Re: [Paparazzi-devel] Bat value error and V4.9

[Eric BAHIER]

Hi felix,


After a week on the road, I am back to the lab....

I have make "git pull" and make now I am on : Paparazzi test version : 
v4.9_devel-326-g9b424ba -->


The today config for test :
Filght plan : Basic.xml
Setting : fixedwing_basic.xml
Telemetry : default_fixedwing.xml

With the actual <define name="VoltageOfAdc(adc)" value="(0.0635*adc)"/>  
The bat value are ok in value....

If I use a lab PSU in place of the bat, at power up the BAT value on 
Message and on GCS is ok, the Message refresh smell good,

If I change the PSU voltage ouput, the value in GCS and in Message still 
the power up value.....

It was good on 4.0.1....


I hope to be  clear....


regards,

many thaks,

Eric






Le 06/12/2012 10:52, address@hidden a écrit :
> Hi felix
>
>
> this is "my" version..
> v4.9_devel-311-g9ec9a92
>
> eric
>
> Felix Ruess <address@hidden> a écrit :
>
> > Hi Eric,
> >
> > please run ./paparazzi_version in the Paparazzi directory and provide 
> > the
> > exact version it outputs.
> > E.g. I tested with v4.9_devel-311-g9ec9a92
> >
> > On which version did it work?
> >
> > And I guess you accidentally provided the wrong airframe file, that 
> > one is
> > for a tiny0.99 with IR sensors...
> >
> > Cheers, Felix
> >
> >
> > On Thu, Dec 6, 2012 at 9:43 AM, <address@hidden> wrote:
> >
> > > Hi
> > >  felix,thank for your many many... help
> > >
> > > I use the V4.9 from the week begining...
> > >
> > > I hope to fly tomorow..
> > >
> > > the join file was good (for the bat problem) few weeks ago ..
> > >
> > >
> > > Regards,
> > >
> > > Eric
> > >
> > >
> > > Felix Ruess <address@hidden> a écrit :
> > >
> > >  Hi Eric,
> > > > can you please provide some more details?
> > > > Which exact paparazzi_version are you using? Can you post your 
> > > > airframe
> > > > file?
> > > >
> > > > I just checked with my Lisa/L 1.0 and the bat voltage follows my input
> > > > voltage just fine..
> > > >
> > > > Cheers, Felix
> > > >
> > > >
> > > > On Wed, Dec 5, 2012 at 7:24 PM, <address@hidden> wrote:
> > > >
> > > >  Hi,
> > > > > Now I can compile on lisaL and booz....
> > > > >
> > > > > On LisaL, I havea problem with the BAT on the  ground station.
> > > > >
> > > > > The ADC0 (pin14) really move (oscilloscope), the CPU has been 
> > > > > changed...
> > > > >
> > > > > On the PC the value of BAT (lab psu) it change on boot, but still 
> > > > > stable
> > > > > untill I reboot LisaL..
> > > > >
> > > > > After the boot, I can do anythink with my PSU, the ground station 
> > > > > still
> > > > > on
> > > > > the boot value...
> > > > >
> > > > >
> > > > > regards,
> > > > >
> > > > > Eric
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > > ______________________________****_________________
> > > > > Paparazzi-devel mailing list
> > > > > address@hidden
> > > > > https://lists.nongnu.org/****mailman/listinfo/paparazzi-****devel<https://lists.nongnu.org/**mailman/listinfo/paparazzi-**devel> 
> > > > >
> > > > > <https://lists.nongnu.**org/mailman/listinfo/**paparazzi-devel<https://lists.nongnu.org/mailman/listinfo/paparazzi-devel> 
> > > > >
> > > > > >
> > >
> > >
> > > _______________________________________________
> > > Paparazzi-devel mailing list
> > > address@hidden
> > > https://lists.nongnu.org/mailman/listinfo/paparazzi-devel
>
>
>
>
> _______________________________________________
> Paparazzi-devel mailing list
> address@hidden
> https://lists.nongnu.org/mailman/listinfo/paparazzi-devel

--
************************************
Lez Concept EURL

Eric BAHIER
15 chemin neuf
34 980 Montferrier sur LEZ
France

Tel : 33 4 67 59 92 53
Fax : 33 9 59 15 92 53
************************************

mentor_lisaL.xml
Description: Text Data