|
From: | Felix Ruess |
Subject: | Re: [Paparazzi-devel] V4.9 and BAT value problem |
Date: | Tue, 8 Jan 2013 23:55:15 +0100 |
Hi felix,
V4.2 solve my BAT problem,
a small bug still aliv :
<section name="BAT">
<define name="VOLTAGE_ADC_A" value="0.0080" unit="V"/> <!--theorique 0.0074 +1.6-->
<define name="VOLTAGE_ADC_B" value="2" unit="V"/><define name="CATASTROPHIC_BAT_LEVEL" value="16." unit="V"/>
<define name="VoltageOfAdc(adc)" value ="(VOLTAGE_ADC_A * adc + VOLTAGE_ADC_B )"/>
<define name="CRITIC_BAT_LEVEL" value="17." unit="V"/>
<define name="LOW_BAT_LEVEL" value="17.5" unit="V"/>
<define name="MAX_BAT_LEVEL" value="23" unit="V"/>
</section>
I can change "VOLTAGE_ADC_B" to any value, the value on the ground still the same.
Best regards,
Eric
Felix Ruess <address@hidden> a écrit :
Hi Eric,
as I said the bug was introduced when we switched from the stm lib to
libopencm3 in master... there is no point in wasting effort to find at what
time the bug was introduced (is fine in v4.0 and v4.2 as there we didn't
port ADC to libopencm3 yet).
We rather need to find which other subsystem "destroys" the adc
initialization/settings, or if there is some timing/sync issue or what
ever...
I would also recommend to use v4.2 instead of v4.0 ....
Regarding the calculation of the battery value (via VoltageOfAdc(x)): is B
defined? Can you post the relevant part of your airframe file?
It should work fine if it's defined properly, e.g.
https://github.com/paparazzi/paparazzi/blob/v4.2/conf/airframes/examples/twog_analogimu.xml#L94
Cheers, Felix
On Mon, Jan 7, 2013 at 11:03 PM, Eric BAHIER <address@hidden> wrote:
Hi felix,
I have make many test to try to define when the bug appear.
Today I have fly on version v4.0.1_stable-8-gbe4f487-dirty 2012-08-30
On this version evrything smell good. My airframe fixwings.xml file was ok
for IR, it need some modification to be perfect in IMU. Today man and aut1
was OK, AUTO2 was "full camicase version".
On V4.0.1 the bat value is fonctional.
If I try to use BATVALUE= Amul*adc+B. A coef is ok, B coef is not
functional. To try it , Iput it to 10 (volts)... nothing change on BAT on
the ground station.
I will have two days with flying weather.... end of week will be with
dirty weather... It will be the perfect weather to test some versionsssss
and try where is the bug in the GIT tree....
Thank for your help,
best regards
Le 07/01/2013 22:32, Felix Ruess a écrit :
Hi Eric,
it should work fine in the stable releases v4.0 and v4.2. In master
(v4.9) we completely switched to libopencm3 and it seems there were some
regressions introduced when porting the drivers.
Eduardo also reported that the problem only occurs in his setup if he is
using the radio_control ppm subsystem, but not with the spektrum subsystem.
It is probably related to some low level initialization of one of the
drivers...
Still hoping that Stephen will have some time to look at this ;-)
Cheers, Felix
On Tue, Dec 18, 2012 at 1:27 PM, Eric BAHIER <address@hidden>wrote:
Paparazzi-devel mailing address@hiddenorghttps://lists.nongnu.org/mailman/listinfo/paparazzi-develHi felix,
Thanks to look at my bug....
I test with 4 targets:
Lisa/L 1.0 without alone (no GPS, no IMU.....) just the Xbee
Lisa/L 1.0 full ready to fly (GPS,IMU,Xbee, Rx)
Lisa/M 1.0 full ready to fly (GPS,IMU,Xbee, Rx)
booz ready to fly (GPS,IMU,Xbee, Rx)
On my side I work on a lab PC, actualy in paparazzi V4.0.1... it smell
good.
I will verifiy evrything on 4.0.1.... and make the update step by step to
try to find when the bug appear, I will send you his birthday.....
Last time I play with GIT with limited updated, it was not complete
succesfull.... I will win to GIT!!!
Yesterday I look in source code... batcheker.c.......... I can not see
anything.
My feeling is a time schedule problem, I suppose we "forgot" to restart
the ADC processing, the ADC value stay the same evrytime after the first
read....
Today it is only a idea, a feeling......
many thaks,
Eric
Le 18/12/2012 13:04, Felix Ruess a écrit :
Hi Eric,
it works on my Lisa/L 1.0 (no IMU connected at the moment).
I tested it on the Lisa/M 1.0 as well and it indeed doesn't work
correctly, and it seems that there is some problem with proper adc setup if
other peripherals are used as well.
It works when adding adc_init(); electrical_init(); to the end of
main_init()...
The test_adc target works fine.
Couldn't find the actual problem yet... Stephen, Esden, any ideas/time
to look into this?
Created an issue for it:
https://github.com/paparazzi/paparazzi/issues/339
Cheers, Felix
On Mon, Dec 17, 2012 at 12:35 PM, Eric BAHIER <address@hidden>wrote:
Hi,
I try to kill my bug of BAT value on GCS.... it stil alive.....
I have 2 problems,
To have a good value (8V) I need to modify the adc value.....with
the documented function
<section name="BAT">
...
<define name="VOLTAGE_ADC_A" value="0.011"/>
<define name="VOLTAGE_ADC_B" value="0.635"/>
<define name="VoltageOfAdc(adc)" value ="(VOLTAGE_ADC_A * adc +
VOLTAGE_ADC_B)"/>
</section>
With this my first mistake is solve (or work around.... perhaps it is a
visible part of th iceberg....)
My real bug (I can not find any solution or work arround)
The BAT value is correctly read at power up, GCS give the good
infomation (if I use VoltageOfAdc...), Message windows give also the good
value.
If the BAT value change (LAB power supply can do it easly), the GCS an
Message value still th power up value... In Message windows the message is
updated, but with the power-up value....
This morning I have take My LISA/M, I have used the standard
fraser.....xml, I have juste change the IMU to my version, and comment the
prog mode to use the standard jtag interface.
This mornig I have updated my config (git pull, make clean, make) My
paparazzi version v4.9_devel-337-g34b46d2-dirty.
Anyone I have any idea where I have make the mistake......
Many thanks,
Eric
--
************************************
Lez Concept EURL
Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France
Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
--
************************************
Lez Concept EURL
Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France
Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing address@hiddenorghttps://lists.nongnu.org/mailman/listinfo/paparazzi-devel
--
************************************
Lez Concept EURL
Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France
Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
[Prev in Thread] | Current Thread | [Next in Thread] |