Re: [PATCH] net/cadence_gem: Set PHY autonegotiation restart status

[Alistair Francis]

On Mon, Nov 4, 2019 at 2:02 PM <address@hidden> wrote:
>
> From: Linus Ziegert <address@hidden>
>
> The Linux kernel PHY driver sets AN_RESTART in the BMCR of the
> PHY when autonegotiation is started.
> Recently the kernel started to read back the PHY's AN_RESTART
> bit and now checks whether the autonegotiation is complete and
> the bit was cleared [1]. Otherwise the link status is down.
>
> The emulated PHY needs to clear AN_RESTART immediately to inform
> the kernel driver about the completion of autonegotiation phase.
>
> [1] 
> https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=c36757eb9dee
>
> Signed-off-by: Linus Ziegert <address@hidden>

Reviewed-by: Alistair Francis <address@hidden>

Alistair

> ---
>  hw/net/cadence_gem.c | 9 +++++----
>  1 file changed, 5 insertions(+), 4 deletions(-)
>
> diff --git a/hw/net/cadence_gem.c b/hw/net/cadence_gem.c
> index 7f9cb5ab95..b8be73dc55 100644
> --- a/hw/net/cadence_gem.c
> +++ b/hw/net/cadence_gem.c
> @@ -271,9 +271,10 @@
>  #define PHY_REG_EXT_PHYSPCFC_ST   27
>  #define PHY_REG_CABLE_DIAG   28
>
> -#define PHY_REG_CONTROL_RST  0x8000
> -#define PHY_REG_CONTROL_LOOP 0x4000
> -#define PHY_REG_CONTROL_ANEG 0x1000
> +#define PHY_REG_CONTROL_RST       0x8000
> +#define PHY_REG_CONTROL_LOOP      0x4000
> +#define PHY_REG_CONTROL_ANEG      0x1000
> +#define PHY_REG_CONTROL_ANRESTART 0x0200
>
>  #define PHY_REG_STATUS_LINK     0x0004
>  #define PHY_REG_STATUS_ANEGCMPL 0x0020
> @@ -1345,7 +1346,7 @@ static void gem_phy_write(CadenceGEMState *s, unsigned 
> reg_num, uint16_t val)
>          }
>          if (val & PHY_REG_CONTROL_ANEG) {
>              /* Complete autonegotiation immediately */
> -            val &= ~PHY_REG_CONTROL_ANEG;
> +            val &= ~(PHY_REG_CONTROL_ANEG | PHY_REG_CONTROL_ANRESTART);
>              s->phy_regs[PHY_REG_STATUS] |= PHY_REG_STATUS_ANEGCMPL;
>          }
>          if (val & PHY_REG_CONTROL_LOOP) {
> --
> 2.21.0
>
>