[Qemu-arm] [PATCH v9 1/4] hw/ptimer: Fix issues caused by the adjusted timer limit value

[Dmitry Osipenko]

Multiple issues here related to the timer with a adjusted .limit value:

1) ptimer_get_count() returns incorrect counter value for the disabled
timer after loading the counter with a small value, because adjusted limit
value is used instead of the original.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 0, 1)
    4) ptimer_get_count(t) <-- would return 10000 instead of 0

2) ptimer_get_count() might return incorrect value for the timer running
with a adjusted limit value.

For instance:
    1) ptimer_stop(t)
    2) ptimer_set_period(t, 1)
    3) ptimer_set_limit(t, 10, 1)
    4) ptimer_run(t)
    5) ptimer_get_count(t) <-- might return value > 10

3) Neither ptimer_set_period() nor ptimer_set_freq() are adjusting the
limit value, so it is still possible to make timer timeout value
arbitrary small.

For instance:
    1) ptimer_set_period(t, 10000)
    2) ptimer_set_limit(t, 1, 0)
    3) ptimer_set_period(t, 1) <-- bypass limit correction

Fix all of the above issues by adjusting timer period instead of the limit.
Do the adjust for periodic timer only.

Signed-off-by: Dmitry Osipenko <address@hidden>
---
 hw/core/ptimer.c | 59 ++++++++++++++++++++++++++++++++++----------------------
 1 file changed, 36 insertions(+), 23 deletions(-)

diff --git a/hw/core/ptimer.c b/hw/core/ptimer.c
index edf077c..035af97 100644
--- a/hw/core/ptimer.c
+++ b/hw/core/ptimer.c
@@ -34,20 +34,39 @@ static void ptimer_trigger(ptimer_state *s)
 
 static void ptimer_reload(ptimer_state *s)
 {
-    if (s->delta == 0) {
+    uint32_t period_frac = s->period_frac;
+    uint64_t period = s->period;
+    uint64_t delta = s->delta;
+    uint64_t limit = s->limit;
+
+    if (delta == 0) {
         ptimer_trigger(s);
-        s->delta = s->limit;
+        delta = limit;
     }
-    if (s->delta == 0 || s->period == 0) {
+    if (delta == 0 || period == 0) {
         fprintf(stderr, "Timer with period zero, disabling\n");
         s->enabled = 0;
         return;
     }
 
+    /*
+     * Artificially limit timeout rate to something
+     * achievable under QEMU.  Otherwise, QEMU spends all
+     * its time generating timer interrupts, and there
+     * is no forward progress.
+     * About ten microseconds is the fastest that really works
+     * on the current generation of host machines.
+     */
+
+    if ((s->enabled == 1) && (limit * period < 10000)) {
+        period = 10000 / limit;
+        period_frac = 0;
+    }
+
     s->last_event = s->next_event;
-    s->next_event = s->last_event + s->delta * s->period;
-    if (s->period_frac) {
-        s->next_event += ((int64_t)s->period_frac * s->delta) >> 32;
+    s->next_event = s->last_event + delta * period;
+    if (period_frac) {
+        s->next_event += ((int64_t)period_frac * delta) >> 32;
     }
     timer_mod(s->timer, s->next_event);
 }
@@ -82,6 +101,8 @@ uint64_t ptimer_get_count(ptimer_state *s)
             uint64_t div;
             int clz1, clz2;
             int shift;
+            uint32_t period_frac = s->period_frac;
+            uint64_t period = s->period;
 
             /* We need to divide time by period, where time is stored in
                rem (64-bit integer) and period is stored in period/period_frac
@@ -93,8 +114,13 @@ uint64_t ptimer_get_count(ptimer_state *s)
                backwards.
             */
 
+            if ((s->enabled == 1) && (s->limit * period < 10000)) {
+                period = 10000 / s->limit;
+                period_frac = 0;
+            }
+
             rem = s->next_event - now;
-            div = s->period;
+            div = period;
 
             clz1 = clz64(rem);
             clz2 = clz64(div);
@@ -103,13 +129,13 @@ uint64_t ptimer_get_count(ptimer_state *s)
             rem <<= shift;
             div <<= shift;
             if (shift >= 32) {
-                div |= ((uint64_t)s->period_frac << (shift - 32));
+                div |= ((uint64_t)period_frac << (shift - 32));
             } else {
                 if (shift != 0)
-                    div |= (s->period_frac >> (32 - shift));
+                    div |= (period_frac >> (32 - shift));
                 /* Look at remaining bits of period_frac and round div up if 
                    necessary.  */
-                if ((uint32_t)(s->period_frac << shift))
+                if ((uint32_t)(period_frac << shift))
                     div += 1;
             }
             counter = rem / div;
@@ -181,19 +207,6 @@ void ptimer_set_freq(ptimer_state *s, uint32_t freq)
    count = limit.  */
 void ptimer_set_limit(ptimer_state *s, uint64_t limit, int reload)
 {
-    /*
-     * Artificially limit timeout rate to something
-     * achievable under QEMU.  Otherwise, QEMU spends all
-     * its time generating timer interrupts, and there
-     * is no forward progress.
-     * About ten microseconds is the fastest that really works
-     * on the current generation of host machines.
-     */
-
-    if (!use_icount && limit * s->period < 10000 && s->period) {
-        limit = 10000 / s->period;
-    }
-
     s->limit = limit;
     if (reload)
         s->delta = limit;
-- 
2.6.4