[Qemu-arm] [PATCH v9 03/18] hw/arm/virt: Split the memory map description

[Eric Auger]

In the prospect to introduce an extended memory map supporting more
RAM, let's split the memory map array into two parts:

- the former a15memmap, renamed base_memmap, contains regions below
  and including the RAM. MemMapEntries initialized in this array
  have a static size and base address.
- extended_memmap, only initialized with entries located after the
  RAM. MemMapEntries initialized in this array only get their size
  initialized. Their base address is dynamically computed depending
  on the the top of the RAM, with same alignment as their size.

Eventually base_memmap entries are copied into the extended_memmap
array. Using two separate arrays however clarifies which entries
are statically allocated and those which are dynamically allocated.

This new split will allow to grow the RAM size without changing the
description of the high IO entries.

We introduce a new virt_set_memmap() helper function which
"freezes" the memory map. We call it in machvirt_init as
memory attributes of the machine are not yet set when
virt_instance_init() gets called.

The memory map is unchanged (the top of the initial RAM still is
256GiB). Then come the high IO regions with same layout as before.

Signed-off-by: Eric Auger <address@hidden>

---
v8 -> v9:
- restore virt_set_memmap call in machvirt_init as otherwise it does
  not work in TCG mode

v7 -> v8:
- removed Peter's R-b due to the changes induced by Igor's comments
- call set_memmap back in virt_instance_init
- add comments about sizing of extended_memmap
- s/region/entries as suggested by Igor
- rewording of the commit message

v6 -> v7:
- s/a15memmap/base_memmap
- slight rewording of the commit message
- add "if there is less than 256GiB of RAM then the floating area
  starts at the 256GiB mark" in the comment associated to the floating
  memory map
- Added Peter's R-b

v5 -> v6
- removal of many macros in units.h
- introduce the virt_set_memmap helper
- new computation for offsets of high IO regions
- add comments
---
 hw/arm/virt.c         | 51 ++++++++++++++++++++++++++++++++++++++-----
 include/hw/arm/virt.h | 14 ++++++++----
 2 files changed, 55 insertions(+), 10 deletions(-)

diff --git a/hw/arm/virt.c b/hw/arm/virt.c
index 892bae4f3a..8a23608d3e 100644
--- a/hw/arm/virt.c
+++ b/hw/arm/virt.c
@@ -29,6 +29,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/units.h"
 #include "qapi/error.h"
 #include "hw/sysbus.h"
 #include "hw/arm/arm.h"
@@ -121,7 +122,7 @@
  * Note that devices should generally be placed at multiples of 0x10000,
  * to accommodate guests using 64K pages.
  */
-static const MemMapEntry a15memmap[] = {
+static const MemMapEntry base_memmap[] = {
     /* Space up to 0x8000000 is reserved for a boot ROM */
     [VIRT_FLASH] =              {          0, 0x08000000 },
     [VIRT_CPUPERIPHS] =         { 0x08000000, 0x00020000 },
@@ -149,11 +150,24 @@ static const MemMapEntry a15memmap[] = {
     [VIRT_PCIE_PIO] =           { 0x3eff0000, 0x00010000 },
     [VIRT_PCIE_ECAM] =          { 0x3f000000, 0x01000000 },
     [VIRT_MEM] =                { 0x40000000, RAMLIMIT_BYTES },
+};
+
+/*
+ * Highmem IO Regions: This memory map is floating, located after the RAM.
+ * Each MemMapEntry base (GPA) will be dynamically computed, depending on the
+ * top of the RAM, so that its base get the same alignment as the size,
+ * ie. a 512GiB entry will be aligned on a 512GiB boundary. If there is
+ * less than 256GiB of RAM, the floating area starts at the 256GiB mark.
+ * Note the extended_memmap is sized so that it eventually also includes the
+ * base_memmap entries (VIRT_HIGH_GIC_REDIST2 index is greater than the last
+ * index of base_memmap).
+ */
+static MemMapEntry extended_memmap[] = {
     /* Additional 64 MB redist region (can contain up to 512 redistributors) */
-    [VIRT_HIGH_GIC_REDIST2] =   { 0x4000000000ULL, 0x4000000 },
-    [VIRT_HIGH_PCIE_ECAM] =     { 0x4010000000ULL, 0x10000000 },
-    /* Second PCIe window, 512GB wide at the 512GB boundary */
-    [VIRT_HIGH_PCIE_MMIO] =     { 0x8000000000ULL, 0x8000000000ULL },
+    [VIRT_HIGH_GIC_REDIST2] =   { 0x0, 64 * MiB },
+    [VIRT_HIGH_PCIE_ECAM] =     { 0x0, 256 * MiB },
+    /* Second PCIe window */
+    [VIRT_HIGH_PCIE_MMIO] =     { 0x0, 512 * GiB },
 };
 
 static const int a15irqmap[] = {
@@ -1354,6 +1368,30 @@ static uint64_t virt_cpu_mp_affinity(VirtMachineState 
*vms, int idx)
     return arm_cpu_mp_affinity(idx, clustersz);
 }
 
+static void virt_set_memmap(VirtMachineState *vms)
+{
+    hwaddr base;
+    int i;
+
+    vms->memmap = extended_memmap;
+
+    for (i = 0; i < ARRAY_SIZE(base_memmap); i++) {
+        vms->memmap[i] = base_memmap[i];
+    }
+
+    vms->high_io_base = 256 * GiB; /* Top of the legacy initial RAM region */
+    base = vms->high_io_base;
+
+    for (i = VIRT_LOWMEMMAP_LAST; i < ARRAY_SIZE(extended_memmap); i++) {
+        hwaddr size = extended_memmap[i].size;
+
+        base = ROUND_UP(base, size);
+        vms->memmap[i].base = base;
+        vms->memmap[i].size = size;
+        base += size;
+    }
+}
+
 static void machvirt_init(MachineState *machine)
 {
     VirtMachineState *vms = VIRT_MACHINE(machine);
@@ -1368,6 +1406,8 @@ static void machvirt_init(MachineState *machine)
     bool firmware_loaded = bios_name || drive_get(IF_PFLASH, 0, 0);
     bool aarch64 = true;
 
+    virt_set_memmap(vms);
+
     /* We can probe only here because during property set
      * KVM is not available yet
      */
@@ -1845,7 +1885,6 @@ static void virt_instance_init(Object *obj)
                                     "Valid values are none and smmuv3",
                                     NULL);
 
-    vms->memmap = a15memmap;
     vms->irqmap = a15irqmap;
 }
 
diff --git a/include/hw/arm/virt.h b/include/hw/arm/virt.h
index a27086d524..3dc7a6c5d5 100644
--- a/include/hw/arm/virt.h
+++ b/include/hw/arm/virt.h
@@ -64,7 +64,6 @@ enum {
     VIRT_GIC_VCPU,
     VIRT_GIC_ITS,
     VIRT_GIC_REDIST,
-    VIRT_HIGH_GIC_REDIST2,
     VIRT_SMMU,
     VIRT_UART,
     VIRT_MMIO,
@@ -74,12 +73,18 @@ enum {
     VIRT_PCIE_MMIO,
     VIRT_PCIE_PIO,
     VIRT_PCIE_ECAM,
-    VIRT_HIGH_PCIE_ECAM,
     VIRT_PLATFORM_BUS,
-    VIRT_HIGH_PCIE_MMIO,
     VIRT_GPIO,
     VIRT_SECURE_UART,
     VIRT_SECURE_MEM,
+    VIRT_LOWMEMMAP_LAST,
+};
+
+/* indices of IO regions located after the RAM */
+enum {
+    VIRT_HIGH_GIC_REDIST2 =  VIRT_LOWMEMMAP_LAST,
+    VIRT_HIGH_PCIE_ECAM,
+    VIRT_HIGH_PCIE_MMIO,
 };
 
 typedef enum VirtIOMMUType {
@@ -116,7 +121,7 @@ typedef struct {
     int32_t gic_version;
     VirtIOMMUType iommu;
     struct arm_boot_info bootinfo;
-    const MemMapEntry *memmap;
+    MemMapEntry *memmap;
     const int *irqmap;
     int smp_cpus;
     void *fdt;
@@ -126,6 +131,7 @@ typedef struct {
     uint32_t msi_phandle;
     uint32_t iommu_phandle;
     int psci_conduit;
+    hwaddr high_io_base;
 } VirtMachineState;
 
 #define VIRT_ECAM_ID(high) (high ? VIRT_HIGH_PCIE_ECAM : VIRT_PCIE_ECAM)
-- 
2.20.1