qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [PATCH 1/2] hw/misc/pca9552: Trace LED On/Off events


From: Philippe Mathieu-Daudé
Subject: Re: [PATCH 1/2] hw/misc/pca9552: Trace LED On/Off events
Date: Tue, 16 Jun 2020 20:05:53 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:68.0) Gecko/20100101 Thunderbird/68.5.0

On 6/16/20 7:15 PM, Cédric Le Goater wrote:
> After a closer look,
> 
>>> @@ -45,9 +46,15 @@ static void pca9552_update_pin_input(PCA9552State *s)
>>>          switch (config) {
>>>          case PCA9552_LED_ON:
>>>              s->regs[input_reg] |= 1 << input_shift;
>>> +            if (input_shift < s->nr_leds) {
> This seems like a superfluous test.

Indeed.

> 
>>> +                trace_pca9552_led_set(input_shift, true);
> 
> This should be using 'i' and the output is not very concise : 
> 
> 564609@1592326881.815616:pca9552_led_set LED#0 state:1
> 564609@1592326881.815660:pca9552_led_set LED#1 state:1
> 564609@1592326881.815669:pca9552_led_set LED#2 state:1
> 564609@1592326881.815677:pca9552_led_set LED#3 state:1
> 564609@1592326881.815706:pca9552_led_set LED#4 state:0
> 564609@1592326881.815715:pca9552_led_set LED#5 state:0
> 564609@1592326881.815727:pca9552_led_set LED#6 state:0
> 564609@1592326881.815740:pca9552_led_set LED#7 state:0
> 564609@1592326881.815748:pca9552_led_set LED#8 state:0
> 564609@1592326881.815759:pca9552_led_set LED#9 state:0
> 564609@1592326881.815767:pca9552_led_set LED#10 state:0
> 564609@1592326881.815779:pca9552_led_set LED#11 state:0
> 564609@1592326881.815790:pca9552_led_set LED#12 state:0
> 564609@1592326881.815802:pca9552_led_set LED#13 state:1
> 564609@1592326881.815813:pca9552_led_set LED#14 state:1
> 564609@1592326881.815826:pca9552_led_set LED#15 state:1
> 
> I would instead simply dump the contents of the PCA9552_INPUT registers : 
> 
> LEDS = 1111000000000101
> LEDS = 1111000000000111
> ....

Good idea, thanks!

> 
> C.
> 
> 
>>> +            }
>>>              break;
>>>          case PCA9552_LED_OFF:
>>>              s->regs[input_reg] &= ~(1 << input_shift);
>>> +            if (input_shift < s->nr_leds) {
>>> +                trace_pca9552_led_set(input_shift, false);
>>> +            }
>>>              break;
>>>          case PCA9552_LED_PWM0:
>>>          case PCA9552_LED_PWM1:
>>> diff --git a/hw/misc/trace-events b/hw/misc/trace-events
>>> index 5561746866..ed80d0d1be 100644
>>> --- a/hw/misc/trace-events
>>> +++ b/hw/misc/trace-events
>>> @@ -206,3 +206,6 @@ via1_rtc_cmd_pram_sect_write(int sector, int offset, 
>>> int addr, int value) "secto
>>>  # grlib_ahb_apb_pnp.c
>>>  grlib_ahb_pnp_read(uint64_t addr, uint32_t value) "AHB PnP read 
>>> addr:0x%03"PRIx64" data:0x%08x"
>>>  grlib_apb_pnp_read(uint64_t addr, uint32_t value) "APB PnP read 
>>> addr:0x%03"PRIx64" data:0x%08x"
>>> +
>>> +# pca9552.c
>>> +pca9552_led_set(unsigned id, bool state) "LED#%d state:%u"
>>>
>>
> 
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]