|
From: | Eduardo lavratti |
Subject: | Re: [Paparazzi-devel] PPM encoder not working. |
Date: | Fri, 10 Aug 2012 17:51:16 +0000 |
HUmmm
Um brasileiro usando PPZ Voce confirmou o tamanho do pulso grande que sai do encoder ? Quantos ms ele tem ? Date: Fri, 10 Aug 2012 12:39:15 -0300 From: address@hidden To: address@hidden Subject: [Paparazzi-devel] PPM encoder not working. Hello there everyone. I'm currently having some trouble with my PPM encoder. Well, actualy it seems to be working, When I turn on the radio the led start blinking at 3Hz like its supose to.
But when I go to the message from the ppz center it only shows me 0,0,0,0,0,0,0,0 , I've tested it with an osciloscope and it is sending signal properly, any idea on where the problem could be? I'm using this encoder: https://store.diydrones.com/product_p/br-ppme.htm
With this radio/receiver: http://www.ebay.com/itm/TH9x-FlySky-2-4Ghz-8CH-Transmitter-w-FS-R8B-Receiver-RC-/230594143182
My airframe file is: https://docs.google.com/document/pub?id=1nCEQUaPriHYOtmVJSvkuPc7jRh0dRgbDNOGLNzaY9a0
My radio file is: https://docs.google.com/document/pub?id=1w-ebhUPF_R0mTGcg1HtirEoZiFIwUtFYCeDFQW_7fuY (*I've tried both pulse_types) I'm using a Lisa/M and it does have a Led that indicates if the RC signal is ok. In my case the led is not on wich means problem, I supose. Thanks. _______________________________________________ Paparazzi-devel mailing list address@hidden https://lists.nongnu.org/mailman/listinfo/paparazzi-devel |
[Prev in Thread] | Current Thread | [Next in Thread] |