paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Paparazzi-devel] PT1000


From: Árni Þorvaldsson
Subject: [Paparazzi-devel] PT1000
Date: Mon, 4 Mar 2013 13:32:44 +0000

Hi

I am going to use pt1000 temperature sensor on my airframe and was wondering 
how the setup should be.

this is the sensor that I am using 
http://www.conrad-uk.com/ce/en/product/172041/Heraeus-M222-Pt-1000-platinum-temperature-sensor-70-500-C-3850-ppmK-Class-BF0-30-Signal-DIN-EN-60751

I am going to connect it through i2c but would I then need a breakout board for 
the sensor ( like this one..  
http://www.conrad-uk.com/ce/en/product/502001/Hygrosens-TEMOD-I2C-R1-temperature-sensor-32-to-96-C/SHOP_AREA_37353)

If anyone is familiar with using the pt1000, please let me know about the best 
set up.

regards Arni



reply via email to

[Prev in Thread] Current Thread [Next in Thread]