Why not using fw stabilization, with setting D term only and the other equal to zero?
Regards
Loic
Le 10 mai 2014 16:22, "Luke Ionno" <
address@hidden> a écrit :
Hello,
I'm trying to implement pitch/roll/yaw damping on a fixed-wing airframe; for
this particular aircraft, I won't be using attitude stabilization or
navigation. I've got a Apogee 1.00 board installed, with the MPU-9150
IMU/magnetometer chipset. My original plan was to simply set it up as a
rotorcraft, and use the RATE_DIRECT mode, but from what I understand, there
is no Apogee IMU driver that supports the -9150, correct? Since I have no
intention of using NAV on this aircraft, not having the magnetometer data
isn't an issue, in and of itself, but it does prevent me from using the
rotary-wing firmware. Is there any way to achieve 3-axis damping using the
fixed-wing firmware? If not, I can switch out the Apogee for a LISA/M, but
since I just finished crimping all the PicoBlade connectors onto my servos,
I'd prefer to stick with the Apogee if possible.
Thanks!
-Luke
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel