Re: [Paparazzi-devel] servo switch from gcs

[Felix Ruess]

Hi,

I just made the servo_switch module was just a quick demo for someone...

It currently only supports one servo, but you could add a second one in sw/airborne/modules/servo_switch/servo_switch.c (and .h)

E.g. add replace servo_switch_on by two variables servo_switch1_on and servo_switch2_on and also add ServoSwitch2[On|Off] macros.

Cheers, Felix

On Wed, Oct 2, 2013 at 10:04 PM, Marius Pfeffer <address@hidden> wrote:

Is it not possible zo add multiple servos with servo_switch module ?

Am 02.10.2013 21:59 schrieb "Iman" <address@hidden>:

Hi

May I to use "Digital camera control (trigger using servo)" module for my
camera IR switch?(it operates by PWM pulse)

How can I add it to my airframe file and flight plan?





--
View this message in context: http://paparazzi.517.n7.nabble.com/servo-switch-from-gcs-tp4839p13723.html
Sent from the paparazzi-devel mailing list archive at Nabble.com.

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel