Re: [Paparazzi-devel] Trouble getting Eagle Tree Airspeed Sensor working

[Chris]

I never solved it, mine was jamming the whole I2C channel, so i went the 
analog way with the MPXV7002DP and i didn't regretted it, it works fine.
If you go this way also email me if you need the driver files which are 
really an ADC readout module and an averaging filter.
You can also use the auxiliary ADC channels for the sensor as the wiki 
describes.
Chris

On 06/09/2013 07:00 PM, address@hidden wrote:
> I recently got the Eagle Tree airspeed sensor so that I can use the energy
> based altitude control loops with my plane. However, when I follow the
> instructions as per here:http://paparazzi.enac.fr/wiki/Module/Airspeed_ETS  the
> code build's fine, but once I upload it to the TWOG, there is no telemetry
> sent. I believe this is a different problem than the widely reported issue
> of the Eagle Tree Sensor only working when the autopilot is flashed, not
> when the autopilot was booted up normally.