[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v5 08/20] microvm/acpi: add minimal acpi support
From: |
Michael S. Tsirkin |
Subject: |
Re: [PATCH v5 08/20] microvm/acpi: add minimal acpi support |
Date: |
Wed, 8 Jul 2020 12:52:20 -0400 |
On Tue, Jul 07, 2020 at 02:53:44PM +0200, Gerd Hoffmann wrote:
> $subject says all. Can be controlled using -M microvm,acpi=on/off.
>
> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Overall I don't see bugs here. Some comments are bit confusing
and I point that out below. With that addressed:
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
> ---
> hw/i386/acpi-microvm.h | 8 ++
> include/hw/i386/microvm.h | 9 ++
> hw/i386/acpi-microvm.c | 195 ++++++++++++++++++++++++++++++++++++++
> hw/i386/microvm.c | 40 ++++++++
> hw/i386/Kconfig | 1 +
> hw/i386/Makefile.objs | 1 +
> 6 files changed, 254 insertions(+)
> create mode 100644 hw/i386/acpi-microvm.h
> create mode 100644 hw/i386/acpi-microvm.c
>
> diff --git a/hw/i386/acpi-microvm.h b/hw/i386/acpi-microvm.h
> new file mode 100644
> index 000000000000..dfe853690e15
> --- /dev/null
> +++ b/hw/i386/acpi-microvm.h
> @@ -0,0 +1,8 @@
> +#ifndef HW_I386_ACPI_MICROVM_H
> +#define HW_I386_ACPI_MICROVM_H
> +
> +#include "hw/i386/microvm.h"
> +
> +void acpi_setup_microvm(MicrovmMachineState *mms);
> +
> +#endif
> diff --git a/include/hw/i386/microvm.h b/include/hw/i386/microvm.h
> index 03e735723726..b6e0d4395af7 100644
> --- a/include/hw/i386/microvm.h
> +++ b/include/hw/i386/microvm.h
> @@ -24,12 +24,18 @@
>
> #include "hw/boards.h"
> #include "hw/i386/x86.h"
> +#include "hw/acpi/acpi_dev_interface.h"
>
> /* Platform virtio definitions */
> #define VIRTIO_MMIO_BASE 0xfeb00000
> #define VIRTIO_NUM_TRANSPORTS 8
> #define VIRTIO_CMDLINE_MAXLEN 64
>
> +#define GED_MMIO_BASE 0xfea00000
> +#define GED_MMIO_BASE_MEMHP (GED_MMIO_BASE + 0x100)
> +#define GED_MMIO_BASE_REGS (GED_MMIO_BASE + 0x200)
> +#define GED_MMIO_IRQ 9
> +
> /* Machine type options */
> #define MICROVM_MACHINE_PIT "pit"
> #define MICROVM_MACHINE_PIC "pic"
> @@ -58,6 +64,9 @@ typedef struct {
> /* Machine state */
> uint32_t virtio_irq_base;
> bool kernel_cmdline_fixed;
> + Notifier machine_done;
> + Notifier powerdown_req;
> + AcpiDeviceIf *acpi_dev;
> } MicrovmMachineState;
>
> #define TYPE_MICROVM_MACHINE MACHINE_TYPE_NAME("microvm")
> diff --git a/hw/i386/acpi-microvm.c b/hw/i386/acpi-microvm.c
> new file mode 100644
> index 000000000000..6c4178caefee
> --- /dev/null
> +++ b/hw/i386/acpi-microvm.c
> @@ -0,0 +1,195 @@
> +/* Support for generating ACPI tables and passing them to Guests
> + *
> + * Copyright (C) 2008-2010 Kevin O'Connor <kevin@koconnor.net>
> + * Copyright (C) 2006 Fabrice Bellard
> + * Copyright (C) 2013 Red Hat Inc
> + *
> + * Author: Michael S. Tsirkin <mst@redhat.com>
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> +
> + * This program is distributed in the hope that it will be useful,
> + * but WITHOUT ANY WARRANTY; without even the implied warranty of
> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> + * GNU General Public License for more details.
> +
> + * You should have received a copy of the GNU General Public License along
> + * with this program; if not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#include "qemu/osdep.h"
> +#include "qapi/error.h"
> +
> +#include "exec/memory.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/aml-build.h"
> +#include "hw/acpi/bios-linker-loader.h"
> +#include "hw/acpi/generic_event_device.h"
> +#include "hw/acpi/utils.h"
> +#include "hw/boards.h"
> +#include "hw/i386/fw_cfg.h"
> +#include "hw/i386/microvm.h"
> +
> +#include "acpi-common.h"
> +#include "acpi-microvm.h"
> +
> +static void
> +build_dsdt_microvm(GArray *table_data, BIOSLinker *linker,
> + MicrovmMachineState *mms)
> +{
> + X86MachineState *x86ms = X86_MACHINE(mms);
> + Aml *dsdt, *sb_scope, *scope, *pkg;
> + bool ambiguous;
> + Object *isabus;
> +
> + isabus = object_resolve_path_type("", TYPE_ISA_BUS, &ambiguous);
> + assert(isabus);
> + assert(!ambiguous);
> +
> + dsdt = init_aml_allocator();
> +
> + /* Reserve space for header */
> + acpi_data_push(dsdt->buf, sizeof(AcpiTableHeader));
> +
> + sb_scope = aml_scope("_SB");
> + fw_cfg_add_acpi_dsdt(sb_scope, x86ms->fw_cfg);
> + isa_build_aml(ISA_BUS(isabus), sb_scope);
> + build_ged_aml(sb_scope, GED_DEVICE, HOTPLUG_HANDLER(mms->acpi_dev),
> + GED_MMIO_IRQ, AML_SYSTEM_MEMORY, GED_MMIO_BASE);
> + acpi_dsdt_add_power_button(sb_scope);
> + aml_append(dsdt, sb_scope);
> +
> + scope = aml_scope("\\");
> + pkg = aml_package(4);
> + aml_append(pkg, aml_int(5)); /* SLEEP_CONTROL_REG.SLP_TYP */
I'm not sure what does the comment refer to here.
Does this 5 match
the value IO handler tests against? A macro might make sense then ...
Below is from "7.3.4 System \_Sx states" right?
> + aml_append(pkg, aml_int(0)); /* ignored */
> + aml_append(pkg, aml_int(0)); /* reserved */
> + aml_append(pkg, aml_int(0)); /* reserved */
> + aml_append(scope, aml_name_decl("_S5", pkg));
> + aml_append(dsdt, scope);
> +
> + /* copy AML table into ACPI tables blob and patch header there */
> + g_array_append_vals(table_data, dsdt->buf->data, dsdt->buf->len);
> + build_header(linker, table_data,
> + (void *)(table_data->data + table_data->len - dsdt->buf->len),
> + "DSDT", dsdt->buf->len, 2, NULL, NULL);
/* DSDT always uses revision 2 */.
> + free_aml_allocator();
> +}
> +
> +static void acpi_build_microvm(AcpiBuildTables *tables,
> + MicrovmMachineState *mms)
> +{
> + MachineState *machine = MACHINE(mms);
> + GArray *table_offsets;
> + GArray *tables_blob = tables->table_data;
> + unsigned dsdt, xsdt;
> + AcpiFadtData pmfadt = {
> + /*
> + * minimum version for ACPI_FADT_F_HW_REDUCED_ACPI,
> + * see acpi spec "4.1 Hardware-Reduced ACPI"
Spec version - I'm guessing ACPI spec 5.0.
And I think here is where you refer to
Table 5-34 Fixed ACPI Description Table (FADT) Format
> + */
> + .rev = 5,
> + .minor_ver = 1,
So 5.1 I am guessing just copied from virt/arm?
Or do you know why?
If not all we can say is /* ACPI v5.1 */
like ARM does, rest is guesswork ...
> +
> + .flags = ((1 << ACPI_FADT_F_HW_REDUCED_ACPI) |
> + (1 << ACPI_FADT_F_RESET_REG_SUP)),
> +
> + /* Table 5-33 FADT Format -- SLEEP_CONTROL_REG */
You need to use the earliest spec version that includes
a specific feature - and document which one it is.
In version 5 table 5-33 is XSDT.
Generally it took me a while to understand this comment.
It makes it look like
one needs to find SLEEP_CONTROL_REG in Table 5-33
You mean the address refers to SLEEP_CONTROL_REG.
So put the comment near the address pls.
But the main poit is AcpiFadtData actually has nothing to do with
FADT format. It's an abstracted API
> + .sleep_ctl = {
> + .space_id = AML_AS_SYSTEM_MEMORY,
> + .bit_width = 8,
> + .address = GED_MMIO_BASE_REGS + ACPI_GED_REG_SLEEP_CTL,
> + },
> +
> + /* Table 5-33 FADT Format -- SLEEP_STATUS_REG */
> + .sleep_sts = {
> + .space_id = AML_AS_SYSTEM_MEMORY,
> + .bit_width = 8,
> + .address = GED_MMIO_BASE_REGS + ACPI_GED_REG_SLEEP_STS,
> + },
> +
> + /* Table 5-33 FADT Format -- RESET_REG */
> + .reset_reg = {
> + .space_id = AML_AS_SYSTEM_MEMORY,
> + .bit_width = 8,
> + .address = GED_MMIO_BASE_REGS + ACPI_GED_REG_RESET,
> + },
> +
> + /* Table 5-33 FADT Format -- RESET_VALUE */
> + .reset_val = ACPI_GED_RESET_VALUE,
> + };
> +
> + table_offsets = g_array_new(false, true /* clear */,
> + sizeof(uint32_t));
> + bios_linker_loader_alloc(tables->linker,
> + ACPI_BUILD_TABLE_FILE, tables_blob,
> + 64 /* Ensure FACS is aligned */,
> + false /* high memory */);
> +
> + dsdt = tables_blob->len;
> + build_dsdt_microvm(tables_blob, tables->linker, mms);
> +
> + pmfadt.dsdt_tbl_offset = &dsdt;
> + pmfadt.xdsdt_tbl_offset = &dsdt;
> + acpi_add_table(table_offsets, tables_blob);
> + build_fadt(tables_blob, tables->linker, &pmfadt, NULL, NULL);
> +
> + acpi_add_table(table_offsets, tables_blob);
> + acpi_build_madt(tables_blob, tables->linker, X86_MACHINE(machine),
> + mms->acpi_dev, false);
> +
> + xsdt = tables_blob->len;
> + build_xsdt(tables_blob, tables->linker, table_offsets, NULL, NULL);
> +
> + /* RSDP is in FSEG memory, so allocate it separately */
> + {
> + AcpiRsdpData rsdp_data = {
> + /* Table 5-27 RSDP Structure */
RSDP is since ACPI 2.0, table number there is different.
> + .revision = 2, /* rev2 needed for xsdt support */
> + .oem_id = ACPI_BUILD_APPNAME6,
> + .xsdt_tbl_offset = &xsdt,
> + .rsdt_tbl_offset = NULL,
> + };
> + build_rsdp(tables->rsdp, tables->linker, &rsdp_data);
> + }
> +
> + /* Cleanup memory that's no longer used. */
> + g_array_free(table_offsets, true);
> +}
> +
> +static void acpi_build_no_update(void *build_opaque)
> +{
> + /* nothing, microvm tables don't change at runtime */
> +}
> +
> +void acpi_setup_microvm(MicrovmMachineState *mms)
> +{
> + X86MachineState *x86ms = X86_MACHINE(mms);
> + AcpiBuildTables tables;
> +
> + assert(x86ms->fw_cfg);
> +
> + if (!x86_machine_is_acpi_enabled(x86ms)) {
> + return;
> + }
> +
> + acpi_build_tables_init(&tables);
> + acpi_build_microvm(&tables, mms);
> +
> + /* Now expose it all to Guest */
> + acpi_add_rom_blob(acpi_build_no_update, NULL,
> + tables.table_data,
> + ACPI_BUILD_TABLE_FILE,
> + ACPI_BUILD_TABLE_MAX_SIZE);
> + acpi_add_rom_blob(acpi_build_no_update, NULL,
> + tables.linker->cmd_blob,
> + "etc/table-loader", 0);
> + acpi_add_rom_blob(acpi_build_no_update, NULL,
> + tables.rsdp,
> + ACPI_BUILD_RSDP_FILE, 0);
> +
> + acpi_build_tables_cleanup(&tables, false);
> +}
> diff --git a/hw/i386/microvm.c b/hw/i386/microvm.c
> index ab6ee6c67b1a..75eca7306b11 100644
> --- a/hw/i386/microvm.c
> +++ b/hw/i386/microvm.c
> @@ -26,6 +26,8 @@
> #include "sysemu/cpus.h"
> #include "sysemu/numa.h"
> #include "sysemu/reset.h"
> +#include "sysemu/runstate.h"
> +#include "acpi-microvm.h"
>
> #include "hw/loader.h"
> #include "hw/irq.h"
> @@ -41,6 +43,8 @@
> #include "hw/i386/e820_memory_layout.h"
> #include "hw/i386/fw_cfg.h"
> #include "hw/virtio/virtio-mmio.h"
> +#include "hw/acpi/acpi.h"
> +#include "hw/acpi/generic_event_device.h"
>
> #include "cpu.h"
> #include "elf.h"
> @@ -129,6 +133,17 @@ static void microvm_devices_init(MicrovmMachineState
> *mms)
> }
>
> /* Optional and legacy devices */
> + if (x86_machine_is_acpi_enabled(x86ms)) {
> + DeviceState *dev = qdev_new(TYPE_ACPI_GED_X86);
> + qdev_prop_set_uint32(dev, "ged-event", ACPI_GED_PWR_DOWN_EVT);
> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, GED_MMIO_BASE);
> + /* sysbus_mmio_map(SYS_BUS_DEVICE(dev), 1, GED_MMIO_BASE_MEMHP); */
> + sysbus_mmio_map(SYS_BUS_DEVICE(dev), 2, GED_MMIO_BASE_REGS);
> + sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0,
> + x86ms->gsi[GED_MMIO_IRQ]);
> + sysbus_realize(SYS_BUS_DEVICE(dev), &error_fatal);
> + mms->acpi_dev = ACPI_DEVICE_IF(dev);
> + }
>
> if (mms->pic == ON_OFF_AUTO_ON || mms->pic == ON_OFF_AUTO_AUTO) {
> qemu_irq *i8259;
> @@ -438,6 +453,26 @@ static void
> microvm_machine_set_auto_kernel_cmdline(Object *obj, bool value,
> mms->auto_kernel_cmdline = value;
> }
>
> +static void microvm_machine_done(Notifier *notifier, void *data)
> +{
> + MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState,
> + machine_done);
> +
> + acpi_setup_microvm(mms);
> +}
> +
> +static void microvm_powerdown_req(Notifier *notifier, void *data)
> +{
> + MicrovmMachineState *mms = container_of(notifier, MicrovmMachineState,
> + powerdown_req);
> +
> + if (mms->acpi_dev) {
> + Object *obj = OBJECT(mms->acpi_dev);
> + AcpiDeviceIfClass *adevc = ACPI_DEVICE_IF_GET_CLASS(obj);
> + adevc->send_event(mms->acpi_dev, ACPI_POWER_DOWN_STATUS);
> + }
> +}
> +
> static void microvm_machine_initfn(Object *obj)
> {
> MicrovmMachineState *mms = MICROVM_MACHINE(obj);
> @@ -452,6 +487,11 @@ static void microvm_machine_initfn(Object *obj)
>
> /* State */
> mms->kernel_cmdline_fixed = false;
> +
> + mms->machine_done.notify = microvm_machine_done;
> + qemu_add_machine_init_done_notifier(&mms->machine_done);
> + mms->powerdown_req.notify = microvm_powerdown_req;
> + qemu_register_powerdown_notifier(&mms->powerdown_req);
> }
>
> static void microvm_class_init(ObjectClass *oc, void *data)
> diff --git a/hw/i386/Kconfig b/hw/i386/Kconfig
> index c93f32f6579d..be746bcb49eb 100644
> --- a/hw/i386/Kconfig
> +++ b/hw/i386/Kconfig
> @@ -102,6 +102,7 @@ config MICROVM
> select I8259
> select MC146818RTC
> select VIRTIO_MMIO
> + select ACPI_HW_REDUCED
>
> config X86_IOMMU
> bool
> diff --git a/hw/i386/Makefile.objs b/hw/i386/Makefile.objs
> index 622739305882..bbb2fe78f3cd 100644
> --- a/hw/i386/Makefile.objs
> +++ b/hw/i386/Makefile.objs
> @@ -19,3 +19,4 @@ obj-y += kvmvapic.o
> obj-$(CONFIG_ACPI) += acpi-common.o
> obj-$(CONFIG_ACPI_HW_REDUCED) += generic_event_device_x86.o
> obj-$(CONFIG_PC) += acpi-build.o
> +obj-$(CONFIG_MICROVM) += acpi-microvm.o
> --
> 2.18.4
- [PATCH v5 00/20] microvm: add acpi support, Gerd Hoffmann, 2020/07/07
- [PATCH v5 01/20] microvm: name qboot binary qboot.rom, Gerd Hoffmann, 2020/07/07
- [PATCH v5 06/20] acpi: move acpi_dsdt_add_power_button() to ged, Gerd Hoffmann, 2020/07/07
- [PATCH v5 05/20] acpi: ged: add x86 device variant., Gerd Hoffmann, 2020/07/07
- [PATCH v5 04/20] acpi: ged: add control regs, Gerd Hoffmann, 2020/07/07
- [PATCH v5 02/20] seabios: add microvm config, update build rules, Gerd Hoffmann, 2020/07/07
- [PATCH v5 08/20] microvm/acpi: add minimal acpi support, Gerd Hoffmann, 2020/07/07
- Re: [PATCH v5 08/20] microvm/acpi: add minimal acpi support,
Michael S. Tsirkin <=
[PATCH v5 03/20] seabios: add bios-microvm.bin binary, Gerd Hoffmann, 2020/07/07
[PATCH v5 14/20] x86: move acpi_dev from pc/microvm, Gerd Hoffmann, 2020/07/07
[PATCH v5 20/20] tests/acpi: update expected data files for microvm, Gerd Hoffmann, 2020/07/07
[PATCH v5 07/20] microvm: make virtio irq base runtime configurable, Gerd Hoffmann, 2020/07/07
[PATCH v5 17/20] tests/acpi: allow microvm test data updates., Gerd Hoffmann, 2020/07/07
[PATCH v5 19/20] tests/acpi: add microvm test, Gerd Hoffmann, 2020/07/07