Hi,
In the past with booz (and near futur), I fly an hexa.... I had the
same problem.
The problem was an over load of the I2C bus, we put slower the data
refresh for 6 mkk esc...
I dont rember where we make it slower....
Have nice day,
Eric
Le 27/12/2012 01:54, Eduardo Lavratti a
écrit :
Hello,
anyone using 6 ou 8 MK esc with lisa/m ?
Today i put my lisa/m board on my BiG hexa.
This hexa fly very well with MK boards.
i have an mini octo that fly very well with mk boards too.
with lisa_m it fly some time and the lisa HANG resulting in crash.
in second test crashed again.
i make some tests in the bench.
i tested with big hexa setup and mini octo, all with i2c escs.
the result:
with 4 esc the lisa never hang.
With 6 esc lisa hang after some time
with 8 esc lisa hang much faster than with 6.
i think it is a i2c buffer problem again.
I remember i configured the buffer last year an tell felix about
this problem.
i will do more tests today.
regards.
_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
--
************************************
Lez Concept EURL
Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France
Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************