[Qemu-arm] [PATCH 06/10] sdhci_sysbus: Create SD card device in users, not the device itself

[Peter Maydell]

Move the creation of the SD card device from the sdhci_sysbus
device itself into the boards that create these devices.
This allows us to remove the cannot_instantiate_with_device_add
notation because we no longer call drive_get_next in the device
model.

Signed-off-by: Peter Maydell <address@hidden>
---
 hw/arm/xilinx_zynq.c | 17 ++++++++++++++++-
 hw/arm/xlnx-ep108.c  | 19 +++++++++++++++++++
 hw/sd/sdhci.c        | 22 ----------------------
 3 files changed, 35 insertions(+), 23 deletions(-)

diff --git a/hw/arm/xilinx_zynq.c b/hw/arm/xilinx_zynq.c
index 1c1a445..3195055 100644
--- a/hw/arm/xilinx_zynq.c
+++ b/hw/arm/xilinx_zynq.c
@@ -27,6 +27,7 @@
 #include "hw/misc/zynq-xadc.h"
 #include "hw/ssi.h"
 #include "qemu/error-report.h"
+#include "hw/sd/sd.h"
 
 #define NUM_SPI_FLASHES 4
 #define NUM_QSPI_FLASHES 2
@@ -153,8 +154,10 @@ static void zynq_init(MachineState *machine)
     MemoryRegion *address_space_mem = get_system_memory();
     MemoryRegion *ext_ram = g_new(MemoryRegion, 1);
     MemoryRegion *ocm_ram = g_new(MemoryRegion, 1);
-    DeviceState *dev;
+    DeviceState *dev, *carddev;
     SysBusDevice *busdev;
+    DriveInfo *di;
+    BlockBackend *blk;
     qemu_irq pic[64];
     Error *err = NULL;
     int n;
@@ -260,11 +263,23 @@ static void zynq_init(MachineState *machine)
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0100000);
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[56-IRQ_OFFSET]);
 
+    di = drive_get_next(IF_SD);
+    blk = di ? blk_by_legacy_dinfo(di) : NULL;
+    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
+    qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+    object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
+
     dev = qdev_create(NULL, "generic-sdhci");
     qdev_init_nofail(dev);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xE0101000);
     sysbus_connect_irq(SYS_BUS_DEVICE(dev), 0, pic[79-IRQ_OFFSET]);
 
+    di = drive_get_next(IF_SD);
+    blk = di ? blk_by_legacy_dinfo(di) : NULL;
+    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
+    qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+    object_property_set_bool(OBJECT(carddev), true, "realized", &error_fatal);
+
     dev = qdev_create(NULL, TYPE_ZYNQ_XADC);
     qdev_init_nofail(dev);
     sysbus_mmio_map(SYS_BUS_DEVICE(dev), 0, 0xF8007100);
diff --git a/hw/arm/xlnx-ep108.c b/hw/arm/xlnx-ep108.c
index 85b978f..cb95d32 100644
--- a/hw/arm/xlnx-ep108.c
+++ b/hw/arm/xlnx-ep108.c
@@ -34,6 +34,7 @@ static void xlnx_ep108_init(MachineState *machine)
 {
     XlnxEP108 *s = g_new0(XlnxEP108, 1);
     Error *err = NULL;
+    int i;
 
     object_initialize(&s->soc, sizeof(s->soc), TYPE_XLNX_ZYNQMP);
     object_property_add_child(OBJECT(machine), "soc", OBJECT(&s->soc),
@@ -45,6 +46,24 @@ static void xlnx_ep108_init(MachineState *machine)
         exit(1);
     }
 
+    /* Create and plug in the SD cards */
+    for (i = 0; i < XLNX_ZYNQMP_NUM_SDHCI; i++) {
+        BusState *bus;
+        DriveInfo *di = drive_get_next(IF_SD);
+        BlockBackend *blk = di ? blk_by_legacy_dinfo(di) : NULL;
+        DeviceState *carddev;
+
+        bus = qdev_get_child_bus(DEVICE(&s->soc.sdhci[i]), "sd-bus");
+        if (!bus) {
+            error_report("No SD bus found for SD card %d", i);
+            exit(1);
+        }
+        carddev = qdev_create(bus, TYPE_SD);
+        qdev_prop_set_drive(carddev, "drive", blk, &error_fatal);
+        object_property_set_bool(OBJECT(carddev), true, "realized",
+                                 &error_fatal);
+    }
+
     if (machine->ram_size > EP108_MAX_RAM_SIZE) {
         error_report("WARNING: RAM size " RAM_ADDR_FMT " above max supported, "
                      "reduced to %llx", machine->ram_size, EP108_MAX_RAM_SIZE);
diff --git a/hw/sd/sdhci.c b/hw/sd/sdhci.c
index 17e08a2..c8e3865 100644
--- a/hw/sd/sdhci.c
+++ b/hw/sd/sdhci.c
@@ -1296,26 +1296,6 @@ static void sdhci_sysbus_realize(DeviceState *dev, Error 
** errp)
 {
     SDHCIState *s = SYSBUS_SDHCI(dev);
     SysBusDevice *sbd = SYS_BUS_DEVICE(dev);
-    DriveInfo *di;
-    BlockBackend *blk;
-    DeviceState *carddev;
-
-    /* Create and plug in the sd card.
-     * FIXME: this should be done by the users of this device so we
-     * do not use drive_get_next() here.
-     */
-    di = drive_get_next(IF_SD);
-    blk = di ? blk_by_legacy_dinfo(di) : NULL;
-
-    carddev = qdev_create(qdev_get_child_bus(dev, "sd-bus"), TYPE_SD);
-    qdev_prop_set_drive(carddev, "drive", blk, errp);
-    if (*errp) {
-        return;
-    }
-    object_property_set_bool(OBJECT(carddev), true, "realized", errp);
-    if (*errp) {
-        return;
-    }
 
     s->buf_maxsz = sdhci_get_fifolen(s);
     s->fifo_buffer = g_malloc0(s->buf_maxsz);
@@ -1333,8 +1313,6 @@ static void sdhci_sysbus_class_init(ObjectClass *klass, 
void *data)
     dc->vmsd = &sdhci_vmstate;
     dc->props = sdhci_sysbus_properties;
     dc->realize = sdhci_sysbus_realize;
-    /* Reason: instance_init() method uses drive_get_next() */
-    dc->cannot_instantiate_with_device_add_yet = true;
 }
 
 static const TypeInfo sdhci_sysbus_info = {
-- 
1.9.1