|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] issue with digital_cam and DC_SHOT message on 5.4.2 |
Date: | Mon, 15 Jun 2015 22:32:17 +0200 |
I have replayed the flight and basically DC_SHOT and DC_INFO report every photo taken, but for most of them the geographic coordinates are equal to 0. This behavior only happens in flight, not in the simulation.I am running 5.4.2 with the nav_survey_zamboni.xml and I use the following #include in the flight plan:#include "subsystems/datalink/datalink.h"#include "modules/digital_cam/dc.h"//#define LINE_START_FUNCTION dc_autoshoot = DC_AUTOSHOOT_DISTANCE;//#define LINE_START_FUNCTION dc_Survey(dc_gps_dist);#define LINE_START_FUNCTION dc_Survey(40);#define LINE_STOP_FUNCTION dc_autoshoot = DC_AUTOSHOOT_STOP;On Sat, Jun 13, 2015 at 6:29 PM, Joseph Muhlhausen <address@hidden> wrote:I have taken a series of photo this afternoon. The trigger worked properly but on the GCS there where only one yellow dot per survey line and when I parse DC_SHOT most of the entries have Lat and Lon values at 0.Is this a bug or am I missing something?
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |