Re: [Paparazzi-devel] Using 2 RC receivers on board

[GalapagosUAV]

Hello Chris,


Thank you for your reply. How does the Frsky ACCST system would help or replace 
a system with 2 receivers? I looked at their webpage but there is not much more 
info. 

I am currently using Futaba T8J 2.4GHz S-FHSS. I haven't had problems with my 
RC radios, however I would to be able to override the autopilot (I am using a 
YAPA2) in case of failure. 


Best Regards,
Jorge

> On 08/05/2014, at 15:16, Chris <address@hidden> wrote:
> 
> You don't need two, use the Frsky ACCST system (actually developed by ACT 
> Germany) and fly happily
> without problems.
> If you insist i think paparazzi autopilots can use two spectrum receivers 
> which personally i don't trust at all.
> Have a look in the wiki under Hardware -> autopilots
> Chris
> 
> 
>> On 05/08/2014 07:55 PM, GalapagosUAV wrote:
>> Dear all,
>> 
>> 
>> I would like to know if anyone has ever used 2 RC receivers on board for 
>> redundancy purposes? If yes, how can I do this? What I would like to do is 
>> while having one receiver connected to the autopilot via de PPM encoder, 
>> have another one that is not connected to autopilot but goes directly to the 
>> servos in case of autopilot failure.
>> 
>> Best Regards,
>> Jorge
>> _______________________________________________
>> Paparazzi-devel mailing list
>> address@hidden
>> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
> 
> 
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel