Hi Balazs,
This has nothing to do with the telemetry config file...
All received or transmitted messages are logged, which includes the
SETTING message from the datalink class (sent from ground to the
aircraft) and the DL_VALUE and DL_SETTING messages.
Cheers, Felix
On Fri, Nov 22, 2013 at 2:59 PM, <address@hidden [3]> wrote:
Hi,
we are using Paparazzi for 4-5 years but with low intensity. Now we
had again succsessful flights with a 2.5 kg electric UAV equipped
with Twog+XsensMtiG. The UAV has acquired 4.5 hour flight time
already without any problem. It can fly safe and acquired huge
amount of data in order to identify the flight model. Now I started
to optimize (fine tune) the parameters of the autopilot. I tried to
include the "SETTINGS" message in the telemetry config file in order
to log the value of the parameters, but the compile failed. (v5.01)
I wonder if somebody knows a solution to log the uploaded values of
the parameters? (Excluding the stopwatch-paper-pencil method :) )
Regards,
Balazs
_______________________________________________
Paparazzi-devel mailing list
address@hidden [1]
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel [2]
Links:
------
[1] mailto:address@hidden
[2] https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[3] mailto:address@hidden