qemu-arm
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-arm] [PATCH v2 5/8] hw/core: Add a config switch for the "or-i


From: Philippe Mathieu-Daudé
Subject: Re: [Qemu-arm] [PATCH v2 5/8] hw/core: Add a config switch for the "or-irq" device
Date: Wed, 31 Jul 2019 17:50:39 +0200
User-agent: Mozilla/5.0 (X11; Linux x86_64; rv:60.0) Gecko/20100101 Thunderbird/60.7.0

On 7/31/19 9:56 AM, Thomas Huth wrote:
> The "or-irq" device is only used by certain machines. Let's add
> a proper config switch for it so that it only gets compiled when we
> really need it.
> 
> Signed-off-by: Thomas Huth <address@hidden>

Reviewed-by: Philippe Mathieu-Daudé <address@hidden>

> ---
>  hw/arm/Kconfig        | 3 +++
>  hw/core/Kconfig       | 3 +++
>  hw/core/Makefile.objs | 2 +-
>  hw/pci-host/Kconfig   | 3 ++-
>  4 files changed, 9 insertions(+), 2 deletions(-)
> 
> diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig
> index ab65ecd216..849195c3f6 100644
> --- a/hw/arm/Kconfig
> +++ b/hw/arm/Kconfig
> @@ -292,6 +292,7 @@ config RASPI
>  config STM32F205_SOC
>      bool
>      select ARM_V7M
> +    select OR_IRQ
>      select STM32F2XX_TIMER
>      select STM32F2XX_USART
>      select STM32F2XX_SYSCFG
> @@ -360,6 +361,7 @@ config MPS2
>      select LAN9118
>      select MPS2_FPGAIO
>      select MPS2_SCC
> +    select OR_IRQ
>      select PL022    # Serial port
>      select PL080    # DMA controller
>  
> @@ -439,6 +441,7 @@ config ARMSSE
>      select IOTKIT_SECCTL
>      select IOTKIT_SYSCTL
>      select IOTKIT_SYSINFO
> +    select OR_IRQ
>      select TZ_MPC
>      select TZ_MSC
>      select TZ_PPC
> diff --git a/hw/core/Kconfig b/hw/core/Kconfig
> index d11920fcb3..984143456a 100644
> --- a/hw/core/Kconfig
> +++ b/hw/core/Kconfig
> @@ -7,6 +7,9 @@ config PTIMER
>  config FITLOADER
>      bool
>  
> +config OR_IRQ
> +    bool
> +
>  config PLATFORM_BUS
>      bool
>  
> diff --git a/hw/core/Makefile.objs b/hw/core/Makefile.objs
> index d6cfb2a81b..ce337bd7c9 100644
> --- a/hw/core/Makefile.objs
> +++ b/hw/core/Makefile.objs
> @@ -18,7 +18,7 @@ common-obj-$(CONFIG_SOFTMMU) += loader.o
>  common-obj-$(CONFIG_FITLOADER) += loader-fit.o
>  common-obj-$(CONFIG_SOFTMMU) += qdev-properties-system.o
>  common-obj-$(CONFIG_REGISTER) += register.o
> -common-obj-$(CONFIG_SOFTMMU) += or-irq.o
> +common-obj-$(CONFIG_OR_IRQ) += or-irq.o
>  common-obj-$(CONFIG_SOFTMMU) += split-irq.o
>  common-obj-$(CONFIG_PLATFORM_BUS) += platform-bus.o
>  common-obj-$(CONFIG_SOFTMMU) += generic-loader.o
> diff --git a/hw/pci-host/Kconfig b/hw/pci-host/Kconfig
> index 8c16d96b3f..1edc1a31d4 100644
> --- a/hw/pci-host/Kconfig
> +++ b/hw/pci-host/Kconfig
> @@ -2,8 +2,9 @@ config PAM
>      bool
>  
>  config PREP_PCI
> -    select PCI
>      bool
> +    select PCI
> +    select OR_IRQ
>  
>  config GRACKLE_PCI
>      select PCI
> 



reply via email to

[Prev in Thread] Current Thread [Next in Thread]