[Top][All Lists]

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] PT1000

From: Prof. Dr.-Ing. Heinrich Warmers
Subject: Re: [Paparazzi-devel] PT1000
Date: Mon, 04 Mar 2013 23:46:07 +0100
User-agent: Mozilla/5.0 (Windows; U; Windows NT 5.0; de-DE; rv:1.4) Gecko/20030619 Netscape/7.1 (ax)

think there is a driver for this i2c interface.
But the i2c interface is a 5V type and need a power Voltage greater than 6V.

Árni Þorvaldsson schrieb:


I am going to use pt1000 temperature sensor on my airframe and was wondering 
how the setup should be.

this is the sensor that I am using

I am going to connect it through i2c but would I then need a breakout board for 
the sensor ( like this one..

If anyone is familiar with using the pt1000, please let me know about the best 
set up.

regards Arni

Paparazzi-devel mailing list

reply via email to

[Prev in Thread] Current Thread [Next in Thread]