[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-arm] [Qemu-devel] [PATCH 4/8] hw: arm: Carry RSDP specific dat
From: |
Samuel Ortiz |
Subject: |
Re: [Qemu-arm] [Qemu-devel] [PATCH 4/8] hw: arm: Carry RSDP specific data through AcpiRsdpData |
Date: |
Wed, 28 Nov 2018 11:16:22 +0100 |
User-agent: |
Mutt/1.10.1 (2018-07-13) |
On Wed, Nov 28, 2018 at 10:46:41AM +0100, Samuel Ortiz wrote:
> On Tue, Nov 27, 2018 at 05:27:49PM +0100, Igor Mammedov wrote:
> > On Tue, 27 Nov 2018 16:42:18 +0100
> > Samuel Ortiz <address@hidden> wrote:
> >
> > > Hi Igor,
> > >
> > > On Tue, Nov 27, 2018 at 04:25:51PM +0100, Igor Mammedov wrote:
> > > > On Mon, 26 Nov 2018 17:29:37 +0100
> > > > Samuel Ortiz <address@hidden> wrote:
> > > >
> > > > > That will allow us to generalize the ARM build_rsdp() routine to
> > > > > support
> > > > > both legacy RSDP (The current i386 implementation) and extended RSDP
> > > > > (The ARM implementation).
> > > > >
> > > > > Signed-off-by: Samuel Ortiz <address@hidden>
> > > > > ---
> > > > > include/hw/acpi/acpi-defs.h | 11 +++++++++++
> > > > > hw/arm/virt-acpi-build.c | 27 ++++++++++++++++++++++-----
> > > > > 2 files changed, 33 insertions(+), 5 deletions(-)
> > > > >
> > > > > diff --git a/include/hw/acpi/acpi-defs.h b/include/hw/acpi/acpi-defs.h
> > > > > index af8e023968..e7fd24c6c5 100644
> > > > > --- a/include/hw/acpi/acpi-defs.h
> > > > > +++ b/include/hw/acpi/acpi-defs.h
> > > > > @@ -53,6 +53,17 @@ struct AcpiRsdpDescriptor { /* Root System
> > > > > Descriptor Pointer */
> > > > > } QEMU_PACKED;
> > > > > typedef struct AcpiRsdpDescriptor AcpiRsdpDescriptor;
> > > > >
> > > > > +typedef struct AcpiRsdpData {
> > > > > + uint8_t oem_id[6]; /* OEM identification */
> > > > > + uint8_t revision; /* Must be 0 for 1.0, 2 for 2.0 */
> > > > > +
> > > > > + unsigned *rsdt_tbl_offset;
> > > > > + unsigned *xsdt_tbl_offset;
> > > > > +} AcpiRsdpData;
> > > > > +
> > > >
> > > > > +#define ACPI_RSDP_REV_1 0
> > > > > +#define ACPI_RSDP_REV_2 2
> > > > it's one time used spec defined values so just use values directly
> > > > in place with a comment, so reader won't have to jump around code
> > > > when comparing to spec.
> > > It's also used in the ACPI tests fix patch.
> > it's better to use in test it's own version (we just opencode them there)
> > see fadt_fetch_facs_and_dsdt_ptrs()/sanitize_fadt_ptrs()
> > same applies for length.
>
> I think you're trying to explain to me that this:
>
> /* sdt->aml field offset := spec offset - header size */
> memset(sdt->aml + 0, 0, 4); /* sanitize FIRMWARE_CTRL(36) ptr */
> memset(sdt->aml + 4, 0, 4); /* sanitize DSDT(40) ptr */
> if (sdt->header.revision >= 3) {
> memset(sdt->aml + 96, 0, 8); /* sanitize X_FIRMWARE_CTRL(132) ptr
> */
> memset(sdt->aml + 104, 0, 8); /* sanitize X_DSDT(140) ptr */
> }
>
> is good coding practice. I'm having a hard time internalizing that
> hard coded constants and comments not directly mapping the code (How do
> I map "sanitize X_FIRMWARE_CTRL(132) ptr" to "sdt->aml + 96, 0, 8"?) is
> indeed good practice. But I'll take the pragmatic route and follow what
> you guys advice for.
>
>
> > that way if we break it in qemu's code test would catch the thing
> >
> > > Also the 0 for revision 1 is a little confusing, I feel the above
> > > definition is clearer.
> > that's confusion is in the spec, so we just mimic it, no need to add more
> > on top
> >
> > >
> > >
> > > > > +
> > > > > /* Table structure from Linux kernel (the ACPI tables are under the
> > > > > BSD license) */
> > > > >
> > > > > diff --git a/hw/arm/virt-acpi-build.c b/hw/arm/virt-acpi-build.c
> > > > > index 0835900052..2dad465ecf 100644
> > > > > --- a/hw/arm/virt-acpi-build.c
> > > > > +++ b/hw/arm/virt-acpi-build.c
> > > > > @@ -368,7 +368,7 @@ static void acpi_dsdt_add_power_button(Aml *scope)
> > > > >
> > > > > /* RSDP */
> > > > > static void
> > > > > -build_rsdp(GArray *rsdp_table, BIOSLinker *linker, unsigned
> > > > > xsdt_tbl_offset)
> > > > > +build_rsdp(GArray *rsdp_table, BIOSLinker *linker, AcpiRsdpData
> > > > > *rsdp_data)
> > > > > {
> > > > > AcpiRsdpDescriptor *rsdp = acpi_data_push(rsdp_table, sizeof
> > > > > *rsdp);
> > > > > unsigned xsdt_pa_size = sizeof(rsdp->xsdt_physical_address);
> > > > > @@ -379,14 +379,14 @@ build_rsdp(GArray *rsdp_table, BIOSLinker
> > > > > *linker, unsigned xsdt_tbl_offset)
> > > > > true /* fseg memory */);
> > > > >
> > > > > memcpy(&rsdp->signature, "RSD PTR ", sizeof(rsdp->signature));
> > > > > - memcpy(rsdp->oem_id, ACPI_BUILD_APPNAME6, sizeof(rsdp->oem_id));
> > > > > + memcpy(rsdp->oem_id, rsdp_data->oem_id, sizeof(rsdp->oem_id));
> > > > > rsdp->length = cpu_to_le32(sizeof(*rsdp));
> > > > > - rsdp->revision = 0x02;
> > > > > + rsdp->revision = rsdp_data->revision;
> > > > >
> > > > > /* Address to be filled by Guest linker */
> > > > > bios_linker_loader_add_pointer(linker,
> > > > > ACPI_BUILD_RSDP_FILE, xsdt_pa_offset, xsdt_pa_size,
> > > > > - ACPI_BUILD_TABLE_FILE, xsdt_tbl_offset);
> > > > > + ACPI_BUILD_TABLE_FILE, *rsdp_data->xsdt_tbl_offset);
> > > > >
> > > > > /* Checksum to be filled by Guest linker */
> > > > > bios_linker_loader_add_checksum(linker, ACPI_BUILD_RSDP_FILE,
> > > > > @@ -399,6 +399,20 @@ build_rsdp(GArray *rsdp_table, BIOSLinker
> > > > > *linker, unsigned xsdt_tbl_offset)
> > > > > (char *)&rsdp->extended_checksum - rsdp_table->data);
> > > > > }
> > > > >
> > > > > +static void
> > > > > +init_rsdp_data(AcpiRsdpData *data, const char *oem_id, uint8_t
> > > > > revision,
> > > > > + unsigned *rsdt_offset, unsigned *xsdt_offset)
> > > > > +{
> > > > > + /* Caller must provide an OEM ID */
> > > > > + g_assert(oem_id);
> > > > > + g_assert(strlen(oem_id) >= 6);
> > > > > +
> > > > > + memcpy(data->oem_id, oem_id, 6);
> > > > > + data->revision = revision;
> > > > > + data->rsdt_tbl_offset = rsdt_offset;
> > > > > + data->xsdt_tbl_offset = xsdt_offset;
> > > > > +}
> > > > > +
> > > > > static void
> > > > > build_iort(GArray *table_data, BIOSLinker *linker, VirtMachineState
> > > > > *vms)
> > > > > {
> > > > > @@ -810,6 +824,7 @@ void virt_acpi_build(VirtMachineState *vms,
> > > > > AcpiBuildTables *tables)
> > > > > GArray *table_offsets;
> > > > > unsigned dsdt, xsdt;
> > > > > GArray *tables_blob = tables->table_data;
> > > > > + AcpiRsdpData rsdp;
> > > > s/rsdp/rsdp_info/
> > > >
> > > > >
> > > > > table_offsets = g_array_new(false, true /* clear */,
> > > > > sizeof(uint32_t));
> > > > > @@ -857,7 +872,9 @@ void virt_acpi_build(VirtMachineState *vms,
> > > > > AcpiBuildTables *tables)
> > > > > build_xsdt(tables_blob, tables->linker, table_offsets, NULL,
> > > > > NULL);
> > > > >
> > > > > /* RSDP is in FSEG memory, so allocate it separately */
> > > > > - build_rsdp(tables->rsdp, tables->linker, xsdt);
> > > > > + init_rsdp_data(&rsdp, ACPI_BUILD_APPNAME6, ACPI_RSDP_REV_2,
> > > > > + NULL, &xsdt);
> > > > It would be more concise to use declarative style without extra clutter:
> > > >
> > > > - init_rsdp_data(&rsdp, ACPI_BUILD_APPNAME6, ACPI_RSDP_REV_2,
> > > > - NULL, &xsdt);
> > > > - build_rsdp(tables->rsdp, tables->linker, &rsdp);
> > > > + {
> > > > + AcpiRsdpData rsdp = {
> > > > + .revision = 2,
> > > > + .oem_id = ACPI_BUILD_APPNAME6,
> > > > + .xsdt_tbl_offset = &xsdt,
> > > > + .rsdt_tbl_offset = NULL,
> > > > + };
> > > > + build_rsdp(tables->rsdp, tables->linker, &rsdp);
> > > > + }
> > > 2 things here, imo:
> > >
> > > - This is not more concise.
> > with function, one have to jump to it's definition/body to find out what
> > each argument is, with declaration + initialization inplace it's clear
> > what values mean as you see fields right there as well.
> With a structure you need to go and look at the structure definition to
> know which fields you need to initialize and what their names are. And
> no, you can't safely copy paste the above snippet and rest assured your
> code is safe, because C allows you to leave some structure fields
> uninitialized.
>
> > If it's simple structure it is clearer to use initializer, instead of
> > wrapper helper. With complex structure it could be other way around.
> >
> > > - It's code duplication as almost the same snippet is going to be used
> > > for i386/acpi-build.c
> > the same goes for init_rsdp_data(...)
> I disagree here as well. But I'd like to see this code being merged,
> I'll comply. Do you have any comments on the tests part of that serie,
> besides the fact that it's using defined constants as opposed to hard
> coded ones?
I just saw your comments on patch #8, thanks.
Cheers,
Samuel.
- [Qemu-arm] [PATCH 5/8] hw: arm: Convert the RSDP build to the buid_append_foo() API, (continued)
[Qemu-arm] [PATCH 7/8] hw: acpi: Export and share the ARM RSDP build, Samuel Ortiz, 2018/11/26
[Qemu-arm] [PATCH 6/8] hw: arm: Support both legacy and current RSDP build, Samuel Ortiz, 2018/11/26
[Qemu-arm] [PATCH 8/8] hw: acpi: Remove AcpiRsdpDescriptor and fix tests, Samuel Ortiz, 2018/11/26