|From:||Kristofer Von Ahnen|
|Subject:||Re: [Paparazzi-devel] Regulate Voltage for Camera Capture|
|Date:||Mon, 24 Nov 2014 11:24:19 -0600|
|User-agent:||Mozilla/5.0 (X11; Linux x86_64; rv:31.0) Gecko/20100101 Thunderbird/31.0|
I'm using a deprecated version of PaparraziUAV (paparrazi3), and
plan on using the CAM unit on the TWOG to use a signal's rising edge
to set off the camera's capture. I came across the following online:|
It has a sample module for the digital_cam which I have implemented into our airframe configuration file. We began testing the CamSW pin on the CAM unit on the TWOG board to see if the voltage across it matched the 4Hz specified in the module. Unfortunately the voltage stayed at a constant 3.3V.
I have attached our airframe file, with the module near the bottom (ln201) and its source (.c/.h) included in the raw Makefile section (ln226). Does anyone know if this is the correct syntax? If it is, why would we be getting a constant reading of 3.3V when it should only rise in voltage 4 times a second?
On 11/23/2014 03:17 AM, Prof. Dr.-Ing. Heinrich Warmers wrote:
Description: Text Data
|[Prev in Thread]||Current Thread||[Next in Thread]|