net/can_emu.h"
> > > +#include "net/can_host.h"
> > > +#include "qemu/fifo32.h"
> > > +#include "hw/ptimer.h"
> > > +#include "hw/qdev-clock.h"
> > > +
> > > +#define TYPE_XLNX_ZYNQMP_CAN "xlnx.zynqmp-can"
> > > +
> > > +#define XLNX_ZYNQMP_CAN(obj) \
> > > + OBJECT_CHECK(XlnxZynqMPCANState, (obj),
> > TYPE_XLNX_ZYNQMP_CAN)
> > > +
> > > +#define MAX_CAN_CTRLS 2
> >
> > It looks to me like if this is a property of the machine and not of
> > the individual CAN controllers.
> This is make sure user doesn't assign the CAN ctrl_idx beyond CAN0 and CAN1.
> Just something we thought to align the CAN controller names with datasheet.
> Perhaps I rename this to "MAX_CAN_CTRL_ID_NUM"?
> >
> >
> > > +#define XLNX_ZYNQMP_CAN_R_MAX (0x84 / 4)
> > > +#define MAILBOX_CAPACITY 64
> > > +#define CAN_TIMER_MAX 0XFFFFUL
> > > +#define CAN_DEFAULT_CLOCK (24 * 1000 * 1000)
> > > +
> > > +/* Each CAN_FRAME will have 4 * 32bit size. */
> > > +#define CAN_FRAME_SIZE 4
> > > +#define RXFIFO_SIZE (MAILBOX_CAPACITY * CAN_FRAME_SIZE)
> > > +
> > > +typedef struct XlnxZynqMPCANState {
> > > + SysBusDevice parent_obj;
> > > + MemoryRegion iomem;
> > > +
> > > + qemu_irq irq;
> > > +
> > > + CanBusClientState bus_client;
> > > + CanBusState *canbus[MAX_CAN_CTRLS];
> > > +
> > > + struct {
> > > + uint8_t ctrl_idx;
> > > + uint32_t ext_clk_freq;
> > > + } cfg;
> > > +
> > > + RegisterInfo reg_info[XLNX_ZYNQMP_CAN_R_MAX];
> > > + uint32_t regs[XLNX_ZYNQMP_CAN_R_MAX];
> > > +
> > > + Fifo32 rx_fifo;
> > > + Fifo32 tx_fifo;
> > > + Fifo32 txhpb_fifo;
> > > +
> > > + ptimer_state *can_timer;
> > > +} XlnxZynqMPCANState;
> > > +
> > > +#endif
> > > --
> > > 2.7.4
> > >