paparazzi-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Paparazzi-devel] Stuck at Holding Point Block


From: AJ Kochevar
Subject: Re: [Paparazzi-devel] Stuck at Holding Point Block
Date: Sun, 12 Aug 2012 12:34:24 -0700

I said uplink.  Not downlink.  The gcs wouldn't even populate if you didn't have a downlink.

On Aug 12, 2012 12:31 PM, "Luiz Flavio Felizardo" <address@hidden> wrote:
I dont think link is the problem,
I ve used    ivyprobe '(.*)'   command on my terminal and I have plenty of messages comming and going, follow some examples:

Paparazzi server sent  'ground WAYPOINT_MOVED 15 10 -22.414307 -45.448538 75.000000'
Paparazzi server sent  'ground WAYPOINT_MOVED 15 11 -22.414096 -45.449770 75.000000'
Paparazzi server sent  'ground WAYPOINT_MOVED 15 12 -22.412289 -45.449764 75.000000'
Paparazzi server sent  'ground WAYPOINT_MOVED 15 13 -22.412294 -45.447821 75.000000'
Paparazzi server sent  'ground WAYPOINT_MOVED 15 14 -22.414101 -45.447827 75.000000'
Paparazzi server sent  'ground TELEMETRY_STATUS 15 0.015192'
Link sent  '15 GPS 0 612502016 0 0 -17000 0 0 0 218500 23 4'
Link sent  '15 WP_MOVED 6 453658.406250 -2478651.500000 75.000000 23'
Link sent  '15 BAT 0 124 0 0 1 218 0 0'
Link sent  '15 IMU_GYRO 0.008301 0.001953 -0.013672'
Link sent  '15 CALIBRATION 0.0 0'
Link sent  '15 PPM 0 0,0,0,0,0,0,0,0'
Link sent  '15 NAVIGATION 0 2 5671210.0 2478732.0 0.0 38306737815552.0 0 0'
Link sent  '15 GPS 0 612502016 0 0 -17000 0 0 0 218750 23 5'




On Sun, Aug 12, 2012 at 4:18 PM, AJ Kochevar <address@hidden> wrote:
Can you change a setting in the settings page, like a gain or something?  If not then it means you dont have an uplink.  Common problem, and solutions are outlined in the wiki and in this mailing list.  If so... then I dont know!

AJ

On Sun, Aug 12, 2012 at 12:12 PM, Luiz Flavio Felizardo <address@hidden> wrote:
Hello everyone! 
Does anybody have an idea why am I stuck at Holding Point Block? cant select the takeoff block :(
everything looks ok, but it doest let me select Takeoff!
GPS is 3D, Radio is ok, Link is ok...  >.>
Everything seems to be working perfectly. I can switch between modes normally, even start the engines in Auto1 and manual, all actuators are responding properly when moving the airplane around.

Any ideas?

Thanks Very Much!

_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel



_______________________________________________
Paparazzi-devel mailing list
address@hidden
https://lists.nongnu.org/mailman/listinfo/paparazzi-devel


reply via email to

[Prev in Thread] Current Thread [Next in Thread]