Hey Philippe,
Very nice to see that the Raspberry 1 will be supported again, thanks
for contributing this!
I tried to bring up the machine using raspbian 2019-09-26. It ran
throught the early kernel initialisation
but for me it gets stuck at this point:
./arm-softmmu/qemu-system-arm -M raspi1b -kernel
$HOME/raspi/boot/kernel.img -append 'printk.time=0
earlycon=pl011,0x20201000 console=ttyAMA0 rootwait root=/dev/mmcblk0p2' \
-dtb $HOME/raspi/boot/bcm2708-rpi-b-plus.dtb -m 512 -sd
$HOME/raspi/2019-09-26-raspbian-buster-lite.img -serial stdio -s
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.75+ (dom@buildbot) (gcc version 4.9.3
(crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1270 Tue Sep 24
18:38:54 BST 2019
[ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7
(ARMv7), cr=00c5387d
[ 0.000000] CPU: VIPT aliasing data cache, unknown instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B+
[ 0.000000] earlycon: pl11 at MMIO 0x20201000 (options '')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 8 MiB at 0x1b800000
[ 0.000000] random: get_random_bytes called from
start_kernel+0x8c/0x49c with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 113680
[ 0.000000] Kernel command line: printk.time=0
earlycon=pl011,0x20201000 console=ttyAMA0 rootwait root=/dev/mmcblk0p2
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 434380K/458752K available (6973K kernel code, 635K rwdata, 2080K
rodata, 464K init, 797K bss, 16180K reserved, 8192K cma-reserved)
Virtual kernel memory layout:
vector : 0xffff0000 - 0xffff1000 ( 4 kB)
fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
vmalloc : 0xdc800000 - 0xff800000 ( 560 MB)
lowmem : 0xc0000000 - 0xdc000000 ( 448 MB)
modules : 0xbf000000 - 0xc0000000 ( 16 MB)
.text : 0x(ptrval) - 0x(ptrval) (6975 kB)
.init : 0x(ptrval) - 0x(ptrval) ( 464 kB)
.data : 0x(ptrval) - 0x(ptrval) ( 636 kB)
.bss : 0x(ptrval) - 0x(ptrval) ( 798 kB)
SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
ftrace: allocating 25197 entries in 74 pages
NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every
2147483647500ns
clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff,
max_idle_ns: 1911260446275 ns
bcm2835: system timer (irq = 27)
Console: colour dummy device 80x30
Maybe it should switch to the graphical console here, but I dont see the
boot splash logo either (when using -stdio instead of -nographic).
With -M raspi2 and -dtb bcm2709-rpi-2-b.dtb the same raspbian image can
fully boot to the login console.
Regards,
Niek
On Mon, Feb 17, 2020 at 12:51 PM Philippe Mathieu-Daudé <address@hidden
<mailto:address@hidden>> wrote:
$ qemu-system-arm -M raspi1b -serial stdio \
-kernel raspberrypi/firmware/boot/kernel.img \
-dtb raspberrypi/firmware/boot/bcm2708-rpi-b.dtb \
-append 'printk.time=0 earlycon=pl011,0x20201000 console=ttyAMA0'
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.69+ (dom@buildbot) (gcc version
4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1261 Tue Sep
3 20:21:01 BST 2019
[ 0.000000] CPU: ARMv6-compatible processor [410fb767]
revision 7 (ARMv7), cr=00c5387d
[ 0.000000] CPU: VIPT aliasing data cache, unknown instruction
cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B
[ 0.000000] earlycon: pl11 at MMIO 0x20201000 (options '')
[ 0.000000] bootconsole [pl11] enabled
[ 0.000000] Memory policy: Data cache writeback
[ 0.000000] cma: Reserved 8 MiB at 0x1b800000
[ 0.000000] random: get_random_bytes called from
start_kernel+0x8c/0x49c with crng_init=0
[ 0.000000] Built 1 zonelists, mobility grouping on. Total
pages: 113680
[ 0.000000] Kernel command line: printk.time=0
earlycon=pl011,0x20201000 console=ttyAMA0
Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
Memory: 434380K/458752K available (6971K kernel code, 635K
rwdata, 2080K rodata, 464K init, 797K bss, 16180K reserved, 8192K
cma-reserved)
...
Signed-off-by: Philippe Mathieu-Daudé <address@hidden
<mailto:address@hidden>>
---
hw/arm/raspi.c | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/hw/arm/raspi.c b/hw/arm/raspi.c
index 3537a329ac..2d9f4e3085 100644
--- a/hw/arm/raspi.c
+++ b/hw/arm/raspi.c
@@ -324,6 +324,15 @@ static void
raspi_machine_class_common_init(MachineClass *mc,
mc->default_ram_size = board_ram_size(board_rev);
};
+static void raspi1b_machine_class_init(ObjectClass *oc, void *data)
+{
+ MachineClass *mc = MACHINE_CLASS(oc);
+ RaspiMachineClass *rmc = RASPI_MACHINE_CLASS(oc);
+
+ rmc->board_rev = 0x900032;
+ raspi_machine_class_common_init(mc, rmc->board_rev);
+};
+
static void raspi2b_machine_class_init(ObjectClass *oc, void *data)
{
MachineClass *mc = MACHINE_CLASS(oc);
@@ -348,6 +357,10 @@ static void
raspi3b_machine_class_init(ObjectClass *oc, void *data)
static const TypeInfo raspi_machine_types[] = {
{
+ .name = MACHINE_TYPE_NAME("raspi1b"),
+ .parent = TYPE_RASPI_MACHINE,
+ .class_init = raspi1b_machine_class_init,
+ }, {
.name = MACHINE_TYPE_NAME("raspi2b"),
.parent = TYPE_RASPI_MACHINE,
.class_init = raspi2b_machine_class_init,
--
2.21.1
--
Niek Linnenbank