|
From: | Andrius Batalauskas |
Subject: | Re: [Paparazzi-devel] Fast motor switch off |
Date: | Sun, 03 Feb 2013 19:50:24 +0100 |
User-agent: | Mozilla/5.0 (Windows NT 6.1; WOW64; rv:17.0) Gecko/17.0 Thunderbird/17.0 |
Hello Mr. Warmers,
I don´t know about that kill switch but maybe a faster disarming procedure will do the trick. Passage from our documentation-in-progress (German though): "Die Verzögerung des Motorenstartes wird bis
einschließlich der stabilen
Version 4.2 der Paparazzi Software in der Datei
autopilot_arming_yaw.h
eingestellt. Die Variable MOTOR_ARMING_DELAY gibt die Anzahl der
RC Signale an,
die nacheinander die für den Start bzw. das Abschalten
notwendige Position des
Yaw-Hebels senden müssen. In der Standardkonfiguration sind dies
40 Signale
#ifndef MOTOR_ARMING_DELAY #define MOTOR_ARMING_DELAY 40 #endif Dieser Wert ergibt bei einem 35MHz Sender eine
Verzögerung von etwa einer
Sekunde." You should also be able to define that in your airframe
file:
<define
name="MOTOR_ARMING_DELAY"
value="20"/> Hope, it helps! PS: Just ask Mr. Frommann, if you are interested in the
rest of our documentation. Should be finished by Fr. Am 03.02.2013 09:26, schrieb Prof. Dr.-Ing. Heinrich Warmers: Hi Eduardo, |
[Prev in Thread] | Current Thread | [Next in Thread] |