paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] STM32 adc resolution???


From: Hector Garcia de Marina
Subject: Re: [Paparazzi-devel] STM32 adc resolution???
Date: Mon, 4 Feb 2013 18:21:31 +0100

I used 7002 in the past, and of course you have to compensate it over temperature (as with all "cheap" sensors). but in practice the deviation 
is not so big.

Moreover, with 7002 you have a huge range and you should design an amplifier for your air speeds of interest.

Héctor


On Mon, Feb 4, 2013 at 5:08 PM, Eduardo lavratti <address@hidden> wrote:
Hello hendrix, what sensor are you using ?

3 or 4 months ago i made some tests with 7002 sensor (same used on ardupilot)
I found a problem with temperature compensation.





Date: Mon, 4 Feb 2013 16:02:20 +0100
From: address@hidden
To: address@hidden
Subject: Re: [Paparazzi-devel] STM32 adc resolution???


Yes it is,

but depending on the STM32, you can have one or more than one simultaneous channels.
Héctor


On Mon, Feb 4, 2013 at 3:49 PM, Chris <address@hidden> wrote:
I finished the analog airspeed sensor code (on ADC_3) but i have a question.
My math are correct only when i take the adc resolution to be 12 bits (4096)
Is this correct for the STM32 cpu?
Chris


_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



--
Héctor


_______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel




--
Héctor


reply via email to

[Prev in Thread] Current Thread [Next in Thread]