[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [Qemu-devel] [PATCH v4 5/8] hw/arm/virt: Enable device me
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-arm] [Qemu-devel] [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot |
Date: |
Thu, 9 May 2019 17:20:02 +0200 |
On Tue, 9 Apr 2019 11:29:32 +0100
Shameer Kolothum <address@hidden> wrote:
> This initializes the GED device with base memory and irq, configures
> ged memory hotplug event and builds the corresponding aml code. GED
> irq routing to Guest is also enabled. With this, both hot and cold
> plug of device memory is enabled now for Guest with ACPI boot.
>
> Memory cold plug support with Guest DT boot is not yet supported.
>
> Signed-off-by: Shameer Kolothum <address@hidden>
> ---
> default-configs/arm-softmmu.mak | 2 ++
> hw/arm/virt-acpi-build.c | 9 ++++++
> hw/arm/virt.c | 61
> +++++++++++++++++++++++++++++++++++++++--
> include/hw/arm/virt.h | 4 +++
> 4 files changed, 73 insertions(+), 3 deletions(-)
>
> diff --git a/default-configs/arm-softmmu.mak b/default-configs/arm-softmmu.mak
> index 9f4b803..c9a9b34 100644
> --- a/default-configs/arm-softmmu.mak
> +++ b/default-configs/arm-softmmu.mak
> @@ -163,3 +163,5 @@ CONFIG_LSI_SCSI_PCI=y
>
> CONFIG_MEM_DEVICE=y
> CONFIG_DIMM=y
> +CONFIG_ACPI_MEMORY_HOTPLUG=y
> +CONFIG_ACPI_HW_REDUCED=y
> diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> index bf9c0bc..1ad394b 100644
> --- a/hw/arm/virt-acpi-build.c
> +++ b/hw/arm/virt-acpi-build.c
> @@ -40,6 +40,8 @@
> #include "hw/loader.h"
> #include "hw/hw.h"
> #include "hw/acpi/aml-build.h"
> +#include "hw/acpi/memory_hotplug.h"
> +#include "hw/acpi/generic_event_device.h"
> #include "hw/pci/pcie_host.h"
> #include "hw/pci/pci.h"
> #include "hw/arm/virt.h"
> @@ -727,6 +729,7 @@ static void
> build_dsdt(GArray *table_data, BIOSLinker *linker, VirtMachineState *vms)
> {
> Aml *scope, *dsdt;
> + MachineState *ms = MACHINE(vms);
> const MemMapEntry *memmap = vms->memmap;
> const int *irqmap = vms->irqmap;
>
> @@ -753,6 +756,12 @@ build_dsdt(GArray *table_data, BIOSLinker *linker,
> VirtMachineState *vms)
> (irqmap[VIRT_GPIO] + ARM_SPI_BASE));
> acpi_dsdt_add_power_button(scope);
>
> + build_ged_aml(scope, "\\_SB."GED_DEVICE, HOTPLUG_HANDLER(vms->acpi_dev),
> + irqmap[VIRT_ACPI_GED] + ARM_SPI_BASE, AML_SYSTEM_MEMORY);
> +
> + build_memory_hotplug_aml(scope, ms->ram_slots, "\\_SB", NULL,
> + AML_SYSTEM_MEMORY);
>
are you sure we should add these parts if acpi_device not present or
ms->ram_slots == 0 ?
> aml_append(dsdt, scope);
>
> /* copy AML table into ACPI tables blob and patch header there */
[...]
> +
> static void create_gic(VirtMachineState *vms, qemu_irq *pic)
> {
> /* We create a standalone GIC */
> @@ -670,6 +707,8 @@ static void create_gic(VirtMachineState *vms, qemu_irq
> *pic)
> pic[i] = qdev_get_gpio_in(gicdev, i);
> }
>
> + vms->gsi = qemu_allocate_irqs(virt_gsi_handler, pic, NUM_IRQS);
Why do we need this "gsi" to begin with?
> +
> fdt_add_gic_node(vms);
>
> if (type == 3 && vms->its) {
> @@ -1418,7 +1457,7 @@ static void machvirt_init(MachineState *machine)
> VirtMachineClass *vmc = VIRT_MACHINE_GET_CLASS(machine);
> MachineClass *mc = MACHINE_GET_CLASS(machine);
> const CPUArchIdList *possible_cpus;
> - qemu_irq pic[NUM_IRQS];
> + qemu_irq *pic;
> MemoryRegion *sysmem = get_system_memory();
> MemoryRegion *secure_sysmem = NULL;
> int n, virt_max_cpus;
> @@ -1614,6 +1653,7 @@ static void machvirt_init(MachineState *machine)
>
> create_flash(vms, sysmem, secure_sysmem ? secure_sysmem : sysmem);
>
> + pic = g_new0(qemu_irq, NUM_IRQS);
> create_gic(vms, pic);
>
> fdt_add_pmu_nodes(vms);
> @@ -1644,6 +1684,8 @@ static void machvirt_init(MachineState *machine)
>
> create_platform_bus(vms, pic);
>
> + vms->acpi_dev = create_acpi_ged(vms);
what if we start QEMU with -no-acpi?
> vms->bootinfo.ram_size = machine->ram_size;
> vms->bootinfo.kernel_filename = machine->kernel_filename;
> vms->bootinfo.kernel_cmdline = machine->kernel_cmdline;
> @@ -1811,21 +1853,34 @@ static const CPUArchIdList
> *virt_possible_cpu_arch_ids(MachineState *ms)
> static void virt_memory_pre_plug(HotplugHandler *hotplug_dev, DeviceState
> *dev,
> Error **errp)
> {
> - if (object_dynamic_cast(OBJECT(dev), TYPE_PC_DIMM)) {
> - error_setg(errp, "memory cold/hot plug is not yet supported");
> + VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
> + const bool is_nvdimm = object_dynamic_cast(OBJECT(dev), TYPE_NVDIMM);
> +
> + if (is_nvdimm) {
> + error_setg(errp, "nvdimm is not yet supported");
> return;
> }
>
> + if (!vms->acpi_dev) {
> + error_setg(errp, "memory hotplug is not enabled: missing acpi
> device");
> + return;
> + }
> +
> + hotplug_handler_pre_plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, errp);
> +
> pc_dimm_pre_plug(PC_DIMM(dev), MACHINE(hotplug_dev), NULL, errp);
> }
>
> static void virt_memory_plug(HotplugHandler *hotplug_dev,
> DeviceState *dev, Error **errp)
> {
> + HotplugHandlerClass *hhc;
> VirtMachineState *vms = VIRT_MACHINE(hotplug_dev);
>
> pc_dimm_plug(PC_DIMM(dev), MACHINE(vms), NULL);
>
> + hhc = HOTPLUG_HANDLER_GET_CLASS(vms->acpi_dev);
> + hhc->plug(HOTPLUG_HANDLER(vms->acpi_dev), dev, NULL);
> }
>
> static void virt_machine_device_pre_plug_cb(HotplugHandler *hotplug_dev,
> diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
> index 507517c..9c6b0b1 100644
> --- a/include/hw/arm/virt.h
> +++ b/include/hw/arm/virt.h
> @@ -77,6 +77,8 @@ enum {
> VIRT_GPIO,
> VIRT_SECURE_UART,
> VIRT_SECURE_MEM,
> + VIRT_PCDIMM_ACPI,
> + VIRT_ACPI_GED,
> VIRT_LOWMEMMAP_LAST,
> };
>
> @@ -132,6 +134,8 @@ typedef struct {
> uint32_t iommu_phandle;
> int psci_conduit;
> hwaddr highest_gpa;
> + DeviceState *acpi_dev;
> + qemu_irq *gsi;
> } VirtMachineState;
>
> #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- Re: [Qemu-arm] [Qemu-devel] [PATCH v4 5/8] hw/arm/virt: Enable device memory cold/hot plug with ACPI boot,
Igor Mammedov <=