Re: [PATCH 2/4] aspeed/scu: Fix W1C behavior

[Cédric Le Goater]

On 12/11/2019 07:40, Joel Stanley wrote:
> This models the clock write one to clear registers, and fixes up some
> incorrect behavior in all of the write to clear registers.
> 
> There was also a typo in one of the register definitions.
> 
> Signed-off-by: Joel Stanley <address@hidden>


Reviewed-by: Cédric Le Goater <address@hidden>

> ---
>  hw/misc/aspeed_scu.c | 11 ++++++++---
>  1 file changed, 8 insertions(+), 3 deletions(-)
> 
> diff --git a/hw/misc/aspeed_scu.c b/hw/misc/aspeed_scu.c
> index 717509bc5460..aac4645f8c3c 100644
> --- a/hw/misc/aspeed_scu.c
> +++ b/hw/misc/aspeed_scu.c
> @@ -98,7 +98,7 @@
>  #define AST2600_CLK_STOP_CTRL     TO_REG(0x80)
>  #define AST2600_CLK_STOP_CTRL_CLR TO_REG(0x84)
>  #define AST2600_CLK_STOP_CTRL2     TO_REG(0x90)
> -#define AST2600_CLK_STOP_CTR2L_CLR TO_REG(0x94)
> +#define AST2600_CLK_STOP_CTRL2_CLR TO_REG(0x94)
>  #define AST2600_SDRAM_HANDSHAKE   TO_REG(0x100)
>  #define AST2600_HPLL_PARAM        TO_REG(0x200)
>  #define AST2600_HPLL_EXT          TO_REG(0x204)
> @@ -532,11 +532,12 @@ static uint64_t aspeed_ast2600_scu_read(void *opaque, 
> hwaddr offset,
>      return s->regs[reg];
>  }
>  
> -static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t 
> data,
> +static void aspeed_ast2600_scu_write(void *opaque, hwaddr offset, uint64_t 
> data64,
>                                       unsigned size)
>  {
>      AspeedSCUState *s = ASPEED_SCU(opaque);
>      int reg = TO_REG(offset);
> +    uint32_t data = data64;
>  
>      if (reg >= ASPEED_AST2600_SCU_NR_REGS) {
>          qemu_log_mask(LOG_GUEST_ERROR,
> @@ -563,15 +564,19 @@ static void aspeed_ast2600_scu_write(void *opaque, 
> hwaddr offset, uint64_t data,
>          /* fall through */
>      case AST2600_SYS_RST_CTRL:
>      case AST2600_SYS_RST_CTRL2:
> +    case AST2600_CLK_STOP_CTRL:
> +    case AST2600_CLK_STOP_CTRL2:
>          /* W1S (Write 1 to set) registers */
>          s->regs[reg] |= data;
>          return;
>      case AST2600_SYS_RST_CTRL_CLR:
>      case AST2600_SYS_RST_CTRL2_CLR:
> +    case AST2600_CLK_STOP_CTRL_CLR:
> +    case AST2600_CLK_STOP_CTRL2_CLR:
>      case AST2600_HW_STRAP1_CLR:
>      case AST2600_HW_STRAP2_CLR:
>          /* W1C (Write 1 to clear) registers */
> -        s->regs[reg] &= ~data;
> +        s->regs[reg - 1] &= ~data;
>          return;
>  
>      case AST2600_RNG_DATA:
>