[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Drotek imu calibration problem

From: Felix Ruess
Subject: Re: [Paparazzi-devel] Drotek imu calibration problem
Date: Tue, 9 Apr 2013 19:55:19 +0200

Hi Chris,

the calibration result looks good. Did you create the log with the same subsystem/configuration?
To check your scale, please switch telemetry to scaled_sensors and make sure you get -9.81 m/s² on z when the IMU is level.

Cheers, Felix

On Mon, Apr 8, 2013 at 6:39 PM, Eduardo lavratti <address@hidden> wrote:
i have a IMU similar to aspirin (mpu6050 + adxl345 + hmc58xx + ms5611) running on v4.2 .
2 months ago i tested the same IMU on master and it worked fine.

> From: address@hidden
> Date: Mon, 8 Apr 2013 16:13:15 +0200

> To: address@hidden
> Subject: Re: [Paparazzi-devel] Drotek imu calibration problem
> just a question to make sure its not a problem with my setup - has anyone an aspirin or a drotec imu running via i2c on master branche? I tried both -no success so far... on 4.2 both are running just fine.
> Tobi
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]