|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] GCS in Beaglebone Board |
Date: | Tue, 20 Jan 2015 16:17:35 +0100 |
Also please note that post error messages as text and not as screenshot is much nicer!You can try the linux_float_abi branch, or more specifically https://github.com/paparazzi/paparazzi/commit/821324f2b346408ca5909a2a34a28350cbcff3d8The problem seems to be that it is not linked with same softfp arguments as it is compiled.Hi,I don't think anyone has actually cross compiled the firmware on a RaspberryPi so far (at least not with the default toolchain).
Cheers, FelixOn Fri, Jan 16, 2015 at 2:38 PM, hatikuay <address@hidden> wrote:i have a problem with installing paparaazi on raspbery pi. i installed this
link http://wiki.paparazziuav.org/wiki/Installation/RaspberryPi. there is
not error with installing but then i started paparazzi but not worked. there
was an error occured with rumming paparazzi above link
<http://lists.paparazziuav.org/file/n16653/raspberrypi_paparazzi.png>
http://lists.paparazziuav.org/paparazzi-running-error-td16624.html
and are there an image raspberry pi + paparazzi if you send
i an waiting for your replies
--
View this message in context: http://lists.paparazziuav.org/GCS-in-Beaglebone-Board-tp14452p16653.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |