|
From: | Marius Pfeffer |
Subject: | Re: [Paparazzi-devel] stm32f4 discovery |
Date: | Mon, 26 Aug 2013 15:26:47 +0200 |
Hi
The stm32f3 and stm32f4 discovery do not have the same pinout.
A sensor board that is compatible with both will be difficoult to draw in eagle and with a huge amount of solder jumpers.
Just wanted to mention.
sincerely
Marius
Hi,
there are all so ports to the stm32f3 discovery:
https://stratum0.org/wiki/Multikopter#NG-UAVP_STM32F4_Teststatus_.28201301.29
https://github.com/lilvinz/OpenPilot
You have only to by a pressure sensor.
http://www.rcswift.com/
https://github.com/lilvinz/OpenPilot/wiki/Discovery-F4-what-this-is-about
Regads
Heinrich
Chris schrieb:
I forgot to say that most of the things i need to be on a daughterboard (and i will fit )for the discovery are safety and protection components like adc input protection, adc user settable voltage scaling
(sometimes i need the input to be 5vother 3.3), voltage spike protection, modem and gps uart line protection (as those are often remotely mounted) etc.
Chris
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |