paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Installing paparazzi 4.2 on Ubuntu 12.04


From: Felix Ruess
Subject: Re: [Paparazzi-devel] Installing paparazzi 4.2 on Ubuntu 12.04
Date: Wed, 28 Jan 2015 20:52:05 +0100

Uploaded a new source package ivy-ocaml_1.3.1ppa3~precise with compatibility symlinks enabled to launchpad...
Should be built and published in the ppa soon.

On Wed, Jan 28, 2015 at 8:04 PM, Michal Podhradsky <address@hidden> wrote:
Ace, that sounds like the best option.
Thanks!
M

On Wed, Jan 28, 2015 at 11:00 AM, Felix Ruess <address@hidden> wrote:

The older version should still be available in the ppa. So you should be able to just apt-get install it and force the old 1.2-3something version.

But I think I will just trigger a rebuild for precise with the compatibility enabled.
When I uploaded new packages to trigger the arm build I forgot that it would be good to enable that for precise only.

Will do that when I get home.

Cheers, Felix

Am 28.01.2015 19:34 schrieb "Michal Podhradsky" <address@hidden>:

Thanks Felix for quick reply.

If I install ivy-ocaml 1.2 as described here (http://wiki.paparazziuav.org/wiki/Installation/FromScratch#Ivy-OCaml) how do I enable it?

Also, will I be able to use paparazzi 5.4 at the same time as paparazzi 4.2?

M

On Wed, Jan 28, 2015 at 10:27 AM, Felix Ruess <address@hidden> wrote:
Hi Michal,

the latest version of ivy-ocaml is built without the backwards compatibility symlinks.
So you could either install an older ivy-ocaml package (version 1.2x), build it from source and enable them again or create the symlinks yourself by hand.

Or I add the symlinks only for the precise package again...

It is a bit annoying though if you have a Paparazzi v5.x and the symlinks, it always warns that the interfaces exist in multiple dirs...

Cheers, Felix

On Wed, Jan 28, 2015 at 7:12 PM, Michal Podhradsky <address@hidden> wrote:
Hi all,

I have a legacy version of paparazzi (essentially 4.2 with minor changes in the ap code), and I need to make it run on a new machine with Ubuntu 12.04.

I followed the install guide from wiki:

sudo add-apt-repository ppa:paparazzi-uav/ppa
sudo apt-get update
sudo apt-get install paparazzi-dev
sudo apt-get install paparazzi-arm-multilib

when I run make in the ppprzi directory I get the following error:
...
OC pprz.mli
File "pprz.mli", line 170, characters 78-89:
Error: Unbound module Ivy
make[1]: *** [pprz.cmi] Error 2
make: *** [lib] Error 2


From wiki (http://wiki.paparazziuav.org/wiki/Installation/FromScratch#Paparazzi_Main_sourcecode) it looks like some it is some missing Ocaml/Ivy linking.

Any ideas how to fix it? I already have latest paparazzi (master) running on the machine.

Regards
Michal

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]