Re: [Paparazzi-devel] Problem in Installation

[Jake Tarren]

I'm using 12.10.  Not one of the supported ones.  I didn't even think to check if it's compatible, thanks.

On Wed, Oct 23, 2013 at 2:47 PM, Felix Ruess <address@hidden> wrote:

Hi Jake,

which Ubuntu version are you using?

In terry.guo's ppa it's not available for all Ubuntu versions and in mine it's only built for 12.04 precise....

If it's not there, just unpack the tarball... no installation required.

Cheers, Felix

On Wed, Oct 23, 2013 at 8:38 PM, Jake Tarren <address@hidden> wrote:

I've added terry.guo's repository, but I'm still getting "unable to locate package gcc-arm-none-eabi" when trying to install the eabi package.

I tried adding your repository, Felix, but I'm getting a Cannot access PPA error.

I was, however, able to install all the other packages.

On Mon, Oct 14, 2013 at 7:31 AM, Felix Ruess <address@hidden> wrote:

Hi,

under Ubuntu 12.04 all you need to do is:

  sudo add-apt-repository ppa:paparazzi-uav/ppa

  sudo apt-get update

  sudo apt-get install paparazzi-dev

 

If you want to use Paparazzi v4.x or earlier versions:

  sudo apt-get install paparazzi-arm-multilib

Or if you want to use Paparazzi v5.0 or later and also want support for STM32F4 MCUs, install the gcc-arm-embedded toolchain.

You can either just unpack the tarball from https://launchpad.net/gcc-arm-embedded/ and put it in your PATH,

or install the binary package from either the "official" ppa:

  sudo add-apt-repository ppa:terry.guo/gcc-arm-embedded

Or if you want Python support in GDB, you can use mine:

  sudo add-apt-repository ppa:flixr/gcc-arm-embedded

Then install the gcc-arm-none-eabi package:

  sudo apt-get update

  sudo apt-get install gcc-arm-none-eabi

If you want to use JSBSim:

  sudo apt-get install paparazzi-jsbsim

There should be no need to "manually" install other packages to compile Paparazzi.

If you do get some errors, please post the full output with details of which packages you installed and which paparazzi_version you are using.

Cheers, Felix

On Mon, Oct 14, 2013 at 10:39 AM, masoumeh hamidi <address@hidden> wrote:

 Hi every one,

I am installing paparazzi on ubuntu 12.04. I am following all the instructions in page http://paparazzi.enac.fr/wiki/Installation/Linux. But I have got a lot of errors in making paparazzi!!!! after manually installation of many packages, now I see the following error when I try to make paparazzi.I cannot fix this error.

{

make -C sw/lib/ocaml
OC fig.ml
File "fig.ml", line 1, characters 0-1:
Error: Could not find the .cmi file for interface fig.mli.
make[1]: *** [fig.cmo] Error 2
make: *** [libpprz] Error 2
}

Please help me. what can I do?

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel