Hi, guys:
Currently, I have two quad-copters using Lisa/M 2.0 board and I want to control them using one single ground station. And I am using the 'Xbee Pro S2B' module for communication.
The question is:
How to configure the Xbee modules using X-CTU so that I can use one ground station to control these quad-copters.
Are the Xbee module on ground using 'COORDINATOR API' mode?
Are the Xbee modules in air using 'ROUTER/END DEVICE API' mode?
It will be helpful if you can provide an example configuration procedure.
Thanks
YI