[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Paparazzi-devel] Cannot upload the firmware any more
From: |
Felix Ruess |
Subject: |
Re: [Paparazzi-devel] Cannot upload the firmware any more |
Date: |
Mon, 11 Mar 2013 19:37:24 +0100 |
Hi Chris,
after backporting some fixes to make th dfu uploader more robust and not accidentally upload to the wrong device I forgot to also backport the commit that allows Lia by default.
Fixed...
Btw, you can always call the script directly to get help:
sw/tools/dfu/stm32_mem.py --help
If you need to upload to a different device:
sw/tools/dfu/stm32_mem.py --product=any --verbose var/airframe/ap.bin
Cheers, Felix
On Mon, Mar 11, 2013 at 7:18 PM, Chris
<address@hidden> wrote:
Hi.
Suddenly i can't upload the firmware to a lia (not lisa)m v2 autopilot i have.
I am running paparazzi 4.2 and i just updated a few hours ago today.
Here is the paparazzi center output:
make[1]: Leaving directory `/home/hendrix/paparazzi/sw/airborne'
cd sw/airborne; make PAPARAZZI_SRC=/home/hendrix/paparazzi PAPARAZZI_HOME=/home/hendrix/paparazzi TARGET=ap upload
make[1]: Entering directory `/home/hendrix/paparazzi/sw/airborne'
Using stm32 mem dfu loader
/usr/bin/python /home/hendrix/paparazzi/sw/tools/dfu/stm32_mem.py /home/hendrix/paparazzi/var/X8_lisa/ap/ap.bin
Could not find STM32 (autopilot) device.
make[1]: *** [upload] Error 1
make[1]: Leaving directory `/home/hendrix/paparazzi/sw/airborne'
make: *** [ap.upload] Error 2
make: Leaving directory `/home/hendrix/paparazzi'
DONE (exec make -C /home/hendrix/paparazzi -f Makefile.ac AIRCRAFT=X8_lisa ap.upload 2>&1)
Here is the dmesg output:
[ 490.704200] usb 3-2: new full-speed USB device number 6 using uhci_hcd
[ 498.345873] usb 2-1: usbfs: interface 0 claimed by btusb while 'python' sets config #1
address@hidden:~$
Any ideas?
Chris
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel