[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [PATCH v5 4/8] hw/arm/virt: Add memory hotplug framework
From: |
Shameerali Kolothum Thodi |
Subject: |
Re: [Qemu-arm] [PATCH v5 4/8] hw/arm/virt: Add memory hotplug framework |
Date: |
Wed, 19 Jun 2019 08:16:15 +0000 |
Hi Eric,
> -----Original Message-----
> From: Auger Eric [mailto:address@hidden]
> Sent: 18 June 2019 13:42
> To: Shameerali Kolothum Thodi <address@hidden>;
> address@hidden; address@hidden; address@hidden
> Cc: address@hidden; address@hidden;
> address@hidden; address@hidden; xuwei (O)
> <address@hidden>; address@hidden; address@hidden;
> Linuxarm <address@hidden>
> Subject: Re: [PATCH v5 4/8] hw/arm/virt: Add memory hotplug framework
>
> Hi Shameer,
>
> On 5/22/19 6:22 PM, Shameer Kolothum wrote:
> > From: Eric Auger <address@hidden>
> >
> > This patch adds the memory hot-plug/hot-unplug infrastructure in
> > machvirt. The device memory is not yet exposed to the Guest either
> > through DT or ACPI and hence both cold/hot plug of memory is
> > explicitly disabled for now.
> >
> > Signed-off-by: Eric Auger <address@hidden>
> > Signed-off-by: Kwangwoo Lee <address@hidden>
> > Signed-off-by: Shameer Kolothum <address@hidden>
> > ---
> > hw/arm/Kconfig | 2 ++
> > hw/arm/virt.c | 51
> > +++++++++++++++++++++++++++++++++++++++++++++++++-
> > 2 files changed, 52 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/arm/Kconfig b/hw/arm/Kconfig index
> > af8cffde9c..6ef22439b5 100644
> > --- a/hw/arm/Kconfig
> > +++ b/hw/arm/Kconfig
> > @@ -19,6 +19,8 @@ config ARM_VIRT
> > select PLATFORM_BUS
> > select SMBIOS
> > select VIRTIO_MMIO
> small conflict to be resolved here after addition of "select ACPI_PCI".
Ok. I will address that in next revision.
Thanks,
Shameer
> > + select MEM_DEVICE
> > + select DIMM
> >
> > config CHEETAH
> > bool
> > diff --git a/hw/arm/virt.c b/hw/arm/virt.c index
> > 5331ab71e2..3df8c389ff 100644
> > --- a/hw/arm/virt.c
> > +++ b/hw/arm/virt.c
> > @@ -62,6 +62,8 @@
> > #include "hw/arm/smmuv3.h"
> > #include "hw/acpi/acpi.h"
> > #include "target/arm/internals.h"
> > +#include "hw/mem/pc-dimm.h"
> > +#include "hw/mem/nvdimm.h">
> > #define DEFINE_VIRT_MACHINE_LATEST(major, minor, latest) \
> > static void virt_##major##_##minor##_class_init(ObjectClass *oc,
> > \ @@ -1862,6 +1864,40 @@ static const CPUArchIdList
> *virt_possible_cpu_arch_ids(MachineState *ms)
> > return ms->possible_cpus;
> > }
> >
> > +static void virt_memory_pre_plug(HotplugHandler *hotplug_dev,
> DeviceState *dev,
> > + Error **errp) {
> > +
> > + /*
> > + * The device memory is not yet exposed to the Guest either through>
> + * DT or ACPI and hence both cold/hot plug of memory is explicitly
> > + * disabled for now.
> > + */
> > + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > + error_setg(errp, "memory cold/hot plug is not yet supported");
> > + return;
> > + }
> > +
> > + pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), NULL,
> errp);
> > +}
> > +
> > +static void virt_memory_plug(HotplugHandler *hotplug_dev,
> > + DeviceState *dev, Error **errp) {
> > + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> > +
> > + pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), NULL);
> > +
> > +}
> > +
> > +static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
> > + DeviceState *dev,
> Error
> > +**errp) {
> > + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > + virt_memory_pre_plug(hotplug_dev, dev, errp);
> > + }
> > +}
> > +
> > static void virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
> > DeviceState *dev, Error
> > **errp) { @@ -1873,12 +1909,23 @@ static void
> > virt_machine_device_plug_cb(HotplugHandler *hotplug_dev,
> > SYS_BUS_DEVICE(dev));
> > }
> > }
> > + if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> > + virt_memory_plug(hotplug_dev, dev, errp);
> > + }
> > +}
> > +
> > +static void virt_machine_device_unplug_request_cb(HotplugHandler
> *hotplug_dev,
> > + DeviceState *dev, Error
> > +**errp) {
> > + error_setg(errp, "device unplug request for unsupported device"
> > + " type: %s", object_get_typename(OBJECT(dev)));
> > }
> >
> > static HotplugHandler *virt_machine_get_hotplug_handler(MachineState
> *machine,
> >
> DeviceState
> > *dev) {
> > - if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE)) {
> > + if (object_dynamic_cast(OBJECT(dev), TYPE_SYS_BUS_DEVICE) ||
> > + (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM))) {
> > return HOTPLUG_HANDLER(machine);
> > }
> >
> > @@ -1942,7 +1989,9 @@ static void virt_machine_class_init(ObjectClass
> *oc, void *data)
> > mc->kvm_type = virt_kvm_type;
> > assert(!mc->get_hotplug_handler);
> > mc->get_hotplug_handler = virt_machine_get_hotplug_handler;
> > + hc->pre_plug = virt_machine_device_pre_plug_cb;
> > hc->plug = virt_machine_device_plug_cb;
> > + hc->unplug_request = virt_machine_device_unplug_request_cb;
> > }
> >
> > static void virt_instance_init(Object *obj)
> >
> Thanks
>
> Eric