[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Paparazzi-devel] Lisa/L Baro setup
From: |
Eric BAHIER |
Subject: |
[Paparazzi-devel] Lisa/L Baro setup |
Date: |
Wed, 03 Oct 2012 20:56:06 +0200 |
User-agent: |
Mozilla/5.0 (Windows NT 6.1; WOW64; rv:15.0) Gecko/20120907 Thunderbird/15.0.1 |
hi,
Today I try NAV fly on the Quad with LISA/L (I have allready do it with
booz and LISA/M)
Every test has been done at sea level (field at 40m, lab at 50m)
The Altitude stay to groud... during manual fly....
With reading the RAWDATA, the AD is at 327xx... (15bits to 1).... if I
plug a tub and inspire.... the value go dowm up to -32xxx.
I had look with oscilloscope, the signal is to 3v (same as on the vale
on schematics);, but it allready the MAX for the ADC (ADS1114).
It's easly to change the first R divider to have a non-maximum value.
But before do it, I would like to know witch value has been tested
with success, and witch parameters must be change in the xml file?
Thank for your help,
Best regards,
Eric
- [Paparazzi-devel] Lisa m firmware upload problem help needed, Chris, 2012/10/02
- Re: [Paparazzi-devel] Lisa m firmware upload problem help needed, Chris, 2012/10/03
- [Paparazzi-devel] lisa m and ppm input, Cedric Marzer, 2012/10/03
- Re: [Paparazzi-devel] lisa m and ppm input, Gerard Toonstra, 2012/10/03
- Re: [Paparazzi-devel] lisa m and ppm input, privé, 2012/10/04
- Re: [Paparazzi-devel] lisa m and ppm input, Simon Wilks, 2012/10/04
- Re: [Paparazzi-devel] lisa m and ppm input, privé, 2012/10/04
- Re: [Paparazzi-devel] lisa m and ppm input, Gerard Toonstra, 2012/10/04
- Re: [Paparazzi-devel] lisa m and ppm input, MRSA, 2012/10/04
- Re: [Paparazzi-devel] lisa m and ppm input, Gerard Toonstra, 2012/10/04