[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PATCH v2 2/3] hw/arm/fsl-imx6ul: Wire up USB controllers
From: |
Guenter Roeck |
Subject: |
Re: [PATCH v2 2/3] hw/arm/fsl-imx6ul: Wire up USB controllers |
Date: |
Thu, 12 Mar 2020 09:55:11 -0700 |
User-agent: |
Mutt/1.9.4 (2018-02-28) |
On Thu, Mar 12, 2020 at 01:19:41PM +0000, Peter Maydell wrote:
> On Tue, 10 Mar 2020 at 21:04, Guenter Roeck <address@hidden> wrote:
> >
> > IMX6UL USB controllers are quite similar to IMX7 USB controllers.
> > Wire them up the same way.
> >
> > The only real difference is that wiring up phy devices is necessary
> > to avoid phy reset timeouts in the Linux kernel.
> >
> > Signed-off-by: Guenter Roeck <address@hidden>
> > ---
> > v2: Use USB PHY emulation
> >
> > hw/arm/fsl-imx6ul.c | 33 +++++++++++++++++++++++++++++++++
> > include/hw/arm/fsl-imx6ul.h | 9 +++++++++
> > 2 files changed, 42 insertions(+)
> >
> > diff --git a/hw/arm/fsl-imx6ul.c b/hw/arm/fsl-imx6ul.c
> > @@ -456,6 +467,28 @@ static void fsl_imx6ul_realize(DeviceState *dev, Error
> > **errp)
> >
> > FSL_IMX6UL_ENETn_TIMER_IRQ[i]));
> > }
> >
> > + /* USB */
> > + for (i = 0; i < FSL_IMX6UL_NUM_USBS; i++) {
> > + static const int FSL_IMX6UL_USBn_IRQ[] = {
> > + FSL_IMX6UL_USB2_IRQ,
> > + FSL_IMX6UL_USB1_IRQ,
> > + };
>
> Do we really want to wire up USB1 to USB2_IRQ and USB2 to USB1_IRQ ?
> If so, a comment explaining that it is deliberate would be useful.
>
Yes. I think the definitions may be incorrect (or the Linux dts files are
incorrect, but that seems unlikely). I tried the other way but then I get
unhandled interrupt errors when trying to access a USB flash drive.
> Side note: not used here, but in the header file we define:
> FSL_IMX6UL_USB1_IRQ = 42,
> FSL_IMX6UL_USB2_IRQ = 43,
> FSL_IMX6UL_USB_PHY1_IRQ = 44,
> FSL_IMX6UL_USB_PHY2_IRQ = 44,
>
> Is that last one correct, or a cut-n-paste error that should be "45" ?
>
>From Linux devicetree files:
usbphy1: usbphy@20c9000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020c9000 0x1000>;
interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
usbphy2: usbphy@20ca000 {
compatible = "fsl,imx6ul-usbphy", "fsl,imx23-usbphy";
reg = <0x020ca000 0x1000>;
interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
usbotg1: usb@2184000 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184000 0x200>;
interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
usbotg2: usb@2184200 {
compatible = "fsl,imx6ul-usb", "fsl,imx27-usb";
reg = <0x02184200 0x200>;
interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
Should I maybe fix the definitions in a separate patch ?
Thanks,
Guenter
[PATCH v2 3/3] hw/arm/fsl-imx6: Wire up USB controllers, Guenter Roeck, 2020/03/10
Re: [PATCH v2 0/3] Wire up USB controllers in i.MX6 emulations, no-reply, 2020/03/10