[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Can I replace Floss-JTAG by JLINK-V8 produced by S
Re: [Paparazzi-devel] Can I replace Floss-JTAG by JLINK-V8 produced by SEGGER
Thu, 9 Oct 2014 15:23:47 +0800 (CST)
Thanks a lot for your gelivable reply.
There are several new questions:
1. Is the sentence <configure name="ap.OOCD_BOARD" value="jlink"/> should be add in file **.xml? As there are some many .xml, I don't know which one is the one that I needed.
2. As you suggested, we have successfully uploaded the bootloader via some means. However, we meet new problem now
Look forward for your reply .
At 2014-10-08 16:53:12, "Felix Ruess" <address@hidden> wrote:
you can of course always use your own tool to upload the final firmware hex/elf file from var/aircrafts/<name>/ap/ap.hex
If the Segger-JLINK works with OpenOCD you can probably just <configure name="ap.OOCD_BOARD" value="jlink"/> or something like that.