paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] ardrone2_raw starts but doesn't fly


From: Christophe De Wagter
Subject: Re: [Paparazzi-devel] ardrone2_raw starts but doesn't fly
Date: Tue, 1 Oct 2013 12:38:42 +0200

For take-off you are supposed to

1) click the start engine flightplan block
2) click the takeoff flightplan block

We have no experience (yet) with flying in raw mode with the Parrot Flight Recorder. 

-Christophe 


On Tue, Oct 1, 2013 at 10:46 AM, Ben Laurie <address@hidden> wrote:
Ping?


On 30 September 2013 14:46, Ben Laurie <address@hidden> wrote:
OK, so I got the Flight Recorder working is sirf mode.

But when I tried to actually fly it, it was a bit weird.

At first, it kept losing GPS fix and switching itself into KILL and refused to do anything. After a few restarts, it seemed to stop doing that, and switching to the Takeoff block span the motors up, but not fast enough to actually take off - it just sat there with everything spinning.

Am I do something wrong? What am I actually supposed to do for takeoff? Go to Start Engine first? Or what?



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



reply via email to

[Prev in Thread] Current Thread [Next in Thread]